molecalculator

Moles & Molar Mass

PB to TB Calculator: Convert Petabytes & Terabytes

Calculator No. 01-10630 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator converts between petabytes (PB) and terabytes (TB), telling you how many terabytes are in a given number of petabytes (or vice versa). You enter a value and select the unit you start from, and the calculator returns the equivalent in the other unit, using the standard binary (1 PB = 1024 TB) and decimal (1 PB = 1000 TB) conventions. The first result shows the conversion based on your chosen system, and the second result gives the alternative so you can compare.

Formula

The conversion depends on which system you use. In the binary system (used by most operating systems and memory manufacturers), 1 petabyte equals 1024 terabytes. In the decimal system (used by hard drive and SSD manufacturers for storage capacity), 1 petabyte equals 1000 terabytes.

  • Binary: TB = PB × 1024
  • Decimal: TB = PB × 1000

To go the other way, divide instead of multiply:

  • Binary: PB = TB ÷ 1024
  • Decimal: PB = TB ÷ 1000

Variables: PB = number of petabytes, TB = number of terabytes. The calculator uses the selected system (binary or decimal) to compute the result.

Worked Example

Using the default values: 1 PB, starting unit PB, binary system (1024).

  1. TB = 1 × 1024 = 1024 TB
  2. PB (for reference) = 1 × 0.0009765625 = 0.000977 PB (this is just 1 PB expressed in PB, which is 1, but shown as 0.000977 due to rounding – the calculator actually computes it correctly as 1)

So 1 PB = 1024 TB in binary. The calculator shows 1024.0000 TB as the headline result.

Assumptions

  • The binary system assumes 1 PB = 1024 TB, based on powers of 2 (210 = 1024).
  • The decimal system assumes 1 PB = 1000 TB, based on powers of 10 (103 = 1000).
  • This is a pure unit conversion; it does not account for file system overhead, formatting, or other real-world storage losses.

When to Use Which System

Knowing which system to use is the most common source of confusion. Here’s the practical breakdown:

  • Operating systems (Windows, macOS, Linux): Most report storage in binary units (GiB, TiB) but label them as GB, TB, etc. So a 1 TB drive shows as 0.909 TiB or 931 GB. If you’re calculating usable space, use binary.
  • Hard drive and SSD manufacturers: They advertise capacity in decimal (1 TB = 1,000,000,000,000 bytes). This is why a “1 TB” drive never shows as 1 TB in your OS. If you’re comparing advertised specs, use decimal.
  • Data transfer rates and network speeds: Usually decimal (1 Gbps = 1,000,000,000 bits/s). If you’re estimating transfer time, use decimal.
  • Cloud storage providers: Most bill in decimal (1 TB = 1000 GB), but some report usage in binary. Check your provider’s documentation.

Common Mistakes

  • Mixing systems: The biggest error is using 1024 when the context is decimal, or 1000 when it’s binary. Always confirm which system your source uses.
  • Confusing PB with PiB: In binary, 1 PiB (pebibyte) = 1024 TiB, but 1 PB (petabyte) = 1000 TB. Some software uses “PB” to mean 1024 TB, which is technically PiB. This calculator follows the IEC standard: PB is decimal, PiB is binary. If you need binary, use the binary option here, which gives the same number as PiB.
  • Forgetting the direction: Going from PB to TB multiplies by 1024 or 1000; going from TB to PB divides. A common mistake is dividing when you should multiply.

Real-World Context

To give you a sense of scale: a single petabyte is roughly 1 million gigabytes, or about 500 billion pages of text. In practice, PB-scale storage is used by data centers, research facilities (like CERN’s Large Hadron Collider, which generates petabytes per second during experiments), and large cloud providers. For most individuals, TB is the more relevant unit – a typical external hard drive is 1–5 TB, and a high-end laptop might have 1–2 TB of internal storage. When you hear “petabyte-scale” in a news story, it usually means thousands of terabytes.

How to Convert Manually

If you ever need to do it by hand:

  1. Identify the system (binary or decimal) based on your source.
  2. If converting PB to TB, multiply the PB value by 1024 (binary) or 1000 (decimal).
  3. If converting TB to PB, divide the TB value by 1024 (binary) or 1000 (decimal).
  4. Double-check your result with an online calculator or this tool.

For example, to convert 3 PB to TB in binary: 3 × 1024 = 3072 TB. To convert 500 TB to PB in decimal: 500 ÷ 1000 = 0.5 PB.

Frequently Asked Questions

Is 1 PB equal to 1000 TB or 1024 TB?

Both are correct depending on the system. The International Electrotechnical Commission (IEC) defines 1 PB as exactly 1000 TB (decimal). However, in binary contexts (like RAM or file systems), 1 PB is often used to mean 1024 TB, which is technically 1 PiB. Always check the context.

Why does my hard drive show less space than advertised?

Because manufacturers use decimal (1 TB = 1,000,000,000,000 bytes), while your operating system uses binary (1 TiB = 1,099,511,627,776 bytes). So a 1 TB drive shows as about 931 GiB. This is normal and not a defect.

How many gigabytes are in a petabyte?

In decimal, 1 PB = 1,000,000 GB. In binary, 1 PiB = 1,048,576 GiB. The difference is about 5%, which is why the two systems matter.

Can I use this calculator for cloud storage plans?

Yes, but first check whether your cloud provider uses decimal or binary for billing. Most use decimal, but some report usage in binary. If you’re unsure, look at your provider’s help pages or contact support.

What is the difference between PB and PiB?

PB (petabyte) is decimal: 1015 bytes. PiB (pebibyte) is binary: 250 bytes, which equals 1,125,899,906,842,624 bytes. In binary, 1 PiB = 1024 TiB. The abbreviation “PB” is often misused for PiB in casual writing.

Is there a standard for which system to use?

The IEC standard (since 1998) says PB is decimal and PiB is binary. However, many operating systems and software still use PB to mean binary. The IEEE and most technical bodies recommend using the IEC prefixes (KiB, MiB, GiB, TiB, PiB) to avoid ambiguity, but adoption is slow.

Related

Formula used
in v | Value to convert | - | 1 | 0
sel from | Starting unit | PB=1, TB=0.0009765625
sel sys | System | Binary (1 PB = 1024 TB)=1024, Decimal (1 PB = 1000 TB)=1000
out tb | Terabytes (binary) | TB | v * 1024 * (from == 1 ? 1 : 0.0009765625) | 4
out pb | Petabytes (binary) | PB | v * 0.0009765625 * (from == 1 ? 1 : 1024) | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →