The rate of a reaction tells you how quickly reactants are converted into products (usually in mol/L per second), while the extent of reaction describes how far the conversion proceeds before it stops—often at equilibrium. You can calculate both from concentration data, stoichiometry, and the equilibrium constant, and this page provides a tool to compute reaction rates and extents from simple inputs.
Formula
For a first-order reaction A → products, the concentration of A at time t is given by:
[A]t = [A]0 × e−kt
- [A]0 = initial concentration of reactant (mol/L)
- k = rate constant (s−1 for first-order)
- t = time elapsed (s)
- e = Euler’s number (≈ 2.71828)
The rate of reaction at time t is rate = k × [A]t (mol/(L·s)). The extent of reaction is the amount of reactant consumed: extent = [A]0 − [A]t (mol/L).
Worked Example
Using the default values: [A]0 = 1.00 mol/L, k = 0.050 s−1, t = 60 s.
- Calculate the exponent: −k × t = −0.050 × 60 = −3.00
- Compute e−3.00 ≈ 0.0497871
- Concentration remaining: [A]t = 1.00 × 0.0497871 = 0.0497871 mol/L ≈ 0.050 mol/L
- Rate at t = 60 s: rate = 0.050 × 0.0497871 = 0.00248936 mol/(L·s) ≈ 0.0025 mol/(L·s)
- Extent: 1.00 − 0.0497871 = 0.950213 mol/L ≈ 0.950 mol/L
These match the calculator outputs (0.050 mol/L, 0.0025 mol/(L·s), 0.950 mol/L).
Assumptions
- The reaction is first-order in reactant A.
- The reaction is irreversible or the reverse reaction is negligible.
- Temperature and rate constant remain constant over time.
- The system is homogeneous (e.g., a well-mixed solution).
Background: What Do Rate and Extent Mean?
In chemistry, the rate of a reaction is a measure of how fast the concentration of a reactant or product changes per unit time. It is usually expressed in mol/(L·s) for solutions. The extent of a reaction is a measure of how far the reaction has proceeded—how much reactant has been consumed or product formed. For a simple irreversible reaction, the extent increases until the limiting reactant is exhausted. For a reversible reaction, the extent stops at equilibrium, where the forward and reverse rates are equal.
These two concepts are linked: the rate determines how quickly the extent changes. A fast reaction reaches a given extent quickly, while a slow reaction takes longer. However, the maximum possible extent is determined by thermodynamics (the equilibrium constant), not by the rate.
How to Measure Reaction Rate
To measure a reaction rate experimentally, you typically monitor the concentration of a reactant or product over time. Methods include:
- Spectrophotometry (measuring absorbance at a wavelength where a species absorbs)
- Conductivity measurements (if ions are involved)
- Gas pressure changes (for reactions producing or consuming gases)
- Sampling and titration at intervals
The instantaneous rate is the slope of the concentration–time curve at a specific time. The initial rate is measured near t = 0, which is often used to determine the rate law.
Determining the Rate Law and Order
The rate law expresses the rate as a function of concentrations: rate = k[A]m[B]n. The exponents m and n are the orders with respect to each reactant, determined experimentally—not from the balanced equation. For a first-order reaction (m = 1), the half-life is constant: t1/2 = ln(2)/k. For a second-order reaction, the half-life depends on the initial concentration.
Common methods to find the order:
- Initial rates method: vary one concentration while holding others constant, observe how the initial rate changes.
- Integrated rate laws: plot concentration vs. time (zero-order), ln[A] vs. time (first-order), or 1/[A] vs. time (second-order) to see which gives a straight line.
Equilibrium and Extent of Reaction
For reversible reactions, the extent is limited by the equilibrium constant K. For a reaction aA + bB ⇌ cC + dD, the equilibrium constant is:
K = ([C]c[D]d) / ([A]a[B]b)
A large K (>>1) means products are favored; the reaction goes nearly to completion. A small K (<<1) means reactants are favored; the extent is small. The reaction quotient Q, calculated at any time, tells you whether the reaction will proceed forward (Q < K) or reverse (Q > K) to reach equilibrium.
For a given initial composition, you can calculate the equilibrium extent by solving the equilibrium expression. This often involves a quadratic equation for simple cases.
Common Mistakes and Pitfalls
- Confusing rate and extent: A reaction can be fast but have a small equilibrium extent (e.g., a weak acid dissociating). Rate and extent are independent.
- Using the wrong order: The rate constant k has different units for different orders (s−1 for first-order, L/(mol·s) for second-order). Using the wrong units leads to errors.
- Ignoring stoichiometry: The rate of disappearance of a reactant may differ from the rate of appearance of a product by a stoichiometric factor.
- Assuming equilibrium is reached: In practice, many reactions are stopped before equilibrium (e.g., by quenching). The extent then depends on time, not just thermodynamics.
- Unit mix-ups: Always convert time to seconds and concentrations to mol/L before using the formulas.
Limitations of the Simple First-Order Model
The calculator above assumes a simple first-order irreversible reaction. Real reactions may be more complex:
- Second-order or higher-order kinetics
- Reversible reactions with forward and reverse rate constants
- Multiple steps with intermediates
- Temperature dependence of k (Arrhenius equation: k = A e−Ea/RT)
- Non-ideal behavior (activity vs. concentration)
For such cases, more advanced models are needed. The first-order model is a good starting point for many simple decomposition and radioactive decay processes.
Frequently Asked Questions
How do I calculate the half-life of a first-order reaction?
For a first-order reaction, the half-life is independent of initial concentration and is given by t1/2 = ln(2) / k. For example, if k = 0.050 s−1, t1/2 = 0.693 / 0.050 = 13.9 s.
What is the difference between reaction rate and rate constant?
The reaction rate is the actual speed of the reaction at a given moment, depending on concentrations and temperature. The rate constant k is a proportionality factor that is constant at a given temperature and depends only on the reaction and catalyst. The rate = k × [A]m[B]n, so the rate changes with concentrations, while k stays the same.
Can the extent of reaction be greater than the initial concentration?
No, for a simple reaction A → products, the extent (amount of A consumed) cannot exceed the initial concentration of A. If there are multiple reactants, the limiting reactant determines the maximum extent. For reversible reactions, the extent is also limited by equilibrium.
How does temperature affect rate and extent?
Increasing temperature generally increases the rate constant k (Arrhenius equation), so the reaction reaches equilibrium faster. The effect on the extent (equilibrium position) depends on whether the reaction is exothermic or endothermic, as described by Le Chatelier’s principle. For an exothermic reaction, higher temperature shifts equilibrium to reactants (smaller extent), while for endothermic, it shifts to products.
What if my reaction is not first-order?
You need to determine the order experimentally and use the appropriate integrated rate law. For second-order, the integrated law is 1/[A] = 1/[A]0 + kt. The calculator here is only for first-order; for other orders, use the corresponding formulas.
Related
Formula used
in f | Initial concentration of reactant | mol/L | 1.00 | 0 in k | Rate constant (k) | 1/s | 0.050 | 0 in t | Time elapsed | s | 60 | 0 out c | Concentration remaining | mol/L | f * exp(-k * t) | 3 out rate | Reaction rate | mol/(L·s) | k * c | 4 out extent | Extent of reaction | mol/L | f - c | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Calculate Extent of Reaction0.800 mol
- Rate and Extent of Chemical Reactions0.1000 mol/(L·s)
- Chemical Reaction Formula: How to Write & Balance2.2722 mol
- Extent of Reaction Solver & How to Use It0.6000 mol
- Extent of Reaction Units: mol and Beyond
- Extent of Reaction Equation & How to Use It0.8000 mol