molecalculator

Moles & Molar Mass

Unit Conversion F to C: How to Convert

Calculator No. 01-10470 · Updated · Formula and assumptions shown below

Temperature in Celsius 37.00 °C
Temperature in Kelvin
310.15 K
= Temperature in Celsius + 273.15
Temperature in Fahrenheit
98.6 °F
Set in the form below
You enter
Temperature in Fahrenheit (°F)
You get
Temperature in Celsius (°C), Temperature in Kelvin (K)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert Fahrenheit (°F) to Celsius (°C), subtract 32 from the Fahrenheit value and then multiply by 5/9. The formula is °C = (°F − 32) × 5/9. This calculator performs that conversion instantly, and the rest of this page explains the formula, gives worked examples, and covers common mistakes.

Formula

The conversion from Fahrenheit to Celsius is a linear equation:

°C = (°F − 32) × 5/9

where:

  • °F = temperature in degrees Fahrenheit
  • °C = temperature in degrees Celsius
  • 5/9 = the ratio of the size of one degree Fahrenheit to one degree Celsius (a Celsius degree is 1.8 times larger)
  • 32 = the freezing point of water in Fahrenheit, which corresponds to 0 °C

The Kelvin scale is then obtained by adding 273.15 to the Celsius value: K = °C + 273.15. This is the absolute temperature scale used in science.

Worked Example

Using the default value of 98.6 °F (normal human body temperature):

  1. Subtract 32: 98.6 − 32 = 66.6
  2. Multiply by 5/9: 66.6 × 5/9 = 37.0

So 98.6 °F = 37.0 °C. The calculator rounds to two decimal places, giving 37.00 °C. Adding 273.15 gives 310.15 K, which is the standard body temperature in kelvin.

Assumptions

  • The conversion uses the exact relationship between the Fahrenheit and Celsius scales, which is defined by the freezing and boiling points of water at 1 atm (32 °F = 0 °C, 212 °F = 100 °C).
  • The Kelvin value assumes the Celsius temperature is measured with respect to absolute zero, which is −273.15 °C.
  • No other assumptions are needed; this is a pure unit conversion, not a physical measurement.

Why the Formula Works

The Fahrenheit and Celsius scales are both linear, but they have different zero points and different degree sizes. On the Celsius scale, water freezes at 0 °C and boils at 100 °C, a span of 100 degrees. On the Fahrenheit scale, the same span is 180 degrees (32 °F to 212 °F). Therefore, one Celsius degree is 180/100 = 9/5 = 1.8 times larger than one Fahrenheit degree. To convert, you first shift the zero point (subtract 32) and then scale the degree size (multiply by 5/9).

How to Choose the Right Formula

You only need two formulas for everyday temperature conversion:

  • Fahrenheit to Celsius: °C = (°F − 32) × 5/9
  • Celsius to Fahrenheit: °F = (°C × 9/5) + 32

If you have a Celsius value and need Fahrenheit, use the second formula. A quick mental shortcut: double the Celsius value, subtract 10%, and add 32. For example, 20 °C → 40 − 4 + 32 = 68 °F (exact value is 68 °F). This works well for typical weather temperatures.

Common Mistakes and Misconceptions

One of the most common errors is forgetting to subtract 32 before multiplying. For instance, converting 100 °F by simply multiplying by 5/9 gives 55.6 °C, but the correct answer is 37.8 °C. Another mistake is using the wrong factor: some people multiply by 9/5 instead of 5/9. Always remember that Fahrenheit degrees are smaller, so a Fahrenheit number is always larger than the Celsius number for the same temperature (above −40 °).

A frequent misconception is that 0 °F is the coldest possible temperature. In fact, 0 °F is about −17.8 °C, and absolute zero is −459.67 °F (−273.15 °C). Another misconception is that the two scales meet at −40; this is true: −40 °F = −40 °C. That fact can be used as a quick check.

Practical Applications

Temperature conversion appears in many everyday and scientific contexts:

  • Cooking: Oven temperatures in recipes may be given in Fahrenheit (e.g., 350 °F = 175 °C).
  • Weather: International weather reports often use Celsius; converting helps travelers understand forecasts.
  • Medicine: Body temperature is measured in both scales; 98.6 °F = 37.0 °C is the normal value.
  • Science: Chemistry and physics experiments use Celsius or Kelvin, while some US instruments read Fahrenheit.
  • HVAC: Thermostats in the US use Fahrenheit, but many technical specifications use Celsius.

In laboratory work, always follow your lab method and the safety data sheet (SDS) for any temperature-sensitive procedures.

Comparison with Other Scales

Besides Fahrenheit and Celsius, the Kelvin scale is the SI base unit of temperature. It is an absolute scale where 0 K is absolute zero, the point at which molecular motion theoretically stops. Kelvin degrees are the same size as Celsius degrees, so a change of 1 K equals a change of 1 °C. The Rankine scale is the absolute Fahrenheit scale, used mainly in some engineering fields; 0 °R = 0 K, and degrees are the same size as Fahrenheit degrees.

For everyday use, Celsius is the standard in most of the world, while Fahrenheit remains common in the United States. The scientific community uses Kelvin for thermodynamic calculations because it avoids negative temperatures and simplifies gas law equations.

Frequently Asked Questions

How do I convert Fahrenheit to Celsius without a calculator?

Subtract 32 from the Fahrenheit value, then multiply by 5 and divide by 9. For a rough estimate, subtract 30 and then divide by 2. For example, 70 °F → (70 − 30) / 2 = 20 °C, while the exact value is 21.1 °C. This shortcut is accurate to within a few degrees for typical weather temperatures.

What is the formula to convert Celsius to Fahrenheit?

Multiply the Celsius temperature by 9/5 and then add 32. For example, 25 °C → 25 × 9/5 + 32 = 45 + 32 = 77 °F. This is the inverse of the Fahrenheit-to-Celsius formula.

At what temperature are Fahrenheit and Celsius the same?

They are equal at −40 degrees. So −40 °F = −40 °C. This is the only temperature where both scales read the same number, a useful check for conversions.

Why does the US still use Fahrenheit?

The US adopted the Fahrenheit scale early in its history, and changing to Celsius would require a massive update to weather reports, road signs, and everyday usage. While most countries use Celsius, the US continues with Fahrenheit for daily life, though science and medicine in the US often use Celsius or Kelvin.

Is 100 °F a high fever?

100 °F is 37.8 °C. Normal body temperature is around 98.6 °F (37 °C), so 100 °F is slightly above normal and may indicate a low-grade fever. However, fever thresholds can vary by age and individual; consult a healthcare provider for medical advice.

How do I convert Fahrenheit to Kelvin directly?

First convert to Celsius using (°F − 32) × 5/9, then add 273.15. For example, 68 °F → (68 − 32) × 5/9 = 20 °C, then 20 + 273.15 = 293.15 K. This is the standard two-step method.

Related

Formula used
in f | Temperature in Fahrenheit | °F | 98.6 | -459.67 | 10000
out c | Temperature in Celsius | °C | (f - 32) * 5 / 9 | 2
out k | Temperature in Kelvin | K | c + 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →