molecalculator

Moles & Molar Mass

Radius From Center: Formula and Circle Calculator

Calculator No. 01-2808 · Updated · Formula and assumptions shown below

Radius 5.0000 units
Center x-coordinate
0 units
Set in the form below
Center y-coordinate
0 units
Set in the form below
Point x-coordinate
3 units
Set in the form below
Point y-coordinate
4 units
Set in the form below
You enter
Center x-coordinate (units), Center y-coordinate (units), Point x-coordinate (units), Point y-coordinate (units)
You get
Radius (units)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Radius is the distance from the center of a circle or sphere to its surface. Enter the center coordinates and a point on the circle to calculate that distance; the calculator returns the radius in the same units as the coordinates.

Formula

The radius is the straight-line distance between the circle’s center and any point on its circumference. In Cartesian coordinates, the formula is:

r = √[(x₂ − x₁)² + (y₂ − y₁)²]

  • r is the radius, in the same length unit used for the coordinates.
  • (x₁, y₁) are the center’s horizontal and vertical coordinates.
  • (x₂, y₂) are the coordinates of a point on the circumference.

The equation is the Pythagorean theorem applied to the horizontal and vertical differences. It works when the circle is in a two-dimensional coordinate plane, and the point supplied really lies on its circumference. If the center is already at (0, 0), the formula reduces to r = √(x² + y²).

Worked Example

Using the calculator’s default values, the center is (0, 0) and a point on the circle is (3, 4). The coordinate units are unspecified, so the result is in those same units.

r = √[(3 − 0)² + (4 − 0)²]

r = √(9 + 16) = √25 = 5 units

The calculator displays the radius to four decimal places, so this exact result appears as 5.0000 units. The familiar 3–4–5 right triangle makes this a convenient check of the distance formula.

Assumptions

  • The inputs are coordinates in a flat, two-dimensional Cartesian plane.
  • All four coordinates use the same length unit and the same coordinate reference system.
  • The selected point is on the circle’s circumference; no measurement uncertainty is included.
  • The radius is a nonnegative straight-line distance, not an arc length or a signed direction.

What Radius Means

A circle is the set of points in a plane that are all the same distance from one fixed point, its center. That common distance is the radius. A sphere uses the same idea in three dimensions: every point on its surface is one radius away from its center.

Radius describes size, while the center describes position. Moving a circle across a coordinate plane changes its center coordinates but does not change its radius. Likewise, a circle can have many different points on its circumference, but measuring from the same center to any exact circumference point gives the same radius.

The word can also refer to a line segment from center to circumference. In geometry and equations, however, “radius” usually means the segment’s length. It is not a diameter: the diameter passes through the center from one side of the circle to the other, and its length is twice the radius.

How to Use the Coordinates

Enter the center’s x- and y-coordinates, then enter the coordinates of a point on the circumference. Coordinates may be negative; a negative coordinate simply places a point to the left of or below the origin. Do not enter a negative radius. The distance formula squares the coordinate differences, so the final distance is zero or positive.

For example, a circle centered at (2, 1) with a circumference point at (5, 5) has differences of 3 and 4. Its radius is √(3² + 4²), or 5 coordinate units. If coordinates are in centimeters, the radius is 5 cm; if they are in meters, it is 5 m.

Use consistent units throughout. If the center is measured in centimeters but the point is measured in meters, convert one pair of coordinates before calculating. Also ensure that both points use the same origin and axes. Coordinates measured from different reference points cannot be combined directly.

From Radius to Other Circle Measurements

Once the radius is known, it can be used to calculate common properties of a circle. These formulas assume an ideal circle and use the radius in the appropriate units:

  • Diameter: d = 2r. The diameter is the longest straight line across the circle and goes through its center.
  • Circumference: C = 2πr. This is the distance around the circle.
  • Area: A = πr². If r is measured in centimeters, the area is in square centimeters.
  • Sphere surface area: S = 4πr², when the object is a sphere.
  • Sphere volume: V = (4/3)πr³, when the object is a sphere.

Units change with the quantity: a radius is a length, circumference is a length, area is a squared length, and volume is a cubed length. For instance, using a radius in meters gives area in m² and sphere volume in m³. Do not report an area or volume in the same unit as the radius.

Common Measurement Problems

Real measurements rarely land exactly on a mathematical circle. A point picked from a photograph, map, or physical object may be slightly inside or outside the true edge. The calculated radius is then the distance to that measured point, not necessarily the object’s exact radius. Report a sensible number of significant figures rather than implying precision that the measurements do not support.

A related source of confusion is the diameter. If a problem gives a diameter of 10 cm, the radius is 5 cm—not 10 cm. If it gives the center and a point on the boundary, the distance between those two points is already the radius; do not divide that result by two.

For a three-dimensional point, a sphere’s radius can be found by extending the distance formula: r = √[(x₂ − x₁)² + (y₂ − y₁)² + (z₂ − z₁)²]. This calculator is two-dimensional, so it does not include a z-coordinate. For points on a curved surface such as Earth, ordinary flat-plane coordinate distance may also be inappropriate; a curved-surface or geodesic calculation is needed.

Frequently Asked Questions

How do you find the radius from the center?
Measure the straight-line distance from the center to a point on the circumference. With coordinates, subtract the center coordinates from the point coordinates, square the differences, add them, and take the square root.

Is the radius half the diameter?
Yes. The diameter crosses the center and spans the full width of the circle, so r = d/2 and d = 2r.

Can a radius be negative?
No. A radius is a distance and is therefore nonnegative. Coordinates or coordinate differences can be negative, but the distance formula produces a nonnegative result.

What is the radius if the center is at the origin?
For center (0, 0) and a point (x, y) on the circle, r = √(x² + y²). For example, the point (3, 4) gives a radius of 5 units.

Do the coordinates have to be in meters?
No. Any length unit works, provided all coordinates use the same unit. The calculated radius uses that same unit.

Related

Formula used
in x1 | Center x-coordinate | units | 0 | -
in y1 | Center y-coordinate | units | 0 | -
in x2 | Point x-coordinate | units | 3 | -
in y2 | Point y-coordinate | units | 4 | -
out r | Radius | units | sqrt((x2 - x1)^2 + (y2 - y1)^2) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →