Calculate a circle’s radius from its arc length by dividing the arc length by the angle in radians: r = s / θ. Enter the arc length and the central angle; the calculator returns the radius in the same length unit as the arc. The angle must be greater than zero and should describe the arc you measured.
Formula
The radius equals arc length divided by central angle in radians:
r = s / θ
- r is the circle’s radius, measured in the same unit as the arc length.
- s is the arc length, measured along the curved part of the circle.
- θ is the central angle subtended by that arc, in radians.
The calculator also gives the diameter, d = 2r. The angle is dimensionless in the mathematical formula, but radians are essential: arc length is defined by s = rθ when θ is in radians. If you have an angle in degrees, convert it using θ in radians = θ in degrees × π / 180. For example, 90° is π/2 radians, or about 1.570796 radians.
Worked Example
Using the calculator’s default values, the arc length is 10 m and the central angle is 1.5707963267948966 rad. Divide the arc length by the angle:
r = 10 m / 1.5707963267948966 = 6.3662 m
The corresponding diameter is:
d = 2 × 6.366197723675814 = 12.7324 m
Thus, the calculator reports a radius of 6.3662 m and a diameter of 12.7324 m, to four decimal places.
Assumptions
- The arc belongs to a circle with a constant radius.
- The entered angle is the central angle for the specific arc, expressed in radians.
- Arc length and radius use the same length unit; the calculator does not convert units.
- The arc length is positive and the central angle is greater than zero.
How the Calculation Works
A radian measures an angle by comparing the length of its arc with the radius. One radian is the central angle that cuts off an arc whose length equals the radius. For any other central angle, the arc length scales in direct proportion: double the angle, and the arc on the same circle doubles. Rearranging that relationship, s = rθ, gives r = s/θ.
This is why the calculator needs both measurements. Arc length alone cannot identify a unique radius: a short arc might be part of a small circle with a wide angle or a large circle with a narrow angle. The angle supplies the missing information.
The formula works for minor arcs and major arcs alike, as long as the angle matches the arc. A semicircle has a central angle of π radians, and a complete circumference corresponds to 2π radians. For a full circle, using its circumference C gives r = C/(2π).
Entering Angles and Units Correctly
The most common source of error is entering degrees as though they were radians. The calculator’s angle field is explicitly in radians. For instance, putting 90 into that field means 90 radians, not 90 degrees; 90 radians describes many turns around the circle. For a quarter-circle, enter π/2, approximately 1.570796, or convert the angle before calculating.
Keep length units consistent. If an arc is 25 cm, the resulting radius is in centimetres. You can convert the answer afterward: 1 m = 100 cm, and 1 in = 2.54 cm. Mixing, for example, an arc length in centimetres with a desired result in metres requires converting one length first. The ratio itself does not perform a unit conversion.
- Measure the curved arc, not the straight line joining its endpoints.
- Use the angle at the circle’s centre, not an angle at a point on its circumference.
- Check that the angle covers the same portion of the circle as the measured arc.
- Avoid rounding the angle too early, especially for small angles.
Common Questions and Limitations
An arc’s chord is its straight-line endpoint-to-endpoint distance, not its arc length. Substituting a chord for s generally produces the wrong radius. Likewise, an inscribed angle (with its vertex on the circle) is not the central angle: for the same intercepted arc, the central angle is twice the inscribed angle. Convert or identify the angle appropriately before applying the arc-length formula.
Very small angles can make the calculation sensitive to measurement error. Since the radius is inversely proportional to θ, a small underestimate of the angle gives an overestimate of the radius. If both measurements are approximate, report a sensible number of significant figures rather than treating the calculator’s displayed digits as measurement certainty.
The equation describes an ideal circular arc. If the curve is not circular, its local curvature can vary, so one radius may not describe the whole path. A circle-fitting method or a measurement at a specified point may be needed instead. The formula also assumes the given angle is in radians; it does not infer the angle unit from the number.
Frequently Asked Questions
How do you find radius from arc length and angle?
Divide the arc length by the central angle in radians: r = s/θ. The answer has the same length unit as the arc.
Can I use degrees in the radius formula?
Not directly in r = s/θ. Convert degrees to radians first by multiplying by π/180. For example, 60° equals π/3 radians.
How do I find radius from arc length without an angle?
You cannot determine a unique radius from arc length alone. You need additional information, such as the central angle, the chord length, or the circle’s circumference.
Is arc length the same as chord length?
No. Arc length follows the curved boundary; chord length is the straight distance between the arc’s endpoints. They are close for a very small arc but are not generally interchangeable.
What is the radius if the arc is a complete circle?
For circumference C, use r = C/(2π). A full circle corresponds to an angle of 2π radians.
Related
Formula used
in s | Arc length | m | 10 | 0 in a | Central angle | rad | 1.5707963267948966 | 0 out r | Radius | m | s / a | 4 out d | Diameter | m | 2 * r | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp