molecalculator

Moles & Molar Mass

Nuclear Decay Equation Calculator and Formula

Calculator No. 01-5234 · Updated · Formula and assumptions shown below

Amount remaining 125.00 atoms
Amount decayed
875.00 atoms
= Initial amount − Amount remaining
Fraction remaining
0.125000
= Amount remaining ÷ Initial amount
Initial amount
1000 atoms
Set in the form below
You enter
Initial amount (atoms), Half-life (s), Elapsed time (s)
You get
Amount remaining (atoms), Amount decayed (atoms), Fraction remaining
Rounding
2 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A nuclear decay equation calculator predicts how much of a radioactive isotope remains after a chosen time, using its starting amount and half-life. Enter those values and the elapsed time to get the remaining amount, the amount that has decayed, and the fraction remaining.

Formula

The calculator uses the radioactive-decay law, which assumes that each nucleus has a constant probability of decaying per unit time:

N = N0e−λt = N0e−ln(2)t/T1/2

  • N is the expected amount of the original nuclide remaining, in the same amount units as the input.
  • N0 is the initial amount, entered here as atoms.
  • t is elapsed time, in seconds.
  • T1/2 is the half-life, in seconds.
  • λ is the decay constant, in s−1; λ = ln(2)/T1/2.

The calculator uses 0.6931471805599453 as the numerical value of ln(2). The additional outputs are N0 − N, the expected amount that has decayed, and N/N0, the fraction remaining. Use matching time units for elapsed time and half-life; this calculator does not convert years, days, or other units automatically.

Worked Example

With the default inputs, the initial amount is 1000 atoms, the half-life is 10 seconds, and the elapsed time is 30 seconds. First calculate the exponent:

−0.6931471805599453 × 30 / 10 = −2.079441541679836

Then calculate the amount remaining:

N = 1000 × exp(−2.079441541679836) = 125.00 atoms

Amount decayed = 1000 − 125 = 875.00 atoms. Fraction remaining = 125 / 1000 = 0.125000, or 12.5%. Three half-lives have passed, so one eighth of the original amount remains.

Assumptions

  • Decay is spontaneous and follows a constant exponential decay rate.
  • The entered half-life is appropriate for the isotope and is expressed in seconds.
  • The amount is treated as a continuous expected value. Actual samples contain whole nuclei and can differ through random statistical variation.
  • The calculation concerns the original nuclide only; it does not model daughter products, branching, or external sources of the isotope.

What a Nuclear Decay Equation Calculator Is For

This calculation is useful for estimating the remaining quantity of a radionuclide after storage, a geological interval, or another specified duration. It also helps compare how quickly different isotopes decay: a shorter half-life means a larger fraction decays over the same interval. The output is a mathematical estimate, not a measurement of a particular sample.

The amount can be atoms, moles, or mass, provided the starting amount and the remaining amount use the same unit. The supplied calculator labels the amount in atoms. If you instead apply the equation to a mass or number of moles of a single nuclide, the same fraction applies, because radioactive decay reduces the number of original nuclei proportionally. Conversion between atoms and moles uses Avogadro’s constant, exactly 6.02214076 × 1023 entities per mole.

For example, a sample with a half-life of 8 days has 25% of its original nuclide left after 16 days, because two half-lives have elapsed. This result does not mean the sample contains no radioactive material after a few half-lives; the amount continues to decrease asymptotically.

Half-Life, Decay Constant, and Activity

A half-life is the time required for the expected number of undecayed nuclei to fall to half its initial value. It is characteristic of a particular nuclear state and is not the time for every individual atom to decay. For a single nucleus, the exact decay time is unpredictable; the exponential law describes the statistics of a large population.

The decay constant λ expresses probability of decay per unit time. The relation λ = ln(2)/T1/2 means a long half-life corresponds to a small decay constant. When time and half-life use the same unit, their ratio t/T1/2 is dimensionless, as required by the exponential function.

Activity is related but not identical to the amount remaining. It is the rate of nuclear transformations, A = λN, measured in becquerels, where 1 Bq equals 1 decay per second. As N falls, activity falls in the same proportion if the isotope and decay mode remain unchanged. This calculator does not output activity; calculating it requires λ in s−1 and N as a number of radioactive nuclei.

Using the Result and Choosing Units

Choose a half-life value from a reliable nuclear-data reference for the exact isotope, then convert both time inputs to seconds before entering them. For instance, if a reference gives a half-life in years, convert the elapsed duration to the same year convention and convert both to seconds. The number of seconds assigned to a year can depend on the convention; state that convention when a result needs high precision.

  • For a simple decay fraction, enter any positive initial amount; the fraction remaining depends on elapsed time divided by half-life, not on the starting amount.
  • For elapsed time equal to one half-life, expect half the initial amount. At two half-lives, expect one quarter; at three, one eighth.
  • Read the decayed amount as the difference between the initial and remaining amounts, not as a separate isotope quantity.
  • Keep enough significant figures in the half-life and time inputs for the precision the problem requires. The displayed decimals are not a claim that the underlying data are exact.

The default half-life is only a demonstration value, not a reference value for a named isotope. Replace it with the evaluated half-life for the nuclide of interest. A calculator cannot determine which isotope is present or identify the correct half-life from a chemical element alone; isotopes of the same element can have very different nuclear properties.

Limits and Common Misconceptions

The equation models a single radioactive nuclide with a fixed decay constant. It does not by itself describe a decay chain, where daughter nuclei are also radioactive, or a mixture of isotopes with different half-lives. Those cases require separate equations for each nuclide and, for a decay chain, coupled calculations that account for production and decay of intermediate daughters.

A common mistake is to interpret half-life as a deadline after which all of a sample disappears. Exponential decay predicts that a constant fraction, rather than a constant number, decays in each half-life. Another mistake is mixing units—for example, entering 2 years as the elapsed time while entering the half-life in seconds. The equation will still produce a number, but it will be meaningless because the units do not match.

For very small samples, the expected remaining amount can be fractional even though nuclei are discrete. A result such as 0.4 atoms means an expectation across equivalent samples or repeated outcomes, not a literal fraction of a nucleus in one sample. For small populations, random variation can be substantial.

Frequently Asked Questions

What is the equation for nuclear decay?
N = N0e−λt, where N0 is the initial number of nuclei, t is elapsed time, and λ is the decay constant. If half-life is known, substitute λ = ln(2)/T1/2.

How do I calculate how much radioactive material remains?
Divide elapsed time by the half-life, then use N = N0(1/2)t/T1/2. Make sure both times use the same unit and use a half-life for the exact isotope.

Can I use years instead of seconds?
Yes, if the elapsed time and half-life are both entered in years. This calculator’s unit label is seconds, so convert both values to seconds before using it; do not mix units.

Does half-life tell me when an atom will decay?
No. It describes the statistical behavior of a population. It does not predict the decay time of an individual nucleus.

Is the amount decayed the same as activity?
No. Amount decayed is a quantity of nuclei lost over an interval. Activity is the rate of decays at a particular time and is measured in becquerels.

Related

Formula used
in n0 | Initial amount | atoms | 1000 | 0
in h | Half-life | s | 10 | 0.000000000001
in t | Elapsed time | s | 30 | 0
out n | Amount remaining | atoms | n0 * exp(-0.6931471805599453 * t / h) | 2
out d | Amount decayed | atoms | n0 - n | 2
out f | Fraction remaining | - | n / n0 | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →