molecalculator

Moles & Molar Mass

Relative Molecular Mass of Glucose: 180.16

Calculator No. 01-9894 · Updated · Formula and assumptions shown below

Amount of glucose 0.1000 mol
Mass of carbon
7.21 g
= Mass of glucose × (6×12.011)÷Molar mass of glucose
Mass of hydrogen
1.21 g
= Mass of glucose × (12×1.008)÷Molar mass of glucose
Mass of oxygen
9.60 g
= Mass of glucose × (6×15.999)÷Molar mass of glucose
You enter
Mass of glucose (g), Molar mass of glucose (g/mol)
You get
Amount of glucose (mol), Mass of carbon (g), Mass of hydrogen (g), Mass of oxygen (g)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The relative molecular mass of glucose (C6H12O6) is 180.16 (to two decimal places), based on the IUPAC standard atomic weights. This value is the sum of the atomic masses of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms, and it is the number you use to convert between grams and moles of glucose in any calculation.

Formula

The relative molecular mass (Mr) is the weighted average mass of a molecule relative to 1/12 the mass of a carbon-12 atom. It is a dimensionless quantity, but it is numerically equal to the molar mass in grams per mole (g/mol). For glucose:

Mr(C6H12O6) = 6 × Ar(C) + 12 × Ar(H) + 6 × Ar(O)

  • Ar(C) = 12.011 (standard atomic weight of carbon)
  • Ar(H) = 1.008 (standard atomic weight of hydrogen)
  • Ar(O) = 15.999 (standard atomic weight of oxygen)

Plugging in the numbers: 6 × 12.011 = 72.066; 12 × 1.008 = 12.096; 6 × 15.999 = 95.994. Sum = 72.066 + 12.096 + 95.994 = 180.156 g/mol. Rounded to two decimal places, that is 180.16 g/mol.

Worked Example

Using the calculator defaults: you have 18.016 g of glucose (exactly 0.1000 mol). The molar mass is 180.156 g/mol.

  1. Moles of glucose: n = m / M = 18.016 g / 180.156 g/mol = 0.1000 mol (to 4 significant figures).
  2. Mass of carbon in that sample: (6 × 12.011) / 180.156 × 18.016 g = 72.066 / 180.156 × 18.016 = 7.207 g (rounded to 2 decimals).
  3. Mass of hydrogen: (12 × 1.008) / 180.156 × 18.016 = 12.096 / 180.156 × 18.016 = 1.210 g.
  4. Mass of oxygen: (6 × 15.999) / 180.156 × 18.016 = 95.994 / 180.156 × 18.016 = 9.599 g.

The calculator gives the same results: 0.1000 mol, 7.21 g C, 1.21 g H, 9.60 g O. Notice the masses of the elements add up to 18.016 g, as they must.

Assumptions

  • Atomic weights are the IUPAC standard abridged values (H 1.008, C 12.011, O 15.999).
  • The molecule is the most common isotopologue (no heavy isotopes like 13C or 2H).
  • Glucose is in its neutral, non-ionized form. In solution it may exist as a ring or open chain, but the molecular formula is the same.

Why 180.16 Matters in the Lab

The relative molecular mass is the bridge between the mass you weigh on a balance and the number of moles you need for a reaction or solution. For example, to make 1 L of a 1 M glucose solution, you weigh out 180.16 g of glucose and dissolve to a final volume of 1 L. To make 500 mL of 0.5 M, you need 0.25 mol, which is 45.04 g. Without the correct molar mass, every concentration calculation fails.

Glucose is also a common standard for calibrating osmometers and for biochemical assays. In cell culture media, glucose is often present at 5–25 mM; to prepare 1 L of 25 mM glucose, you need 0.025 mol × 180.156 g/mol = 4.504 g. The calculator above can do this for you: enter the mass and it gives moles, or use the molarity calculator elsewhere on this site.

Common Mistakes and Misconceptions

  • Using 180 instead of 180.16: For most lab work, 180.16 is precise enough. Using 180 introduces a 0.09% error, which is usually acceptable but not for high-accuracy analytical work.
  • Confusing relative molecular mass with molar mass: They are numerically identical, but relative molecular mass has no units. Molar mass has units of g/mol. In practice, people use them interchangeably.
  • Forgetting the water of hydration: Glucose is often sold as anhydrous, but if you use glucose monohydrate (C6H12O6·H2O), the molar mass is 198.17 g/mol. Always check the label.
  • Rounding atomic weights too early: If you round each element’s contribution to the nearest gram (e.g., C = 72, H = 12, O = 96), you get 180. That is fine for a quick estimate, but for precise work use the full values.

How to Verify Your Own Calculation

If you are calculating the molar mass of a glucose derivative or a different sugar, follow these steps:

  1. Write the molecular formula (e.g., fructose is also C6H12O6, so it has the same molar mass).
  2. Look up the standard atomic weight for each element (IUPAC provides these).
  3. Multiply each atomic weight by the number of atoms of that element.
  4. Sum all contributions.
  5. Round to the precision you need. For most lab work, two decimal places is sufficient.

You can also use the calculator on this page: enter any mass of glucose, and it will compute the moles and the mass of each element. If you need to go the other way (from moles to mass), simply multiply moles by 180.156 g/mol.

Frequently Asked Questions

Is the relative molecular mass of glucose exactly 180?
No. The exact value depends on the atomic weights used. With IUPAC standard atomic weights, it is 180.156 g/mol, which rounds to 180.16. The number 180 is a common approximation, often used for quick mental math, but it is not exact.

Why do some textbooks say 180.16 and others 180.18?
The difference comes from the atomic weight values used. Older textbooks might use C = 12.01, H = 1.01, O = 16.00, giving 180.18. The IUPAC standard values (12.011, 1.008, 15.999) give 180.156. Both are acceptable, but 180.16 is the most current standard.

Does glucose have the same molar mass as fructose?
Yes. Fructose also has the molecular formula C6H12O6, so its relative molecular mass is also 180.16. The difference between glucose and fructose is in the arrangement of atoms, not the formula.

How many moles are in 1 gram of glucose?
Divide 1 g by 180.156 g/mol, which gives 0.005551 mol, or 5.551 mmol. This is useful when preparing small volumes of solution.

What is the mass of one molecule of glucose?
One molecule of glucose has a mass of 180.156 g/mol divided by Avogadro’s number (6.022 × 1023 mol−1), which equals approximately 2.992 × 10−22 g. That is the absolute mass, while the relative molecular mass is the ratio to 1/12 of a carbon-12 atom.

Can I use the same molar mass for glucose in buffers and cell culture?
Yes, as long as the glucose is anhydrous. If the bottle says “glucose monohydrate,” you must use 198.17 g/mol instead. Always check the label for water content.

Related

Formula used
in m | Mass of glucose | g | 18.016 | 0
in mm | Molar mass of glucose | g/mol | 180.156 | 0.001
out n | Amount of glucose | mol | m / mm | 4
out mass_c | Mass of carbon | g | m * (6*12.011)/mm | 2
out mass_h | Mass of hydrogen | g | m * (12*1.008)/mm | 2
out mass_o | Mass of oxygen | g | m * (6*15.999)/mm | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →