molecalculator

Moles & Molar Mass

PM Calculator Simplex Method: A Clear Guide

Calculator No. 01-3235 · Updated · Formula and assumptions shown below

New other-row entry -9.0000
Row factor
3.0000
= Other-row pivot-column entry ÷ Pivot value
Pivot value
2
Set in the form below
Pivot-row entry
4
Set in the form below
You enter
Pivot value, Pivot-row entry, Other-row pivot-column entry, Other-row entry in the same column as a
You get
New other-row entry, Row factor
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A “PM calculator simplex method” usually means a calculator for solving a linear-programming problem with the simplex method, but “PM” is ambiguous and is not a standard name for one universal calculator. This page provides a small calculator for one simplex pivot: enter the pivot-row value and tableau entries to calculate the new row; it does not automatically solve an entire optimization problem.

Formula

The calculator applies the elementary row operation used to eliminate an entry from a simplex tableau. The updated entry is c′ = c − b(a / p). Here, p is the pivot value, a is the pivot-row entry in the column being updated, b is the other row’s entry in the pivot column, and c is that other row’s entry in the column being updated. The row factor is f = b / p, which shows the multiple of the pivot row being subtracted.

Tableau entries are numbers representing coefficients, right-hand-side values, or other quantities in the linear program; they have no universal physical unit. The pivot value must be nonzero. This calculator reports one updated entry, not a complete tableau or an optimal solution.

Worked Example

Using the defaults, p = 2, a = 4, b = 6, and c = 3. First calculate the row factor:

f = b / p = 6 / 2 = 3.

Then update the other-row entry:

c′ = c − b(a / p) = 3 − 6(4 / 2) = 3 − 12 = −9.

The calculator’s first result is therefore −9, and the row factor is 3. The sign matters: subtracting three times the pivot row changes the original entry from 3 to −9.

Assumptions

  • The pivot value is nonzero; a zero pivot makes this calculation undefined.
  • The entries come from a consistently arranged simplex tableau, with the chosen pivot row and column identified correctly.
  • This is a numerical row update only. It does not select a pivot, test feasibility, or determine whether a solution is optimal.

What the Simplex Method Does

The simplex method is an algorithm for linear programming: optimizing a linear objective subject to linear constraints. In its standard form, a problem might ask for the largest value of an objective such as 3x + 2y, subject to resource limits and nonnegative decision variables. The constraints define a feasible region, and, when a finite optimum exists, at least one optimum occurs at a corner point of that region.

Rather than checking every point, simplex moves from one eligible corner to another. A tableau records the objective and constraints in a form that makes each move an algebraic pivot. A pivot exchanges a variable currently in the basis for one entering it. The row operation calculated above helps make the entering variable’s column zero in the other constraint rows, while making its coefficient one in the pivot row after that row is divided by the pivot.

There are multiple simplex variants and tableau conventions. Their signs and choices of entering or leaving variables can differ, so the pivot calculation alone cannot tell you which rule to use. Follow the convention and stopping rules for the particular formulation or solver being used.

How to Use a Simplex Pivot Calculator

  1. Choose a tableau and identify the pivot row and pivot column according to the method’s selection rules.
  2. Read p from their intersection. Check that p is not zero.
  3. For a target entry in another row, read b from that row’s pivot-column position, a from the pivot row’s target-column position, and c from the target row’s target-column position.
  4. Enter those four values. The first result is the updated target entry; the row factor tells you how many pivot rows are subtracted.
  5. Repeat the row update for each other entry in the affected row, and perform the normalization and remaining row updates required by the tableau convention.

For the pivot row itself, the usual normalization is to divide each entry by p. The calculator above does not perform that step, so use its result as one part of a tableau pivot, not as a complete pivot operation.

Common Problems and Limits

  • Wrong entry assignment: b must come from the row being changed and the pivot column. Swapping b with a generally gives the wrong update.
  • Sign errors: the standard elimination step subtracts (b / p) times the pivot row. Some written tableau conventions express the same operation with different signs because their tableau is arranged differently.
  • Zero or tiny pivot: a zero pivot is invalid. A very small pivot can amplify rounding error; pivot-selection rules and numerical techniques help manage this issue.
  • Rounding too early: retain adequate precision during successive pivots and round only when presenting the final result. Rounded tableau values can affect later calculations.
  • Assuming one pivot proves optimality: a pivot updates the tableau but does not establish that the linear program is feasible, bounded, or optimal.

For hand calculations, this formula is useful for checking a single row entry. For larger problems, a spreadsheet or a linear-programming solver can update the whole tableau and apply pivot-selection rules. Solver outputs still need interpretation: modeling errors, infeasibility, unboundedness, and numerical tolerances are separate from the arithmetic of a row operation.

Frequently Asked Questions

What does PM mean in “PM calculator simplex method”?
There is no single standard meaning of “PM” in this phrase. It may be shorthand used by a particular course, website, or search query. The simplex method itself is a linear-programming algorithm; check the source using “PM” for its intended meaning.

Can this calculator solve a complete linear-programming problem?
No. It computes one updated entry and its row factor for a specified pivot. Solving the full problem requires selecting pivots, updating a tableau, and applying feasibility and optimality checks.

What happens if the pivot value is zero?
The formula divides by the pivot value, so a zero pivot cannot be used. Choose a valid pivot according to the method’s rules; do not substitute zero into the calculation.

Why does my answer differ from another simplex calculator?
Check whether both tools use the same tableau layout, sign convention, pivot row, pivot column, and rounding precision. Different pivot choices can produce different intermediate tableaus even when they represent the same optimization problem.

Is the simplex method the same as a calculator’s “simplex” setting?
Not necessarily. “Simplex” can refer to different features in software or technical fields. In this context it means the simplex algorithm for linear programming, unless the calculator documentation defines the term differently.

Related

Formula used
in pv | Pivot value | - | 2 | -
in a | Pivot-row entry | - | 4 | -
in b | Other-row pivot-column entry | - | 6 | -
in c | Other-row entry in the same column as a | - | 3 | -
out x | New other-row entry | - | c - b * a / pv | 4
out f | Row factor | - | b / pv | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →