molecalculator

Moles & Molar Mass

Nitric Acid Molar Mass: Formula and Calculator

Calculator No. 01-3641 · Updated · Formula and assumptions shown below

Amount of HNO3 1.0000 mol
Molecules of HNO3
6.022 × 1023 molecules
Result, rounded to 3 decimal places
Nitric acid mass
63.012 g
Set in the form below
Nitric acid molar mass
63.012 g/mol
Set in the form below
You enter
Nitric acid mass (g), Nitric acid molar mass (g/mol)
You get
Amount of HNO3 (mol), Molecules of HNO3 (molecules)
Rounding
4 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass (often called molecular weight, or MW) of nitric acid, HNO₃, is 63.012 g/mol using standard atomic weights. Enter a sample mass and this molar mass in the calculator below to find the amount of nitric acid in moles; it also reports the corresponding number of molecules.

Formula

The calculator uses amount in moles = sample mass ÷ molar mass, or n = m / M. Here, n is the amount of HNO₃ in moles (mol), m is the sample mass in grams (g), and M is its molar mass in grams per mole (g/mol). The numerical value for the compound is calculated from its atoms: M(HNO₃) = 1(1.008) + 1(14.007) + 3(15.999) = 63.012 g/mol. The molecule count is N = n × NA, where N is the number of molecules and NA is Avogadro’s exact constant, 6.02214076 × 10²³ mol⁻¹.

Worked Example

Using the calculator’s default values, the sample mass is 63.012 g and the molar mass is 63.012 g/mol.

  1. Amount: n = 63.012 g ÷ 63.012 g/mol = 1.0000 mol.
  2. Molecules: N = 1.0000 mol × 6.02214076 × 10²³ mol⁻¹ = 6.022 × 10²³ molecules.

The displayed results are 1.0000 mol and 6.022 × 10²³ molecules. The mass and molar mass have matching numerical values, so this example contains one mole.

Assumptions

  • The sample mass represents pure HNO₃, not a commercial aqueous solution.
  • The calculation uses the stated standard atomic weights and treats the sample’s composition as HNO₃.
  • Moles and molecule counts are calculated from the supplied mass; the calculator does not account for impurities, concentration, or measurement uncertainty.

What Molecular Weight Means

In everyday chemistry, “molecular weight” commonly means the molar mass expressed in g/mol. Strictly, relative molecular mass is a dimensionless ratio, while molar mass has units. For nitric acid, the practical answer to “What is the MW?” is therefore 63.012 g/mol. A single HNO₃ molecule has a mass corresponding to about 63.012 unified atomic mass units (u), while one mole of those molecules has a mass of about 63.012 grams.

The number is based on the conventional atomic weights H = 1.008, N = 14.007, and O = 15.999. The subscripts in HNO₃ matter: each molecule contains one hydrogen atom, one nitrogen atom, and three oxygen atoms. Oxygen contributes 47.997 g/mol of the total, which is why counting all three oxygen atoms is essential.

How to Use the Calculator

Enter the mass of pure nitric acid in grams and, if needed, replace the molar-mass value with another value appropriate to your calculation. The default mass is 63.012 g, chosen to make the worked example easy to check. The result gives moles, followed by the number of HNO₃ molecules represented by that amount.

  • For 1 g of pure HNO₃: 1 ÷ 63.012 ≈ 0.01587 mol.
  • For 10 g: 10 ÷ 63.012 ≈ 0.1587 mol.
  • For 0.500 mol: the corresponding pure-acid mass is 0.500 × 63.012 = 31.506 g.

The calculator accepts mass and molar mass as inputs and calculates amount. It does not calculate the mass of a solution, acidity, pH, or the quantity of acid in a bottle whose concentration is unknown.

Pure Nitric Acid Versus Acid Solution

A key distinction is whether a mass refers to pure HNO₃ or to an aqueous nitric acid solution. Concentrated nitric acid sold for laboratory use is typically a mixture of acid and water, so a gram of that solution is not a gram of HNO₃. To find the amount of acid in a solution, its mass fraction or concentration must also be known. For example, with a mass fraction w, the pure-acid mass is solution mass × w; only then can that acid mass be divided by 63.012 g/mol.

For a solution labeled by molarity, use its volume and concentration instead: amount in moles equals molarity in mol/L multiplied by solution volume in liters. Convert milliliters to liters by dividing by 1000. Do not apply the pure-substance mass calculation to a solution’s total mass as if the solution were entirely HNO₃.

Common Errors and Limits

  • Miscounting oxygen: HNO₃ contains three oxygen atoms, not one. Its formula gives 1.008 + 14.007 + 3 × 15.999 = 63.012 g/mol.
  • Confusing grams with moles: grams measure mass; moles count chemical amount. Divide grams by g/mol to obtain moles.
  • Using solution mass as pure-acid mass: water and other components contribute to the solution’s mass but not to the HNO₃ amount.
  • Overinterpreting precision: 63.012 g/mol follows from the specified atomic-weight values. Actual sample measurements may be less precise, and natural isotopic variation and reagent purity affect practical results.

The calculator is a stoichiometric conversion, not an assay. It assumes the entered mass and molar mass describe the substance correctly. If purity, concentration, or uncertainty matters, use those data explicitly; do not infer them from the formula alone.

Safety and Scope

Nitric acid is corrosive and can cause severe chemical burns; concentrated acid is also a strong oxidizer. This page provides arithmetic only, not directions for handling, diluting, or using acid. In any laboratory context, follow your lab method, the safety data sheet (SDS), and your supervisor. Consult the substance’s current SDS and applicable local requirements before work involving nitric acid.

Frequently Asked Questions

What is the MW of nitric acid?
The molar mass of HNO₃ is 63.012 g/mol using H = 1.008, N = 14.007, and O = 15.999.

How do you calculate the molar mass of HNO₃?
Add the atomic masses in its formula: 1.008 + 14.007 + 3(15.999) = 63.012 g/mol.

How many moles are in 1 gram of nitric acid?
For pure HNO₃, 1 g ÷ 63.012 g/mol ≈ 0.01587 mol. A gram of acid solution contains less nitric acid unless it is pure.

Is the molecular weight of nitric acid 63 or 63.01?
Both are rounded forms of the same value. The more precise result from the atomic weights used here is 63.012 g/mol; 63.01 g/mol is rounded to two decimal places.

Does nitric acid solution have the same molar mass as HNO₃?
HNO₃ itself has a molar mass of 63.012 g/mol. A solution also contains water, so its total mass cannot be converted to moles of HNO₃ without knowing the acid concentration or mass fraction.

Related

Formula used
in m | Nitric acid mass | g | 63.012 | 0
in n | Nitric acid molar mass | g/mol | 63.012 | 0.001
out mol | Amount of HNO3 | mol | m / n | 4
out molecules | Molecules of HNO3 | molecules | mol * 6.02214076e23 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →