The rate of a forward reaction is given by the differential rate law: rate = k[A]m[B]n, where k is the rate constant and m, n are the reaction orders (not necessarily the stoichiometric coefficients). This formula tells you how fast reactants are converted to products at a given instant, based on their concentrations and the temperature-dependent constant k.
Formula
The general form of the rate law for a forward reaction aA + bB → products is:
rate = k [A]m [B]n
- rate – the instantaneous rate of disappearance of a reactant or appearance of a product, in mol/(L·s).
- k – the rate constant, which depends on temperature and the presence of a catalyst. Its units vary with the overall order (m + n).
- [A], [B] – molar concentrations (mol/L) of reactants.
- m, n – the reaction orders with respect to A and B. These are determined experimentally, not from the balanced equation (except for elementary steps).
For an elementary reaction (a single step), m equals the stoichiometric coefficient of A, and n equals that of B. For a multi-step mechanism, the orders come from the slowest step (rate-determining step).
Worked Example
Using the default values from the calculator: [A] = 0.50 mol/L, [B] = 0.25 mol/L, k = 0.15 (units depend on order), m = 1, n = 1.
Step 1: Write the rate law: rate = k [A]1 [B]1.
Step 2: Substitute the numbers: rate = 0.15 × (0.50)1 × (0.25)1.
Step 3: Multiply: 0.15 × 0.50 = 0.075; then 0.075 × 0.25 = 0.01875.
Step 4: Round to 4 significant figures (as the calculator does): rate = 0.01875 mol/(L·s), displayed as 0.0188.
Assumptions
- The reaction is in a homogeneous phase (usually gas or dilute solution).
- The temperature is constant; k is constant only at a fixed temperature.
- The rate law is a simple power law; some reactions have more complex forms (e.g., with inhibitors).
- The concentrations are instantaneous values, not initial or final.
How to Determine the Reaction Orders
The orders m and n are found experimentally, typically by the method of initial rates. You run the reaction with different initial concentrations and measure the initial rate. For example, if doubling [A] while keeping [B] constant doubles the rate, then m = 1. If doubling [A] quadruples the rate, m = 2. If changing [A] has no effect, m = 0.
For a reversible reaction, the net rate is the difference between the forward and reverse rates. At equilibrium, the forward rate equals the reverse rate, so the net rate is zero. The forward rate formula alone describes only the forward direction.
Common Mistakes and Misconceptions
- Using stoichiometric coefficients as orders: Only for elementary steps. For most reactions, orders must be measured.
- Ignoring units of k: The units of k depend on the overall order. For a first-order reaction, k has units s⁻¹; for second-order, L/(mol·s). Always check that the rate comes out in mol/(L·s).
- Confusing rate with rate constant: The rate changes with concentration; k does not (at fixed temperature).
- Forgetting that concentration changes over time: The rate law gives the instantaneous rate; as reactants are consumed, the rate decreases.
Temperature Dependence and the Arrhenius Equation
The rate constant k is not a universal constant; it increases with temperature. The Arrhenius equation describes this:
k = A e−Ea/(RT)
where A is the pre-exponential factor (same units as k), Ea is the activation energy (J/mol), R is the gas constant (8.314 J/(mol·K)), and T is the absolute temperature (K). A rule of thumb is that the rate roughly doubles for every 10 °C rise, but this is only an approximation and varies with Ea.
When to Use the Forward Rate Formula
This formula is used in chemical kinetics to predict how fast a reaction proceeds under given conditions. It is essential for:
- Designing industrial reactors (e.g., determining residence time).
- Studying reaction mechanisms by comparing predicted and observed rates.
- Calculating half-life (for first-order reactions, t1/2 = ln2/k).
- Understanding how concentration changes affect reaction speed in biological systems (enzyme kinetics uses a similar concept).
For a reversible reaction, the forward rate formula is used together with the reverse rate to find the equilibrium constant: K = kforward/kreverse.
Frequently Asked Questions
What is the difference between rate law and integrated rate law?
The rate law (differential form) gives the rate as a function of concentration at a specific moment. The integrated rate law gives concentration as a function of time, obtained by integrating the differential law. For example, for a first-order reaction, the integrated law is ln[A]t = −kt + ln[A]0.
How do I find the rate constant k from experimental data?
You can use the initial rates method: measure the initial rate for several sets of concentrations, determine the orders, then plug one set into the rate law to solve for k. Alternatively, use the integrated rate law and plot the appropriate graph (e.g., ln[A] vs. time for first-order) and find the slope.
Why is the rate of forward reaction equal to the reverse at equilibrium?
At equilibrium, the concentrations of reactants and products remain constant because the forward and reverse reactions occur at the same rate. This is a dynamic equilibrium: both reactions continue, but their rates are equal, so there is no net change.
Can the forward rate be negative?
No, the forward rate is always positive (or zero if no reactants are present). It represents the speed of conversion of reactants to products. A negative rate would imply reactants are being formed, which is the reverse reaction.
Does the formula work for gases?
Yes, for gases you can use partial pressures instead of concentrations. The rate law then becomes rate = k PAm PBn, and the units of k adjust accordingly. The ideal gas law relates pressure to concentration: P = (n/V)RT = CRT.
Always follow your lab method, the safety data sheet (SDS) and your supervisor when performing kinetics experiments.
Related
Formula used
in cA | Concentration of A | mol/L | 0.50 | 0 | 10 in cB | Concentration of B | mol/L | 0.25 | 0 | 10 in k | Rate constant k | (mol/L)^(1-order)/s | 0.15 | 0 | 1000 in m | Order in A | - | 1 | 0 | 3 in n | Order in B | - | 1 | 0 | 3 out rate | Forward reaction rate | mol/(L·s) | k * cA^m * cB^n | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %