A router radius jig is a guide that helps a router cut a repeatable curve, usually a circle or an arc. It controls the distance between the router bit and a pivot point, letting you make rounded tabletops, curved edges, templates, and other parts more accurately than by steering the router freehand.
What a Router Radius Jig Does
The word “radius” refers to the distance from the center of a circle to its edge. A radius jig uses that distance to set the router’s path: the router travels around a fixed pivot, and the bit traces a circular curve. Depending on the design, the jig may make a complete circle, a partial arc, or a rounded corner.
Jigs range from a simple shop-made strip with a pivot hole and a router mounting point to adjustable commercial-style guides. Some attach to the router’s base; others use a trammel arm, track, or pivot pin. The key feature is not the material or brand but a stable, adjustable connection between the pivot and the router.
A radius jig is different from a roundover bit. A roundover bit rounds the edge of an existing workpiece; a radius jig guides the router to shape the workpiece itself into a curve. The two can be used in sequence, for example, to cut a circular tabletop and then soften its perimeter.
How the Jig Works
One end of the jig pivots around a pin or screw fixed at the intended center of the circle. The router is held at a set distance from that pivot. As the router moves around the pivot, the bit follows a circular path. The distance from the pivot axis to the bit’s cutting edge determines the cut radius.
That last detail matters: measuring to the router’s base, the center of the bit, or a mounting hole may not give the actual radius. The relevant measurement is from the pivot’s center to the cutting edge that forms the workpiece boundary. For a through-cut, the bit’s position and cutting diameter also affect the dimensions of the retained piece and the waste.
For example, if the bit’s cutting edge is set 300 mm from the pivot, it traces a 300 mm radius. The resulting circle would be 600 mm in diameter, measured across opposite edges. A jig set for a 300 mm diameter instead needs a 150 mm radius, subject to how the jig defines its adjustment scale.
Choosing a Jig for the Job
Choose a jig based on the shape, size, router, and material—not simply the largest radius listed in its description. Before buying or making one, check:
- Radius range: Confirm that the jig reaches the radius you need. Check whether its scale measures to the bit center or cutting edge.
- Router compatibility: The mounting pattern and opening must suit the router base and allow the bit to pass through without contact.
- Stiffness: A long, flexible arm can deflect under router pressure, shifting the cut. A rigid arm and secure pivot help keep the radius consistent.
- Pivot method: A pin or screw must hold firmly without pulling out or allowing the workpiece to rotate unexpectedly.
- Cut type and capacity: Check whether it is intended for circles, arcs, or both, and whether it can safely support the router and workpiece size.
- Adjustment and repeatability: Clear markings or a reliable measuring method make it easier to set the same radius again.
A shop-made jig can work well for a one-off or frequently repeated size, but its accuracy depends on careful layout and construction. An adjustable jig is more convenient for varied radii; a fixed jig may be simpler and more rigid for a standard task.
Setting Up and Cutting a Curve
- Mark the center and radius. Locate the pivot point on the workpiece or on a secure jigging surface. Measure the desired radius to the bit’s cutting edge.
- Check the geometry. For a circle, diameter equals twice the radius. If the desired finished diameter is 600 mm, the target radius is 300 mm, before accounting for any intended trimming or edge treatment.
- Secure the work. Clamp the workpiece so it cannot shift, and attach the pivot securely. Make sure clamps will not obstruct the router’s full travel.
- Test the setup. With the router unplugged, move it through the intended path. Confirm that the base, bit, jig, clamps, and cord have clearance throughout the sweep.
- Make controlled cuts. Use suitable bit depth and feed rate for the material and tool. Deep cuts may require several passes rather than one heavy pass; follow the router and bit manufacturers’ instructions.
- Inspect and measure. Check the curve before removing the setup. Small errors in pivot location, radius setting, or jig movement can create a visible mismatch.
For a complete circle cut from a panel, the inner piece and surrounding waste need support as the cut finishes. Plan the cut and clamping so neither part can drop, bind the bit, or spin. A jig’s ability to guide a curve does not by itself make an unsupported or poorly secured cut safe.
Common Errors and Safety
A frequent measurement mistake is confusing radius with diameter. Another is measuring from the pivot to the router base rather than to the actual cutting edge. If the jig’s scale is unclear, verify the setting with a ruler or tape and make a test cut in scrap of similar thickness.
Other problems include a loose pivot, a flexing arm, a router base that is not seated flat, or a workpiece that moves during the cut. These issues can produce an uneven curve, chatter, or a cut that is larger or smaller than intended. Keep the jig and pivot fasteners tight, and do not rely on a small tack or shallow screw engagement in material that may split.
Use eye and hearing protection, control dust, and keep hands clear of the bit. Disconnect power before changing the bit or adjusting the jig. Secure the workpiece and pivot, inspect the bit and jig for damage, and follow the router’s instructions. Do not force the router or use a speed, bit, or cutting depth outside the tool and bit guidance.
Jig, Template, or Freehand Routing?
A radius jig is suited to a curve centered on a fixed point. For an irregular curve, a template may be more appropriate: the router follows a shaped guide, often with a guide bushing or bearing, rather than rotating around one center. A template is also useful when several identical curved parts are needed.
Freehand routing can suit small adjustments or rough shaping, but it is difficult to maintain a precise, consistent radius without a guide. A bandsaw or jigsaw can remove most of the waste before routing, reducing the amount the router must cut. The router can then refine the curve against a jig or template. The best approach depends on the required accuracy, material, and available tools.
Frequently Asked Questions
What is the difference between a router circle jig and a radius jig?
A circle jig is a type of radius jig set up to cut a complete circle. “Radius jig” can also refer to guides used for partial arcs or rounded shapes.
How do I calculate the radius from a circle’s diameter?
Divide the diameter by two. A 400 mm diameter requires a 200 mm radius, measured from the circle’s center to its edge.
Can I make a router radius jig myself?
Yes. A rigid arm with a secure router attachment and a dependable pivot can serve as a jig. Accuracy depends on how precisely the pivot-to-bit distance is set and whether the assembly stays rigid during use.
Does the jig’s radius setting equal the finished circle’s radius?
Only if the setting is measured to the cutting edge that defines the finished boundary. Check the jig’s measurement convention and account for bit position before cutting.
Can one jig cut both inside and outside curves?
Some adjustable jigs can guide different cuts, but the setup, support, and measurement may change. Confirm the jig’s intended use and test the configuration on scrap before cutting the final workpiece.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp