molecalculator

Moles & Molar Mass

Relative Formula Mass of Calcium Phosphate

Calculator No. 01-12028 · Updated · Formula and assumptions shown below

Amount of substance 0.1000 mol
Number of formula units
6.022 × 1022
Result, rounded to 3 decimal places
Mass of sample
31.018 g
Set in the form below
Molar mass
310.18 g/mol
Set in the form below
You enter
Mass of sample (g), Molar mass (g/mol)
You get
Amount of substance (mol), Number of formula units
Rounding
4 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The relative formula mass of calcium phosphate, Ca3(PO4)2, is 310.18 g/mol (using standard atomic weights). This value is the sum of the atomic masses of three calcium atoms, two phosphorus atoms, and eight oxygen atoms in one formula unit.

Formula

The relative formula mass (Mr) is calculated by adding the relative atomic masses (Ar) of all atoms in the chemical formula:

Mr(Ca3(PO4)2) = 3×Ar(Ca) + 2×Ar(P) + 8×Ar(O)

  • Ar(Ca) = 40.078 g/mol (calcium)
  • Ar(P) = 30.974 g/mol (phosphorus)
  • Ar(O) = 15.999 g/mol (oxygen)

Plugging in the IUPAC standard atomic weights:

3×40.078 = 120.234
2×30.974 = 61.948
8×15.999 = 127.992
Sum = 120.234 + 61.948 + 127.992 = 310.174 g/mol, usually rounded to 310.18 g/mol.

Worked Example

Using the calculator defaults: a sample mass of 31.018 g of calcium phosphate (exactly 0.1 mol).

  1. Divide mass by molar mass: 31.018 g ÷ 310.18 g/mol = 0.10000 mol.
  2. Multiply by Avogadro’s number: 0.1 mol × 6.02214076×1023 mol−1 = 6.022×1022 formula units.

So 31.018 g of calcium phosphate contains 0.1000 mol (about 6.022×1022 formula units). The calculator shows the same result.

Assumptions

  • Atomic weights are the IUPAC standard values (abridged to 4 significant figures).
  • The compound is pure, anhydrous Ca3(PO4)2 – not the hydrated form or a mixed calcium phosphate.
  • Mass is measured in grams, molar mass in g/mol.

Why “Relative” and Not “Molecular”?

Calcium phosphate is an ionic compound, not a molecule. It exists as a giant lattice of Ca2+ and PO43− ions. The term “relative formula mass” (or “formula weight”) is used for ionic substances because there is no discrete molecule. The formula unit Ca3(PO4)2 represents the simplest whole-number ratio of ions that gives a neutral compound: three Ca2+ ions (total +6 charge) and two PO43− ions (total −6 charge).

Common Mistakes and Misconceptions

  • Forgetting the subscript outside the phosphate group: (PO4)2 means two phosphate groups, so you must multiply P and O by 2. A common error is using 1 P and 4 O instead of 2 P and 8 O.
  • Using the wrong atomic weight: Some older tables list Ca as 40, P as 31, O as 16, giving 310. That is close but not precise. For exact calculations, use 40.078, 30.974, and 15.999.
  • Confusing with other calcium phosphates: There are several: monocalcium phosphate (Ca(H2PO4)2, Mr ≈ 234.05), dicalcium phosphate (CaHPO4, Mr ≈ 136.06), and tricalcium phosphate (Ca3(PO4)2, Mr ≈ 310.18). The name “calcium phosphate” usually means the tricalcium form, but always check the formula.
  • Rounding too early: Round only at the end. If you round each atomic weight to 40, 31, 16, you get 310 instead of 310.18 – a 0.06% error, but it can matter in stoichiometry.

Real-World Relevance

Calcium phosphate is a major component of bones and teeth (as hydroxyapatite, Ca5(PO4)3OH, which is related but not identical). It is also used as a fertilizer, a food additive (anti-caking agent), and in ceramics. Knowing its molar mass is essential for preparing solutions, calculating yields in reactions, and converting between mass and moles in lab work.

For example, if you need 0.5 mol of calcium phosphate for a synthesis, you must weigh out 0.5 × 310.18 = 155.09 g. Conversely, if you have 50 g, you have 50 ÷ 310.18 = 0.1612 mol.

How to Use the Calculator

Enter the mass of your calcium phosphate sample in grams. The calculator divides by the molar mass (310.18 g/mol) to give the amount in moles. It then multiplies by Avogadro’s number to show the number of formula units. You can change the molar mass if you are working with a different calcium phosphate salt – just input the correct value.

The calculator assumes the sample is pure Ca3(PO4)2. If your sample is hydrated or has impurities, the effective molar mass changes, and the result will be off.

Frequently Asked Questions

Is the relative formula mass of calcium phosphate 310 or 310.18?

Both are used. 310 is a rounded approximation (using Ar = 40, 31, 16). The precise value using IUPAC standard atomic weights is 310.18 g/mol. In most school problems, 310 is acceptable; in research or precise stoichiometry, use 310.18.

What is the difference between relative formula mass and molar mass?

Relative formula mass (Mr) is a dimensionless number equal to the sum of relative atomic masses. Molar mass has units of g/mol and has the same numerical value. For example, Mr = 310.18 and molar mass = 310.18 g/mol. They are used interchangeably in calculations.

How do I calculate the percentage of calcium in calcium phosphate?

Mass of calcium in one formula unit = 3 × 40.078 = 120.234 g/mol. Divide by the molar mass of the compound: 120.234 ÷ 310.18 = 0.3876, or 38.76% by mass. Similarly, phosphorus is 2×30.974/310.18 = 19.97%, and oxygen is 127.992/310.18 = 41.27%.

Why is calcium phosphate written as Ca3(PO4)2 and not Ca3P2O8?

Both formulas represent the same ratio of atoms, but the polyatomic phosphate ion (PO43−) is a stable unit that behaves as a single ion in many reactions. Writing it with parentheses shows that there are two phosphate groups, which is clearer for understanding the compound’s structure and reactions.

Does calcium phosphate dissolve in water?

Calcium phosphate is very insoluble in water (solubility product Ksp ≈ 2×10−29 at 25°C). That is why it is used in bone implants and as a phosphate source in fertilizers – it releases phosphate slowly. In lab work, you usually work with it as a solid, not as an aqueous solution.

What is the relative formula mass of calcium phosphate dihydrate?

The dihydrate form is Ca3(PO4)2·2H2O. Add 2 × (2×1.008 + 15.999) = 36.03 g/mol to the anhydrous mass, giving 346.21 g/mol. Always check the formula – many commercial samples are hydrated.

Related

Formula used
in m | Mass of sample | g | 31.018 | 0
in mm | Molar mass | g/mol | 310.18 | 0.001
out n | Amount of substance | mol | m / mm | 4
out nn | Number of formula units | - | n * 6.02214076e23 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →