molecalculator

Moles & Molar Mass

Polyatomic Atoms List: Common Examples and Meaning

Calculator No. 01-5278 · Updated · Formula and assumptions shown below

Total atoms in formula 5 atoms
Molar mass
18.039 g/mol
Result, rounded to 3 decimal places
Number of nitrogen atoms
1
Set in the form below
Number of hydrogen atoms
4
Set in the form below
You enter
Number of nitrogen atoms, Number of hydrogen atoms, Number of oxygen atoms, Number of sulfur atoms, Number of phosphorus atoms, Ion charge magnitude
You get
Total atoms in formula (atoms), Molar mass (g/mol)
Rounding
0 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

There is no single standard list of “polyatomic atoms,” because the phrase is usually an informal way to refer to polyatomic ions: charged groups of two or more atoms that act as a unit in many reactions. Common examples include ammonium (NH4+), hydroxide (OH−), nitrate (NO3−), sulfate (SO42−), and phosphate (PO43−); a calculator can help find each formula’s molar mass from its atomic composition.

Formula

This calculator totals the atoms specified in a formula and sums their standard atomic weights to estimate molar mass:

Total atoms = n + h + o + s + p

Molar mass = (14.007 × n) + (1.008 × h) + (15.999 × o) + (32.06 × s) + (30.974 × p)

  • n, h, o, s, p are the counts of nitrogen, hydrogen, oxygen, sulfur, and phosphorus atoms in the formula; each count is dimensionless.
  • Atomic weights are in g/mol: nitrogen 14.007, hydrogen 1.008, oxygen 15.999, sulfur 32.06, and phosphorus 30.974.
  • Ion charge magnitude is selected separately. Charge does not materially change the molar-mass calculation at the precision shown; this selector is a reminder that ion charge is not an atom count.

For elements not included in the inputs, calculate their contribution separately or extend the atom-count calculation using the appropriate abridged standard atomic weight. This simple tool is intended for common introductory examples, not every possible polyatomic ion.

Worked Example

For the default inputs, the formula is NH4+: n = 1, h = 4, o = 0, s = 0, and p = 0. The selected charge magnitude is 1.

Total atoms = 1 + 4 + 0 + 0 + 0 = 9 atoms.

Molar mass = (14.007 × 1) + (1.008 × 4) + (15.999 × 0) + (32.06 × 0) + (30.974 × 0)
= 14.007 + 4.032
= 18.039 g/mol.

The result is the formula mass per mole of ammonium ions, expressed as molar mass. The calculator does not infer a formula from an ion’s name: enter the atom counts from a verified formula.

Assumptions

  • The entered counts are nonnegative whole-number atom counts, even though the calculator accepts numeric input.
  • The formula’s elements are limited to nitrogen, hydrogen, oxygen, sulfur, and phosphorus.
  • Atomic weights use the listed abridged standard values; real isotopic composition can cause small differences.
  • The molar mass is calculated from the neutral atoms’ standard atomic weights; electron mass and ionic charge are negligible at the displayed precision.

What “Polyatomic Atom” Usually Means

An atom is one particle of a chemical element, such as a sodium atom (Na) or an oxygen atom (O). “Polyatomic” means “made of several atoms,” so a group containing several bonded atoms is not technically one atom. In basic chemistry questions, “polyatomic atom” commonly means a polyatomic ion: a group of atoms with an overall electrical charge that behaves as a unit in many chemical formulas.

For example, nitrate is NO3−. It contains one nitrogen atom and three oxygen atoms, bonded together, and the group has a net charge of −1. The subscript 3 applies only to oxygen; the superscript − indicates the charge of the entire ion. Neither number is an instruction to multiply the other.

Common Polyatomic Ions List

These familiar ions appear often in introductory chemistry. Their charges are part of their identities, so include them when writing formulas and balancing ionic compounds.

  • Ammonium: NH4+
  • Hydroxide: OH−
  • Nitrate: NO3−
  • Nitrite: NO2−
  • Acetate: C2H3O2−, also written CH3COO−
  • Hydrogen carbonate (bicarbonate): HCO3−
  • Carbonate: CO32−
  • Sulfate: SO42−
  • Sulfite: SO32−
  • Phosphate: PO43−
  • Hydrogen phosphate: HPO42−
  • Dihydrogen phosphate: H2PO4−
  • Permanganate: MnO4−
  • Chromate: CrO42−
  • Dichromate: Cr2O72−

This is a useful study list, not an exhaustive catalog. Many other polyatomic ions exist, and some formulas are most familiar in particular courses or chemical contexts. Check a reliable reference when precision matters, especially for less common ions.

How to Read Formulas and Charges

A chemical formula gives the number of each kind of atom in a group. A missing subscript means one atom: in OH−, there is one oxygen and one hydrogen. Parentheses show that a group is repeated when followed by a subscript. Thus, Ca(NO3)2 contains two nitrate ions, for a total of two nitrogen atoms and six oxygen atoms.

The charge is the net charge of the complete ion, not the charge on each atom. In a neutral ionic compound, the positive and negative charges balance. For instance, calcium has charge 2+ and nitrate has charge 1−, so two nitrate ions are needed for each calcium ion: Ca(NO3)2. The compound is neutral overall, even though its component ions are charged.

Patterns and Common Mix-Ups

Some related ions differ by one oxygen atom while retaining the same charge. Nitrate NO3− and nitrite NO2− are a common pair; sulfate SO42− and sulfite SO32− are another. The suffixes can help with memorization, but they are not a substitute for learning the exact formulas and charges.

  • Do not confuse an ion with an element. Sulfate contains sulfur and oxygen; it is not a sulfur atom.
  • Do not drop the charge. CO3 without its charge is incomplete when you mean the carbonate ion.
  • Do not treat a subscript as a charge. In SO42−, 4 counts oxygen atoms; 2− is the ion’s net charge.
  • Do not change an ion’s subscripts to balance a compound. Use the required number of whole ions, usually shown with parentheses and an outside subscript.

A related distinction is that some molecules have several atoms but no net charge. Water (H2O) and carbon dioxide (CO2) are polyatomic molecules, but they are not polyatomic ions. “Polyatomic” describes the number of atoms; “ion” describes net electrical charge.

Frequently Asked Questions

What are five examples of polyatomic ions?
Ammonium (NH4+), hydroxide (OH−), nitrate (NO3−), sulfate (SO42−), and phosphate (PO43−) are five common examples.

Is a polyatomic ion an atom?
No. It is a charged group of two or more bonded atoms that can behave as a unit in reactions. Calling one a “polyatomic atom” is informal and technically inaccurate.

Is water a polyatomic ion?
No. Water is a polyatomic molecule with formula H2O, but it is neutral overall. It is polyatomic, not an ion.

How do I know the charge of a polyatomic ion?
The charge is written as a superscript in its formula and should be learned or checked in a chemistry reference. It usually cannot be determined from the atom counts alone.

How do I find the molar mass of a polyatomic ion?
Multiply each element’s atomic weight by its subscript, then add the contributions. For sulfate, add one sulfur atomic weight to four oxygen atomic weights. The ion’s charge has a negligible effect on ordinary molar-mass calculations.

Related

Formula used
in n | Number of nitrogen atoms | - | 1 | 0
in h | Number of hydrogen atoms | - | 4 | 0
in o | Number of oxygen atoms | - | 0 | 0
in s | Number of sulfur atoms | - | 0 | 0
in p | Number of phosphorus atoms | - | 0 | 0
sel charge | Ion charge magnitude | 0=0, 1=1, 2=2, 3=3
out atoms | Total atoms in formula | atoms | n + h + o + s + p | 0
out mw | Molar mass | g/mol | n * 14.007 + h * 1.008 + o * 15.999 + s * 32.06 + p * 30.974 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →