molecalculator

Moles & Molar Mass

Nitric Acid Molar Mass: Formula and Calculation

Calculator No. 01-3643 · Updated · Formula and assumptions shown below

Molar mass of nitric acid 63.012 g/mol
Mass
63.012 g
= Amount of nitric acid × Molar mass of nitric acid
Amount of nitric acid
1 mol
Set in the form below
You enter
Amount of nitric acid (mol)
You get
Molar mass of nitric acid (g/mol), Mass (g)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Nitric acid (HNO₃) has a molar mass of 63.012 g/mol, commonly reported as 63.01 g/mol. This calculator works it out from the formula and the standard atomic weights of hydrogen, nitrogen, and oxygen; enter the number of moles to find the corresponding mass in grams.

Formula

The molar mass is the sum of the atomic weights in the molecular formula:

M(HNO₃) = 1 × Aᵣ(H) + 1 × Aᵣ(N) + 3 × Aᵣ(O)

  • M(HNO₃) is nitric acid’s molar mass, in grams per mole (g/mol).
  • Aᵣ(H) = 1.008 is the abridged standard atomic weight of hydrogen.
  • Aᵣ(N) = 14.007 is the abridged standard atomic weight of nitrogen.
  • Aᵣ(O) = 15.999 is the abridged standard atomic weight of oxygen.

For a sample, mass is calculated with m = n × M, where m is mass in grams, n is amount in moles, and M is molar mass in g/mol. The calculator reports molar mass first, then the mass corresponding to the entered amount.

Worked Example

Using the default input of 1 mol:

  1. Hydrogen contributes: 1 × 1.008 = 1.008 g/mol.
  2. Nitrogen contributes: 1 × 14.007 = 14.007 g/mol.
  3. Oxygen contributes: 3 × 15.999 = 47.997 g/mol.
  4. Add the contributions: 1.008 + 14.007 + 47.997 = 63.012 g/mol, displayed to three decimal places.
  5. Calculate the mass: 1 mol × 63.012 g/mol = 63.012 g, displayed to three decimal places.

Assumptions

  • The formula represents pure nitric acid, HNO₃, with one hydrogen, one nitrogen, and three oxygen atoms per molecule.
  • The calculation uses abridged standard atomic weights; natural isotopic composition can cause small variations in measured samples.
  • The amount is entered in moles, and the calculated mass is a formula-based value. It does not determine the concentration or purity of a solution.

What the Formula Tells You

Molar mass connects a count of chemical entities, expressed in moles, to a measurable mass. One mole contains exactly 6.02214076 × 1023 specified entities. Thus, one mole of HNO₃ molecules has a mass of about 63.012 g. The numerical value in g/mol is also the formula mass expressed in atomic mass units per molecule, though the units describe different scales.

The chemical formula matters: the subscript 3 applies only to oxygen, so oxygen’s contribution must be multiplied by three. There is one hydrogen atom and one nitrogen atom. The result is the molar mass of molecular nitric acid, not the mass of a nitrate ion (NO₃⁻), a salt such as sodium nitrate, or a solution containing nitric acid and water.

For a different amount, multiply by 63.012 g/mol. For example, 0.250 mol corresponds to 0.250 × 63.012 = 15.753 g of pure HNO₃. Conversely, if you know the mass, divide it by 63.012 g/mol to calculate the amount in moles. Keep enough digits during intermediate calculations and round only the final answer to match the precision of the input or measurement.

Using Molar Mass in Solution Calculations

Molar mass is one part of converting between a solution’s volume, concentration, and the amount of solute. For a solution with molar concentration C in mol/L and volume V in liters, the amount is n = C × V; the corresponding pure-solute mass is m = n × 63.012 g/mol. If volume is provided in milliliters, convert it to liters by dividing by 1000 before using that relationship.

This arithmetic does not mean a measured mass of commercial nitric acid solution is all HNO₃. Such a solution also contains water, and its concentration or mass fraction must be known to relate the total solution mass to the amount of acid. Molar mass alone cannot supply that missing composition information. Nor does the calculation describe a procedure for preparing or handling acid. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

Common Errors and Rounding

  • Forgetting the oxygen subscript: HNO₃ contains three oxygen atoms, contributing 47.997 g/mol, not 15.999 g/mol.
  • Mixing up mass and molar mass: 63.012 g/mol is a property per mole; the mass depends on how many moles are present.
  • Confusing acid with solution: the molar mass applies to HNO₃ molecules, not to the combined mass of an aqueous solution.
  • Rounding too early: retain the atomic-weight contributions through the sum, then round the final result. A two-decimal report is 63.01 g/mol; a three-decimal report is 63.012 g/mol.

The displayed precision is a calculation convention, not a claim that every real sample or measurement is known to a thousandth of a gram per mole. When using experimental mass and volume data, significant figures and measurement uncertainty affect the precision of the final result.

Frequently Asked Questions

What is the molar mass of HNO₃?
It is 63.012 g/mol using H = 1.008, N = 14.007, and O = 15.999. It is often rounded to 63.01 g/mol.

How do you calculate nitric acid’s molar mass?
Add the atomic weights for the atoms in HNO₃: 1.008 + 14.007 + 3(15.999) = 63.012 g/mol.

How many grams are in one mole of nitric acid?
One mole of pure HNO₃ has a calculated mass of about 63.012 g.

Is 63.01 g/mol the molar mass of nitric acid solution?
No. It is the molar mass of HNO₃ itself. A solution’s total mass includes its solvent and depends on the solution’s composition.

Why might another source show a slightly different value?
Sources may use different atomic-weight rounding or report fewer decimal places. Values such as 63.01 and 63.012 g/mol are consistent when rounded appropriately.

Related

Formula used
in n | Amount of nitric acid | mol | 1 | 0
out mm | Molar mass of nitric acid | g/mol | 1.008 + 14.007 + 3 * 15.999 | 3
out m | Mass | g | n * mm | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →