mRNA is not translated into DNA in normal cellular biology; instead, the flow of genetic information goes from DNA to mRNA (transcription) and then from mRNA to protein (translation). However, in the lab, you can reverse-transcribe mRNA into complementary DNA (cDNA) using the enzyme reverse transcriptase, a process that is essential for studying gene expression, cloning genes, and building cDNA libraries. This article explains the biological context, the lab procedure, and the key differences between natural translation and laboratory reverse transcription.
Formula
The calculator estimates the amount of cDNA you can obtain from a reverse transcription reaction. The key relationships are:
- cDNA mass (ng) = (amount of mRNA in µg) × 1000 × (yield fraction)
- cDNA moles (pmol) = (mass of mRNA in g) ÷ (average molar mass of mRNA in g/mol) × (yield fraction)
For the molar calculation, the average molar mass of a single-stranded RNA is approximated as 330 g/mol per nucleotide. Since 1 kb = 1000 nucleotides, the molar mass of an mRNA of length L kb is L × 1000 × 330 g/mol. The yield fraction (y/100) accounts for the fact that reverse transcription is not 100% efficient.
Worked Example
Using the default values from the calculator:
- Amount of mRNA = 1 µg
- Average mRNA length = 2.5 kb
- Yield of reverse transcription = 80%
Step 1: Calculate cDNA mass.
cDNA mass = 1 µg × 1000 × 0.80 = 800 ng
Step 2: Calculate moles of cDNA.
First, convert 1 µg to grams: 1 µg = 1 × 10-6 g.
Molar mass of mRNA = 2.5 kb × 1000 nucleotides/kb × 330 g/mol = 825,000 g/mol.
Moles of mRNA = (1 × 10-6 g) ÷ (825,000 g/mol) = 1.212 × 10-12 mol.
With 80% yield: moles of cDNA = 1.212 × 10-12 × 0.80 = 9.696 × 10-13 mol.
Convert to pmol: 9.696 × 10-13 mol × 1012 pmol/mol = 0.970 pmol.
The calculator rounds to 0.970 pmol.
Assumptions
- The average molecular weight of a ribonucleotide in RNA is 330 g/mol (free acid, not sodium salt).
- The mRNA is fully intact and the reverse transcriptase copies the entire length.
- The yield percentage accounts for losses during the reaction, but not for subsequent purification steps.
- The calculation assumes a 1:1 copy of mRNA to cDNA (i.e., each mRNA molecule yields one cDNA molecule).
Why Reverse Transcription Is Not “Translation”
In biology, translation is the process by which ribosomes read mRNA and synthesize a protein. It is a completely different process from reverse transcription. Translation occurs in the cytoplasm of cells, uses tRNA and ribosomes, and produces a polypeptide chain. Reverse transcription, on the other hand, is a lab technique that converts RNA into DNA. It is called “reverse” because it goes against the central dogma (DNA → RNA → protein).
Reverse transcriptase is an enzyme found naturally in retroviruses (like HIV) and in some cellular elements (like telomerase). In the lab, it is used to make cDNA from mRNA, which is then stable and can be amplified by PCR, cloned, or sequenced.
How Reverse Transcription Works
The process involves several steps:
- Primer annealing: A short DNA primer (oligo-dT, random hexamers, or a gene-specific primer) binds to the mRNA template. Oligo-dT primers bind to the poly-A tail of eukaryotic mRNA, while random hexamers bind at random points.
- Extension: Reverse transcriptase synthesizes a complementary DNA strand by adding nucleotides in the 5′→3′ direction, using the mRNA as a template.
- RNA removal: The RNA template is degraded (often by RNase H) or the mRNA is removed by alkaline hydrolysis.
- Second-strand synthesis: To make double-stranded cDNA, a second DNA strand is synthesized using the first cDNA as a template (often by DNA polymerase).
The result is double-stranded cDNA that can be inserted into plasmids, used as a template for PCR, or used in microarrays.
Common Uses of cDNA
cDNA is widely used in molecular biology:
- Gene expression analysis: cDNA is used in quantitative PCR (qPCR) to measure mRNA levels.
- Cloning: cDNA can be inserted into expression vectors to produce recombinant proteins.
- Library construction: cDNA libraries represent the expressed genes of a cell or tissue at a specific time.
- RNA sequencing: In RNA-seq, mRNA is converted to cDNA before sequencing.
Limitations and Pitfalls
Reverse transcription is not perfect. Common issues include:
- Incomplete synthesis: Long mRNAs or those with strong secondary structures may not be fully copied.
- Primer bias: Oligo-dT primers only work on polyadenylated mRNA; random hexamers may amplify ribosomal RNA if not removed.
- Enzyme processivity: Different reverse transcriptases have different processivities and optimal temperatures.
- RNA degradation: RNases can degrade the mRNA before reverse transcription, leading to shorter cDNA.
To minimize these issues, use RNase-free reagents, denature RNA secondary structures by heating, and choose the appropriate primer and enzyme for your application.
Frequently Asked Questions
Can mRNA be translated into DNA inside a cell?
No. In cells, the flow of genetic information is DNA → RNA → protein. Reverse transcription occurs only in retroviruses and in specific lab settings. Cells do not normally convert mRNA back into DNA; this would violate the central dogma of molecular biology.
What is the difference between cDNA and genomic DNA?
cDNA is synthesized from mature mRNA, so it lacks introns and contains only the exons (coding sequences) of a gene. Genomic DNA contains both introns and exons, as well as regulatory sequences. cDNA is often used for expressing proteins in bacteria because bacteria cannot splice out introns.
Why do we use reverse transcriptase instead of DNA polymerase?
DNA polymerase requires a DNA template; it cannot use RNA as a template. Reverse transcriptase is a special RNA-dependent DNA polymerase that can synthesize DNA from an RNA template. This is essential for studying RNA viruses and for analyzing gene expression.
How much cDNA do I need for PCR?
For a typical PCR, you need about 1-10 ng of cDNA per reaction. The calculator above can help you estimate how much cDNA you will generate from your mRNA input. For qPCR, you may need less, often 1-100 ng per well depending on the abundance of your target gene.
Can I use the same primer for reverse transcription and PCR?
Usually not. The reverse transcription primer (e.g., oligo-dT) is used to generate the first cDNA strand. For PCR, you need specific forward and reverse primers that flank your region of interest. However, if you use a gene-specific primer for reverse transcription, it can be the same as the reverse primer for PCR, but you still need a forward primer.
What is the average length of mRNA?
Human mRNAs average about 2-3 kb in length, but this varies widely. Some mRNAs are less than 1 kb, while others exceed 10 kb. The average length you use in the calculator should be based on your specific gene or sample.
Related
Formula used
in m | Amount of mRNA | µg | 1 | 0 in l | Average mRNA length | kb | 2.5 | 0.001 in y | Yield of reverse transcription | % | 80 | 0.001 out cdna | Amount of cDNA produced | ng | m * 1000 * (y / 100) | 1 out mol | Moles of cDNA | pmol | (m * 1e-6) / (l * 1000 * 330) * (y / 100) * 1e12 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check