molecalculator

Moles & Molar Mass

OCR A Level Chemistry Reaction Mechanisms

Calculator No. 01-11993 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

OCR A Level Chemistry reaction mechanisms are the step-by-step sequences of bond breaking and bond forming that show how reactants become products, including the movement of electrons. You need to know the mechanisms for alkanes, alkenes, haloalkanes, alcohols, carbonyls, carboxylic acids, and arenes, and be able to draw them using curly arrows, dipoles, and relevant intermediates.

Formula

The molarity (concentration in mol/L) is calculated from the mass of solute, its molar mass, and the final volume of the solution:

c = m / (M × V)

  • c = molarity (mol/L, also written M)
  • m = mass of solute (g)
  • M = molar mass of solute (g/mol)
  • V = final volume of solution (L)

Note that the volume must be in litres, so if you measure in millilitres, divide by 1000 first.

Worked Example

Using the default values from the calculator: dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in water and make the final volume up to 250 mL.

Step 1: Convert volume to litres: 250 mL = 250 / 1000 = 0.250 L

Step 2: Calculate moles of NaCl: moles = mass / molar mass = 2.922 g / 58.44 g/mol = 0.05000 mol

Step 3: Calculate molarity: c = moles / volume = 0.05000 mol / 0.250 L = 0.2000 mol/L

So the molarity is 0.2000 M, which is 200.0 mM. The calculator shows 0.2000 mol/L and 200.0 mM.

Assumptions

  • The solute is pure and completely dissolves without changing volume.
  • The final volume is the total volume after dissolution, not the volume of solvent added.
  • Temperature is not considered because molarity is based on volume, which can change slightly with temperature.
  • For ionic compounds like NaCl, this calculation gives the formula unit concentration, not the individual ion concentrations (which would be 0.2000 M for Na⁺ and 0.2000 M for Cl⁻).

Why Reaction Mechanisms Matter in OCR A Level Chemistry

OCR A (Salters) and OCR B (Advanced) specifications both require you to recall and apply a set of reaction mechanisms. These mechanisms explain how and why reactions occur, and they are a major source of exam marks. You need to know the reagents, conditions, and the type of mechanism (e.g., nucleophilic substitution, electrophilic addition) for each reaction. Drawing mechanisms correctly shows the examiner that you understand the electron movement, not just the reactants and products.

Key Mechanisms You Must Know for OCR A

Here is a list of the core mechanisms that appear in the OCR A specification. For each, you should know the reagents, conditions, and be able to draw the curly arrows.

  • Free-radical substitution – alkanes with halogens in UV light. Three steps: initiation (homolytic fission of Cl–Cl), propagation (two steps that repeat), and termination (two radicals combine).
  • Electrophilic addition – alkenes with HBr, H₂SO₄, or Br₂. The π bond attacks the electrophile, forming a carbocation intermediate, then the nucleophile attacks.
  • Nucleophilic substitution – haloalkanes with aqueous hydroxide (OH⁻) to form alcohols, or with ammonia (NH₃) to form amines. Two possible mechanisms: SN1 (via carbocation) and SN2 (one step, backside attack).
  • Elimination – haloalkanes with ethanolic hydroxide to form alkenes. The hydroxide acts as a base, removing a hydrogen and a halogen from adjacent carbons.
  • Nucleophilic addition – aldehydes and ketones with HCN (in the presence of KCN) to form hydroxynitriles. The nucleophile is CN⁻, and the intermediate is an alkoxide ion.
  • Nucleophilic addition–elimination – acyl chlorides with water, alcohols, or ammonia. The nucleophile adds, then a chloride ion is eliminated.
  • Electrophilic substitution – benzene with halogens, nitric acid, or acyl chlorides in the presence of a halogen carrier (e.g., AlCl₃ or FeBr₃). The electrophile is generated in situ.

How to Draw Curly Arrows Correctly

Curly arrows (curly half-arrows for radicals) show the movement of electron pairs. The arrow starts at the electron source (a lone pair or a bond) and points to the electron sink (where the electrons end up). Common mistakes include starting arrows from positive charges (which have no electrons) or pointing arrows at atoms instead of bonds. For OCR, you must draw the dipole on polar bonds (e.g., δ+ on C, δ− on Br in a haloalkane) and show the intermediate (carbocation, radical, or transition state) if asked.

How to Choose the Correct Mechanism

When faced with a reaction, ask yourself:

  • What functional group is present? (alkene, haloalkane, carbonyl, etc.)
  • What reagent is added? (HBr, NaOH, H₂SO₄, etc.)
  • What are the conditions? (aqueous vs. ethanolic, UV light, heat, catalyst)
  • Is the reagent a nucleophile, electrophile, or radical?

For example, if you see a haloalkane with aqueous NaOH, it is nucleophilic substitution (SN2 for primary, SN1 for tertiary). If you see ethanolic NaOH, it is elimination. For alkenes with HBr, it is electrophilic addition, and the major product follows Markovnikov’s rule (hydrogen adds to the carbon with more hydrogens).

Common Mistakes and Misconceptions

Students often confuse the two types of substitution. SN1 involves a carbocation intermediate and is favoured by tertiary haloalkanes; SN2 is a one-step backside attack and is favoured by primary haloalkanes. Another common error is forgetting to show the lone pair on the nucleophile when it attacks. Also, in electrophilic addition to alkenes, the π bond must attack the electrophile, not the other way round. For benzene, you must show the delocalised ring (the circle) and the regeneration of the aromatic ring after substitution – do not leave a positive charge on the ring.

Frequently Asked Questions

Do I need to know the SN1 and SN2 mechanisms for OCR A?
Yes, OCR A expects you to know both mechanisms for nucleophilic substitution, though the specification sometimes refers to them as “nucleophilic substitution” without naming SN1/SN2. You should be able to draw the mechanism for a given haloalkane and explain why primary haloalkanes react via SN2 and tertiary via SN1.

What is the difference between curly arrows and fish-hook arrows?
Curly arrows (full arrows) represent the movement of an electron pair. Fish-hook arrows (half-headed) represent the movement of a single electron, used in radical mechanisms like free-radical substitution. Use the correct arrow type – mixing them up loses marks.

Why does benzene undergo substitution rather than addition?
Benzene has a delocalised π system that makes it more stable than a hypothetical cyclohexatriene. Addition would break the aromaticity and lose that stability, so benzene prefers electrophilic substitution, which retains the aromatic ring.

How do I know which product is major in electrophilic addition to alkenes?
Use Markovnikov’s rule: the hydrogen atom attaches to the carbon of the double bond that already has more hydrogen atoms, and the halogen (or other group) attaches to the carbon with fewer hydrogens. This is because the more substituted carbocation intermediate is more stable.

Are there any mechanisms for alcohols?
Alcohols can undergo elimination to form alkenes (with concentrated H₂SO₄ or Al₂O₃) and substitution to form haloalkanes (with PCl₅, SOCl₂, or HX). These are typically covered, but the key mechanisms in OCR A are the ones listed above.

Will I be asked to draw a mechanism from memory in the exam?
Yes, OCR exams often ask you to draw a mechanism for a reaction you have learned. You may also be asked to apply a known mechanism to a new molecule, so understanding the electron flow is more important than memorising one specific example.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →