Table salt (sodium chloride, NaCl) dissolved in pure water has a pH of 7.0, which is perfectly neutral. This is because NaCl is a salt of a strong acid (HCl) and a strong base (NaOH), so it does not react with water to change the concentration of hydrogen ions. The pH of a table salt solution is therefore determined almost entirely by the water itself, not the salt.
Formula
The pH of a solution is defined as the negative base-10 logarithm of the hydrogen ion activity: pH = −log10[H+]. In pure water at 25 °C, [H+] = 1.0 × 10−7 mol/L, giving pH = 7.00. Adding sodium chloride does not shift this equilibrium because neither Na+ nor Cl− hydrolyzes (reacts with water) to any measurable extent.
For the molarity calculation shown above: Molarity (mol/L) = (mass in grams ÷ 58.44 g/mol) ÷ volume in liters. The value 58.44 g/mol is the molar mass of NaCl (22.99 for Na + 35.45 for Cl). The pH output is fixed at 7.0 because the salt itself contributes no H+ or OH−; the expression includes the concentration only to make the calculator functional and to show that concentration does not affect the pH.
Worked Example
Using the defaults: dissolve 5.844 g of table salt in 1.0 L of water.
- Moles of NaCl = 5.844 g ÷ 58.44 g/mol = 0.1000 mol
- Molarity = 0.1000 mol ÷ 1.0 L = 0.1000 mol/L
- Since NaCl is neutral, [H+] remains 1.0 × 10−7 mol/L
- pH = −log10(1.0 × 10−7) = 7.00
The calculator returns a molarity of 0.1000 mol/L and a pH of 7.00.
Assumptions
- Pure sodium chloride, not iodized salt with additives that may alter pH slightly
- Pure water with no dissolved CO2 or other acids/bases
- Temperature at 25 °C (pH of pure water shifts with temperature)
- Complete dissociation of NaCl into Na+ and Cl− ions
- Dilute solution where ion activity approximates concentration
Why Table Salt Is Neutral
The pH of a salt solution depends on the strength of the acid and base from which the salt formed. Sodium chloride comes from hydrochloric acid (a strong acid that fully dissociates) and sodium hydroxide (a strong base that fully dissociates). When NaCl dissolves, the Na+ ion does not attract OH− from water strongly enough to release H+, and Cl− does not attract H+ from water to release OH−. The water remains neutral.
Contrast this with salts of weak acids or bases. Sodium bicarbonate (baking soda) is a salt of a weak acid (carbonic acid) and a strong base, so its solution is slightly basic (pH around 8.3). Ammonium chloride is a salt of a strong acid and weak base, giving a slightly acidic solution (pH around 5.0). Table salt sits exactly in the middle because both parent compounds are strong.
Real-World pH of Salt Water
In practice, a solution of table salt and tap water rarely reads exactly 7.0 on a pH meter. Tap water contains dissolved minerals and dissolved carbon dioxide from the air, which forms carbonic acid and lowers the pH to roughly 5.5–6.5. Seawater, which is about 3.5% salt, has a pH around 8.1 because of dissolved carbonate and bicarbonate ions from the ocean’s buffering system—not because of the sodium chloride itself.
If you add pure NaCl to distilled water that has been boiled to remove CO2, the pH stays at 7.0. If you add it to ordinary distilled water exposed to air, the pH may read slightly below 7 due to carbonic acid, and this is unrelated to the salt. This is why the pH of salt water is often reported as “approximately neutral” rather than exactly 7.
Measuring pH of Salt Solutions
To measure the pH of a salt solution accurately, use a calibrated pH meter rather than litmus paper, which gives only a coarse range. The meter reading is the real check because temperature and ionic strength shift pH. At higher salt concentrations, the activity of H+ changes slightly, which can cause a pH meter to read a few hundredths of a unit away from 7 even in a pure NaCl solution. This is an artifact of the electrode’s response to ionic strength, not a true acidity change.
For a 0.1 mol/L NaCl solution (about 5.8 g per liter), the measured pH is typically 6.8–7.2 depending on the electrode and dissolved gases. Salt concentrations used in cooking (about 1–2% by mass) are far too dilute to meaningfully alter pH. Only in highly concentrated brines (near saturation, about 26% at room temperature) do ionic effects become noticeable, and even then the shift is less than 0.1 pH units.
Common Misconceptions
A frequent misconception is that “salt” in chemistry refers to any ionic compound, and that all salts are neutral. This is false. Many salts are acidic or basic. For example, ferric chloride (used in water treatment) produces an acidic solution with pH around 2–3 because the Fe3+ ion hydrolyzes. Sodium carbonate (washing soda) produces a basic solution with pH around 11. Only salts formed from a strong acid and a strong base—like NaCl, KBr, or NaNO3—are neutral.
Another misconception is that adding salt to water makes it more alkaline, which is sometimes claimed in health contexts. This is not supported by chemistry. The pH of salt water is governed by the water and any dissolved gases or minerals, not by the sodium chloride. If someone measures a higher pH after adding salt, it is because the salt displaced dissolved CO2 or because the water source already contained alkaline minerals.
Frequently Asked Questions
Does table salt change the pH of water? No. Pure sodium chloride does not react with water to produce H+ or OH− ions, so it leaves the pH unchanged at 7.0 in pure water. Any pH change you observe is due to other substances in the water, such as dissolved carbon dioxide or minerals.
Is salt water acidic or basic? Salt water made from table salt and pure water is neutral (pH 7.0). Seawater is slightly basic (pH ~8.1) because of dissolved carbonate and bicarbonate ions from the ocean’s natural buffering system, not because of sodium chloride.
Why does my salt water test at pH 6.5 with litmus paper? Litmus paper is imprecise and often reads slightly acidic in the presence of dissolved CO2. Tap water or distilled water exposed to air absorbs carbon dioxide, forming carbonic acid. Boil the water first and test immediately with a calibrated meter to see pH 7.0.
Is iodized salt different from regular salt in pH? Iodized salt contains tiny amounts of potassium iodide (or sodium iodide) and often anti-caking agents. These additives are present in such small quantities (typically less than 0.01%) that they do not measurably change the pH of a solution. Both iodized and non-iodized table salt give neutral solutions.
Can I use salt to raise or lower the pH of my pool? No. Sodium chloride is pH-neutral and will not adjust pool pH. Pool pH is managed with specific acids (like muriatic acid) or bases (like sodium carbonate). Saltwater pools still require separate pH adjustment even though they contain dissolved NaCl.
What is the pH of a saturated salt solution? A saturated solution of NaCl (about 360 g per liter at 25 °C) still has a pH near 7.0 in pure water. The high ionic strength can cause a pH meter to read slightly off (6.8–7.2), but this is an electrode effect, not true acidity. The solution remains chemically neutral.
Practical Relevance
Knowing that table salt is pH-neutral matters in food preservation, where salt concentration affects microbial growth but not acidity. It also matters in cooking: brining meat does not change the pH of the meat significantly, so it does not affect how acidic or alkaline the final dish tastes. In laboratory settings, NaCl is often used to adjust ionic strength without altering pH, making it a standard component of buffer solutions. Always follow your lab method, the safety data sheet (SDS) and your supervisor when preparing solutions for experiments.
Related
Formula used
in m | Mass of salt | g | 5.844 | 0 in v | Water volume | L | 1.0 | 0.001 out conc | Molarity | mol/L | (m / 58.44) / v | 4 out ph | Theoretical pH | - | 7.0 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check