The molar mass of the phosphate ion (PO43−) is 94.97 g/mol (rounded to two decimal places). This is the mass of one mole of phosphate ions, calculated from the atomic weights of phosphorus (30.974 g/mol) and oxygen (15.999 g/mol).
Formula
The molar mass of any ion or molecule is the sum of the atomic masses of its constituent atoms, in grams per mole (g/mol). For the phosphate ion:
M(PO43−) = M(P) + 4 × M(O)
- M(P) = 30.974 g/mol (phosphorus)
- M(O) = 15.999 g/mol (oxygen)
Plugging in: 30.974 + 4 × 15.999 = 30.974 + 63.996 = 94.970 g/mol.
The calculator above uses the same formula to convert between mass of a phosphate salt (or any solute) and molarity. Enter the mass, the molar mass of your specific compound (for pure phosphate ion, use 94.97; for salts, use the salt’s molar mass, e.g., Na3PO4 = 163.94 g/mol), and the final volume. The first output is the molarity in mol/L.
Worked Example
Suppose you dissolve 2.922 g of anhydrous sodium phosphate (Na3PO4, molar mass 163.94 g/mol) in water to make 250 mL of solution. What is the molarity?
- Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L.
- Calculate moles of Na3PO4: 2.922 g / 163.94 g/mol = 0.01782 mol.
- Divide by volume: 0.01782 mol / 0.250 L = 0.07129 mol/L.
The calculator gives 0.0713 mol/L (rounded to 4 decimals), matching the manual calculation. The millimolar output is 71.29 mM.
Assumptions
- The solute is pure and anhydrous (no water of hydration).
- The final volume is measured after dissolution, not the volume of solvent added.
- The solution is dilute enough that molarity ≈ molality (no significant volume change).
- For ionic compounds, the molar mass is for the formula unit (e.g., Na3PO4), not just the phosphate ion.
Background: What Is Phosphate?
Phosphate (PO43−) is a polyatomic ion consisting of one phosphorus atom covalently bonded to four oxygen atoms, with a −3 charge. It is the conjugate base of phosphoric acid (H3PO4). In nature, phosphate is essential for life—it forms the backbone of DNA and RNA, stores energy in ATP, and is a key component of bones and teeth (as calcium phosphate). In the lab, phosphate buffers are widely used to maintain pH in biological and chemical experiments.
Phosphate appears in many common salts: trisodium phosphate (Na3PO4), disodium hydrogen phosphate (Na2HPO4), and monopotassium phosphate (KH2PO4). Each has a different molar mass because of the additional atoms and the degree of protonation.
How to Calculate Molar Mass of Phosphate Salts
When working with phosphate compounds, you often need the molar mass of the whole salt, not just the ion. The general method:
- Write the chemical formula (e.g., K2HPO4).
- Find the atomic weights of each element (IUPAC standard values).
- Multiply each atomic weight by the number of atoms of that element in the formula.
- Sum all contributions.
Example: K2HPO4 (dipotassium hydrogen phosphate):
- K: 2 × 39.098 = 78.196
- H: 1 × 1.008 = 1.008
- P: 1 × 30.974 = 30.974
- O: 4 × 15.999 = 63.996
- Total = 174.174 g/mol
For hydrated salts, add the mass of water molecules (e.g., Na2HPO4·7H2O includes 7 × 18.015 = 126.105 g/mol).
Common Mistakes and Misconceptions
- Confusing phosphate with phosphite (PO33−): Phosphite has three oxygens, molar mass 78.97 g/mol, not 94.97.
- Forgetting the charge: The molar mass is the same for the ion and the neutral atom group; the electron mass is negligible (about 0.0005 g/mol per electron), so the −3 charge does not change the mass meaningfully.
- Using the salt’s mass for the ion’s molar mass: If you weigh out Na3PO4, you must use 163.94 g/mol, not 94.97, to calculate moles of the salt.
- Rounding too early: In multi-step calculations, round only at the end to avoid errors.
Practical Uses and Applications
Knowing the molar mass of phosphate is essential for preparing buffer solutions, culture media, and fertilizers. For example, to make 1 L of 0.1 M phosphate buffer at pH 7.4, you might mix Na2HPO4 and NaH2PO4 in specific ratios. The molar masses allow you to weigh the correct amounts. In molecular biology, phosphate is part of the buffer in DNA electrophoresis (TAE or TBE buffers contain phosphate or acetate). In environmental chemistry, phosphate concentration in water is measured to assess pollution, and molar mass converts mass to moles for stoichiometric calculations.
Safety and Handling
Phosphate salts are generally low in toxicity, but they can irritate eyes and skin. Always follow your lab method, the safety data sheet (SDS) and your supervisor when handling any chemical. Avoid inhaling dust. When preparing solutions, add acid or base carefully to avoid splashes. For buffer solutions, the pH meter reading is the real check—temperature and ionic strength can shift pH, so calibrate and measure at the working temperature.
Frequently Asked Questions
What is the molar mass of phosphate in kg/mol?
94.97 g/mol is equal to 0.09497 kg/mol. In scientific contexts, g/mol is standard, but you can convert by dividing by 1000.
Does the molar mass of phosphate change with pH?
No. The molar mass is a fixed property of the ion. However, at different pH values, phosphate exists in different protonated forms (H2PO4⁻, HPO4²⁻, PO4³⁻). Each form has a different molar mass because it contains different numbers of hydrogen atoms. For example, H2PO4⁻ has a molar mass of 96.99 g/mol.
How do I calculate the molar mass of a hydrated phosphate salt?
Add the molar mass of the anhydrous salt to the molar mass of water (18.015 g/mol) multiplied by the number of water molecules in the formula. For example, Na3PO4·12H2O has molar mass 163.94 + 12×18.015 = 380.12 g/mol.
Why is the molar mass of phosphate not exactly 95 g/mol?
Because atomic weights are not whole numbers. Phosphorus has an atomic weight of 30.974 and oxygen 15.999, so the sum is 94.970 g/mol. The slight deviation from 95 is due to the isotopic composition of the elements.
Can I use the same calculator for other ions?
Yes, the calculator works for any solute. Just enter the correct molar mass for the compound you are using. For example, for sulfate (SO4²⁻) use 96.06 g/mol.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 94.97 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %