This calculator finds the hydrostatic pressure difference caused by a vertical height difference in a fluid: enter the fluid density, height, and gravitational acceleration to get the pressure difference. It uses ΔP = ρgh, with the result in pascals (Pa); the sign depends on which point is higher.
Formula
The hydrostatic pressure difference between two points in a stationary fluid of constant density is:
ΔP = ρgh
- ΔP is the pressure difference magnitude, in pascals (Pa).
- ρ (rho) is fluid density, in kilograms per cubic metre (kg/m³).
- g is gravitational acceleration, in metres per second squared (m/s²).
- h is vertical separation, in metres (m).
The calculator reports the magnitude. For a fluid at rest, pressure increases with depth: if the lower point is a vertical distance h below the upper point, then Plower − Pupper = ρgh. If you define the difference in the opposite order, the signed result is negative. The height is vertical, not distance along a sloping pipe.
Worked Example
Using the calculator’s default inputs—h = 1 m, ρ = 1000 kg/m³, and g = 9.80665 m/s²:
- Write the relation: ΔP = ρgh.
- Substitute the values: ΔP = (1000 kg/m³)(9.80665 m/s²)(1 m).
- Multiply: ΔP = 9806.65 kg/(m·s²) = 9806.65 Pa.
- Convert pascals to kilopascals: 9806.65 Pa ÷ 1000 = 9.80665 kPa.
Rounded to the calculator’s displayed precision, the pressure difference is 9806.65 Pa, or 9.8067 kPa. This is the pressure increase from the top of a one-metre column of fluid with density 1000 kg/m³ to its bottom under standard gravity.
Assumptions
- The fluid is stationary and has uniform density throughout the height.
- Gravity is constant over the vertical interval.
- The result is a pressure difference, not absolute pressure; no atmospheric pressure is added.
- The calculator returns a nonnegative magnitude. Assign the sign from the order of the two points.
How Height, Density, and Gravity Affect Pressure
The formula follows from the weight of fluid above a point. A column with cross-sectional area A and height h has volume Ah and mass ρAh. Its weight is ρAhg. Dividing that force by the area gives pressure, ρgh. This explains why area cancels: for a given fluid and vertical depth, the ideal hydrostatic pressure difference does not depend on the container’s width or shape.
Each factor changes the result in direct proportion. Double the vertical depth and the pressure difference doubles. Double the density, as when comparing a denser liquid with a less dense one at the same height, and the difference doubles. A larger gravitational acceleration also produces a larger pressure gradient. Near Earth’s surface, g is often approximated as 9.81 m/s²; the calculator default, 9.80665 m/s², is the conventional standard value. Actual local gravity varies slightly with location and altitude.
When This Relation Applies
Use ΔP = ρgh for pressure changes due to elevation in a fluid at rest, or where a static head approximation is appropriate. Typical applications include comparing pressure at different depths in a tank, estimating the pressure from a liquid column, and relating the vertical separation of pressure taps to a static pressure difference.
For a liquid whose density changes appreciably with height, the more general relation is ΔP = ∫ρ(z)g dz over the vertical interval, with the sign set by the coordinate direction. For gases over short height differences, constant density can be a useful approximation; over large altitude changes, gas density is not constant and a compressible-fluid model may be needed.
This relation does not calculate pressure losses from fluid flowing through a pipe. Flow introduces effects such as friction, speed changes, and restrictions. Nor does it by itself give the total or absolute pressure. If the upper point is open to the atmosphere, for example, the lower point’s absolute pressure is atmospheric pressure plus the hydrostatic increase; its gauge pressure relative to the atmosphere is approximately ρgh.
Units and Common Mistakes
Keep the inputs in the units shown. The product (kg/m³)(m/s²)(m) reduces to kg/(m·s²), which is a pascal. The calculator expects height in metres and density in kg/m³. Convert centimetres to metres by dividing by 100; convert millimetres by dividing by 1000. A density in g/cm³ must be multiplied by 1000 to express it in kg/m³. For example, water’s approximate density near room temperature is about 1000 kg/m³, or 1 g/cm³.
- Using path length instead of vertical height: only the vertical separation contributes to static head.
- Confusing pressure and force: pressure is force per area. The result is Pa, not newtons.
- Mixing absolute and gauge pressure: ρgh gives a difference; add a reference pressure only when the problem requires it.
- Using a single density for a changing fluid: this can mislead when temperature, composition, or compression changes density substantially.
- Reversing point order: pressure is greater at the lower point, but a reversed subtraction changes the sign.
Frequently Asked Questions
How do you calculate pressure difference from height, density, and g?
Multiply density by gravitational acceleration and vertical height: ΔP = ρgh. With SI inputs, the answer is in pascals.
Does pressure increase with depth?
Yes. In a stationary fluid of constant density, pressure increases by ρg for each metre of additional depth. The increase over a depth h is ρgh.
What is the pressure difference for one metre of water?
Using ρ = 1000 kg/m³ and g = 9.80665 m/s² gives 9806.65 Pa, or about 9.81 kPa. Water density varies with temperature, so this is an approximation.
Does container shape affect hydrostatic pressure?
No, not at a given depth in the same stationary fluid under the same gravity. The vertical height and fluid density matter; container shape does not appear in the relation.
Is ρgh gauge pressure or absolute pressure?
It is a pressure difference. It equals gauge pressure only when the reference pressure is the pressure at the fluid surface, such as atmospheric pressure in an open tank. Absolute pressure requires adding the reference pressure.
Limits and Practical Use
Use the formula as a static-fluid calculation, not as a substitute for a full flow or compressible-gas analysis. Be clear about the two locations being compared, use the vertical separation, and choose a density that matches the fluid and conditions. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.
Related
Formula used
in h | Vertical height difference | m | 1 | 0 in rho | Fluid density | kg/m^3 | 1000 | 0 in g | Gravitational acceleration | m/s^2 | 9.80665 | 0 out dp | Pressure difference magnitude | Pa | rho * g * h | 2 out kpa | Pressure difference magnitude | kPa | dp / 1000 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Heat Output Calculator kW: Estimate Thermal Power1.395 kW
- Heat Gain and Loss Calculator for Calorimetry4,184.00 J
- Heat Calculation: Formula, Example, and Limits41,840 J
- Heat Energy Released Formula and Worked Example23,012 J
- Heat Transfer Equation for q: Formula and Examples41,840 J
- Heat Rate Formula: Calculate Energy per Unit Time166.67 W