molecalculator

Moles & Molar Mass

Progress Payment Calculator: How It Works

Calculator No. 01-12056 · Updated · Formula and assumptions shown below

Payment due this stage $20,000.00
Remaining contract balance
$80,000.00
From the formula below, to the cent
Total contract amount
$100,000
Set in the form below
Stage percentage
20 %
Set in the form below
You enter
Total contract amount ($), Stage percentage (%), Amount already paid ($)
You get
Payment due this stage ($), Remaining contract balance ($)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A progress payment calculator works out the amount a contractor or supplier is paid at each stage of a project, based on the contract value and the percentage of work completed. You enter the total contract amount, the payment schedule percentages, and the amounts already paid, and it returns the current payment due. This tool is used in construction, engineering, and other long-term projects where work is billed in phases rather than all at once.

Formula

The core formula for a progress payment is:

Payment due = (Total contract amount × Stage percentage / 100) − Amount already paid

Where:

  • Total contract amount (m) – the full agreed price of the project, in dollars.
  • Stage percentage (p) – the percentage of the contract value that becomes payable at this milestone, as a number from 0 to 100.
  • Amount already paid (a) – the cumulative payments made to the contractor before this stage, in dollars.

The result is the amount due at the current stage. The remaining balance is simply the total contract amount minus the sum of all payments made so far (including this one).

Worked Example

Let’s use the default values: a contract of $100,000, a stage percentage of 20%, and no previous payments.

  1. Convert the percentage to a decimal: 20% = 0.20.
  2. Calculate the stage value: $100,000 × 0.20 = $20,000.
  3. Subtract the amount already paid: $20,000 − $0 = $20,000.
  4. Payment due this stage = $20,000.00.
  5. Remaining balance after this payment: $100,000 − $20,000 = $80,000.00.

If the contractor had already received $5,000 in an advance, the payment due would be $20,000 − $5,000 = $15,000, and the remaining balance would be $100,000 − ($5,000 + $15,000) = $80,000.

Assumptions

  • The stage percentage is applied to the original contract amount, not to the remaining balance.
  • All payments are made in the same currency and no interest or late fees are included.
  • The “amount already paid” includes all previous progress payments, advances, and any other sums paid to the contractor under the contract.
  • No retention (a percentage withheld until project completion) is considered. If retention applies, it must be subtracted from each stage payment separately.

How Progress Payments Work in Practice

Progress payments are common in construction, shipbuilding, software development, and any project that spans months or years. Instead of paying the full price upfront, the client pays in installments tied to milestones—such as completing the foundation, framing, or final inspection. This reduces the contractor’s need for working capital and gives the client some leverage to ensure work is completed.

A typical schedule might look like:

  • 10% at contract signing (mobilization)
  • 30% after foundation completion
  • 30% after framing
  • 20% after interior work
  • 10% at final completion

The percentages are negotiated and written into the contract. They often reflect the actual cost incurred at each stage, not just an arbitrary split.

How to Choose the Right Payment Schedule

When setting up a progress payment schedule, consider these factors:

  • Cash flow needs – contractors often prefer larger early payments to buy materials and pay workers.
  • Risk allocation – clients may want to hold back a larger portion until the end to ensure completion.
  • Milestone clarity – each stage should be objectively measurable (e.g., “walls erected” rather than “some work done”).
  • Retention – many contracts withhold 5–10% of each payment until final acceptance, to cover defects.
  • Legal requirements – some jurisdictions have rules on maximum retainage or timing of payments.

Use the calculator to test different scenarios: change the stage percentage and see how the due amount and remaining balance shift. This helps you negotiate a schedule that balances both parties’ interests.

Common Mistakes and Misconceptions

One frequent error is applying the percentage to the remaining balance instead of the original contract amount. For example, on a $100,000 contract, a 20% stage after $20,000 has been paid would be $20,000 (20% of $100,000), not $16,000 (20% of $80,000). Always read the contract to see which base is used.

Another mistake is forgetting to subtract advance payments or previous payments. The “amount already paid” field must include every dollar the contractor has received under the contract, not just the last payment.

Retention is also commonly misunderstood. If a contract says “10% retention is withheld from each progress payment,” then the actual cash paid is 90% of the calculated stage amount, and the retained 10% is held until final completion. This calculator does not automatically deduct retention, so you must adjust the stage percentage or subtract the retention manually.

Finally, don’t confuse progress payments with draw schedules on a construction loan. A draw schedule is set by the lender and may include inspections and lien waivers, which are not part of the simple arithmetic here.

Costs and Fees Associated with Progress Payments

Progress payments themselves are not fees, but they can affect project costs in indirect ways. Contractors may charge a small premium for progress billing to cover the administrative overhead of invoicing and tracking. Clients may incur financing costs if they borrow to make payments. Conversely, progress payments can reduce the contractor’s need for expensive short-term loans, which might lower the overall bid.

Late payments can trigger interest charges or stop-work clauses. Some contracts specify a “pay-when-paid” provision, meaning the contractor only pays subcontractors after receiving payment from the client. These terms are separate from the calculation of the payment amount.

Alternatives to Progress Payments

Not all projects use progress payments. Common alternatives include:

  • Lump-sum payment – the full amount is paid at the end, which is simple but risky for the contractor.
  • Time-and-materials – the client pays for actual labor hours and materials, plus a markup, often billed monthly.
  • Milestone-based with retainage – a variation that holds back a percentage until final acceptance.
  • Cost-plus – the client pays the contractor’s actual costs plus a fixed fee or percentage.

Each method has trade-offs. Progress payments are a middle ground, providing regular cash flow while tying payment to measurable progress.

Frequently Asked Questions

What is a typical progress payment schedule? A common schedule for a construction project is 10% mobilization, 30% after foundation, 30% after framing, 20% after interior, and 10% at completion. However, schedules vary widely by industry and project size. Always negotiate a schedule that reflects actual cost timing.

How do I calculate the amount of a progress payment if retention is withheld? First calculate the gross stage amount (contract × stage percentage). Then subtract the retention percentage from that gross amount. For example, on a $100,000 contract with a 20% stage and 10% retention, the gross is $20,000, the retention is $2,000, and the net payment is $18,000. The retained $2,000 is paid at final completion if the work is accepted.

Can I use this calculator for a project with multiple stages? Yes, run it once for each stage. Enter the stage percentage for that particular milestone and the cumulative amount already paid (including all previous payments). The calculator gives the payment for that stage. For a full schedule, you would repeat the calculation for each line in your contract.

What if the stage percentage is based on work completed, not the contract amount? If the payment is based on the percentage of work physically completed (e.g., 50% of the building is done), then the stage percentage should equal that completion percentage, and the formula still works. However, if the contract specifies a fixed dollar amount for a milestone, you can simply enter that amount as the “total contract amount” and set the percentage to 100%, or adjust the inputs accordingly.

Does this calculator include taxes or interest? No. The formula only handles the base contract amount and percentage. Taxes, interest, late fees, and other charges must be added separately. If your contract includes a finance charge for late payment, that amount is not part of the progress payment calculation.

Why does the remaining balance sometimes show a negative number? A negative remaining balance means the total payments (including the current stage) exceed the contract amount. This can happen if you enter a stage percentage that is too high or an amount already paid that is larger than the contract. Check your inputs—the contract amount should be the total, and the sum of all stage percentages should not exceed 100%.

Related

Formula used
in m | Total contract amount | $ | 100000 | 0
in p | Stage percentage | % | 20 | 0 | 100
in a | Amount already paid | $ | 0 | 0
out d | Payment due this stage | $ | m * p / 100 - a | 2
out r | Remaining contract balance | $ | m - (a + (m * p / 100)) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →