molecalculator

Moles & Molar Mass

Percent Solution Grams per 100 mL Explained

Calculator No. 01-11148 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A percent solution expresses the amount of solute in grams dissolved in 100 milliliters of final solution. For example, a 5% NaCl solution contains 5 grams of NaCl per 100 mL of solution. This page provides a calculator to convert between mass of solute, molar mass, and volume to find molarity, plus a clear explanation of percent solutions.

Formula

The molarity (M) of a solution is calculated as:

Molarity (mol/L) = (Mass of solute in grams) / (Molar mass in g/mol) / (Volume in liters)

Where:

  • Mass of solute (m) – in grams (g)
  • Molar mass (mm) – in grams per mole (g/mol)
  • Volume (v) – in milliliters (mL), converted to liters by dividing by 1000

For a percent solution (w/v), the formula is simpler: Percent (w/v) = (grams of solute / 100 mL of solution) × 100%. This is not the same as molarity, but both are used in labs.

Worked Example

Using the default values from the calculator: you have 2.922 g of NaCl (molar mass = 58.44 g/mol) and you want a final volume of 250 mL.

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles of solute: 2.922 g ÷ 58.44 g/mol = 0.05000 mol (exactly 0.05 mol)
  3. Calculate molarity: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L
  4. Convert to millimolar: 0.2000 mol/L × 1000 = 200.0 mM

The calculator shows 0.2000 mol/L as the molarity and 200.0 mM as millimolar.

Assumptions

  • The solute is completely dissolved and does not react with the solvent.
  • The final volume is measured after mixing, not the volume of solvent added.
  • The solution is at room temperature (density changes are ignored).
  • The molar mass is for the pure, anhydrous solute (e.g., NaCl, not NaCl·H₂O).

Background: Why Percent Solutions Matter

Percent solutions are a common way to describe concentration in biology, chemistry, and medicine. The notation “% w/v” means weight per volume, i.e., grams per 100 mL. This is different from “% v/v” (volume per volume, used for liquids) and “% w/w” (weight per weight, used for solids). For example, a 0.9% saline solution is 0.9 g of NaCl per 100 mL of water – a standard intravenous fluid. Understanding this helps in preparing buffers, media, and reagents.

How to Choose Between Percent and Molarity

Percent solutions are quick and easy for making rough solutions, but molarity is essential for stoichiometry and reactions. If you need to know how many moles of a substance are present, use molarity. If you just need a specific mass per volume, percent works. For example, a 10% sucrose solution is fine for a general purpose, but for a reaction requiring 0.1 mol of glucose, you need molarity.

Common Mistakes and Misconceptions

  • Mixing up w/v and w/w: A 10% w/w solution is 10 g solute per 100 g total, which is not the same as 10 g per 100 mL.
  • Using solvent volume instead of final volume: When you dissolve a solid, the final volume is larger than the solvent volume. Always measure final volume.
  • Forgetting to convert mL to L: Molarity requires liters; dividing by 1000 is a common slip.
  • Assuming 1 mL = 1 g for all solutions: This is true for water at 4°C, but not for concentrated solutions or other solvents.

How to Prepare a Percent Solution

To make a given percent solution (w/v):

  1. Weigh the required grams of solute (e.g., 5 g for a 5% solution).
  2. Dissolve in less than the final volume of solvent (e.g., 80 mL of water).
  3. Stir until fully dissolved.
  4. Add solvent to bring the total volume to 100 mL (or your target).
  5. Mix well.

This ensures the final volume is correct, not the solvent volume.

Comparing Percent, Molarity, and Molality

Percent (w/v) is grams per 100 mL, molarity is moles per liter, and molality is moles per kilogram of solvent. For dilute aqueous solutions, molarity and molality are numerically close, but they diverge with concentration. Percent is independent of temperature (if using mass), while molarity changes with temperature because volume expands. Choose based on your application: percent for quick prep, molarity for reactions, molality for colligative properties.

Costs and Practical Considerations

Percent solutions are inexpensive to prepare if you have a balance and volumetric flask. Molarity requires knowing the molar mass accurately. For costly reagents, preparing a stock solution (e.g., 10% w/v) and diluting is more economical than weighing small amounts each time. Always label with both percent and molarity if needed.

Safety and Handling

When preparing any solution, follow your lab method, the safety data sheet (SDS) and your supervisor. Wear appropriate PPE (gloves, goggles, lab coat). Some solutes are hazardous – never taste or inhale. For acids and bases, add solute to water slowly to avoid splashing. Dispose of waste properly.

Frequently Asked Questions

What does 5% w/v mean? It means 5 grams of solute dissolved in enough solvent to make 100 mL of final solution.

How do I convert percent to molarity? First calculate grams per liter (multiply percent by 10, e.g., 5% = 50 g/L), then divide by molar mass: M = (g/L) / (g/mol).

Is percent solution the same as parts per million (ppm)? No. Percent is parts per hundred, ppm is parts per million. 1% = 10,000 ppm.

Can I use the calculator for any solute? Yes, as long as you enter the correct molar mass. For ionic compounds, use the formula mass (e.g., NaCl = 58.44 g/mol).

Why does the calculator ask for molar mass if I just want percent? The calculator computes molarity, which requires molar mass. For percent, you don’t need molar mass – just mass and volume.

What if my solute is a liquid? For v/v percent, use volume of solute per 100 mL. For w/v, you’d need density to convert volume to mass.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →