This calculator converts rotational speed from revolutions per minute (RPM) to angular velocity in radians per second (rad/s). Enter the RPM value, and you get the equivalent rad/s, which is the standard SI unit for angular speed used in physics and engineering calculations.
Formula
The conversion from RPM to rad/s is a fixed unit conversion, not a physical law. The formula is:
ω (rad/s) = RPM × 2π / 60
Where:
- ω = angular velocity in radians per second (rad/s)
- RPM = rotational speed in revolutions per minute
- 2π = number of radians in one full revolution (≈ 6.283185307)
- 60 = number of seconds in one minute
This works because one revolution equals 2π radians, and one minute equals 60 seconds. So you multiply RPM by 2π to get radians per minute, then divide by 60 to get radians per second.
Worked Example
Using the default value of 120 RPM:
- Start with the speed: 120 RPM
- Convert revolutions to radians: 120 × 2π = 120 × 6.283185307 = 753.9822369 rad/min
- Convert minutes to seconds: 753.9822369 / 60 = 12.56637061 rad/s
So 120 RPM = 12.5664 rad/s (rounded to 4 decimal places). The calculator shows this as 12.5664 rad/s. The second output gives 2 rev/s (120/60), and the third gives 720 deg/s (120 × 360/60), confirming the relationship: 1 rev = 360° = 2π rad.
Assumptions
- The conversion assumes a rigid body rotating about a fixed axis.
- It applies to instantaneous speed; if RPM varies with time, the result is the instantaneous angular velocity at that moment.
- No friction, torque, or mechanical losses are considered—this is purely a unit conversion.
- The value of π is taken as 3.141592653589793 (double-precision).
Why Convert RPM to rad/s?
RPM is the everyday unit for engine speed, motor ratings, and machine specifications. However, most physics and engineering formulas use radians per second because radians are dimensionless and make calculus work cleanly. For example:
- Power from torque: P = τ × ω (watts = N·m × rad/s). If you have torque in N·m and speed in RPM, you must convert to rad/s first.
- Centripetal acceleration: a = ω²r. Using rad/s gives acceleration directly in m/s².
- Kinetic energy of rotation: KE = ½Iω², where I is moment of inertia in kg·m².
- Frequency and period: f = ω/(2π) in Hz, T = 2π/ω in seconds.
In short, rad/s is the natural unit for angular speed in the SI system, and converting RPM to rad/s lets you plug values directly into these equations without extra factors.
Common Mistakes and Misconceptions
A frequent error is using 2π/60 ≈ 0.10472 as the conversion factor but rounding too early. For example, 120 RPM × 0.1047 = 12.564 rad/s instead of 12.5664 rad/s. The difference is small for one value but compounds in multi-step calculations. Always keep at least 5 significant figures in intermediate steps.
Another misconception is confusing angular velocity (rad/s) with frequency (Hz). Frequency in Hz is revolutions per second, not radians per second. One Hz equals 2π rad/s. So 120 RPM = 2 Hz = 12.5664 rad/s. The calculator’s second output (rev/s) shows the frequency, which is numerically 1/(2π) times the rad/s value.
Also, be careful with degrees. Some calculators default to degrees for trigonometric functions. Here, the conversion uses radians because 2π rad = 360°. If you mistakenly use 360 instead of 2π in the formula, you’d get degrees per second, which is the third output (720 deg/s for 120 RPM).
How to Choose the Right Unit
Use rad/s when:
- Working with SI units in physics or engineering problems.
- Calculating power from torque (P = τω).
- Using formulas involving integrals or derivatives of angular position.
Use RPM when:
- Reading motor nameplates, engine specs, or machine manuals.
- Comparing speeds of mechanical components where the convention is RPM.
- Estimating rotational speed intuitively (e.g., 3000 RPM is a typical electric motor).
In practice, you’ll often convert RPM to rad/s once at the start of a problem, do all calculations in rad/s, then convert the final answer back to RPM if needed. The reverse conversion is: RPM = rad/s × 60 / (2π).
Real-World Examples
Consider a car engine idling at 800 RPM. The angular velocity is 800 × 2π/60 = 83.7758 rad/s. If the engine produces 150 N·m of torque at that speed, the power output is 150 × 83.7758 = 12,566 W ≈ 12.6 kW ≈ 16.8 hp. Without converting, you’d get a wrong answer.
A hard disk drive spins at 7200 RPM. That’s 7200 × 2π/60 = 753.982 rad/s. The platter edge (radius 0.045 m) moves at v = ωr = 753.982 × 0.045 = 33.9 m/s—about 122 km/h. This linear speed matters for aerodynamic drag and read/write head positioning.
A wind turbine rotor turns slowly, around 15 RPM. That’s 15 × 2π/60 = 1.5708 rad/s. The blade tip (radius 40 m) moves at 62.8 m/s, which is why blade tips are the loudest part and why speed control is critical.
Limits of the Conversion
The conversion is exact and universal—it doesn’t depend on the object’s size, mass, or material. However, it only gives the magnitude of angular velocity, not direction. For vector problems, you must specify the axis of rotation and use the right-hand rule.
Also, this is instantaneous speed. If a motor accelerates from 0 to 3000 RPM over 2 seconds, the average angular acceleration is (3000 × 2π/60)/2 = 157.08 rad/s², but the rad/s value at any moment changes. For such problems, use the time-dependent RPM or angular position function.
Finally, the calculator assumes the RPM value is accurate. In real measurements, tachometers have error, and the actual speed may fluctuate. Always consider measurement uncertainty when using the result in critical engineering work.
Frequently Asked Questions
How many rad/s is 1 RPM? One RPM equals 2π/60 ≈ 0.104719755 rad/s. So 1 RPM is about 0.10472 rad/s. To convert any RPM value, multiply by 0.104719755.
Why is 2π used instead of 360? Radians are defined as the ratio of arc length to radius. A full circle has circumference 2πr, so the angle is 2π radians. Using 360 would give degrees per second, which is not the SI unit and doesn’t work in formulas like P = τω without extra conversion factors.
What’s the difference between rad/s and Hz? Hz measures cycles per second (revolutions per second), while rad/s measures angular displacement per second. Since one revolution is 2π radians, 1 Hz = 2π rad/s ≈ 6.2832 rad/s. For 60 RPM: that’s 1 Hz and 6.2832 rad/s.
Can I convert RPM to rad/s in my head? For rough estimates, multiply RPM by 0.1 (which is 2π/60 ≈ 0.10472). This gives about 4.5% error, acceptable for quick checks. For example, 1200 RPM × 0.1 = 120 rad/s, actual is 125.66 rad/s. For precision, use the calculator or the exact factor 0.104719755.
Does the conversion change if the object is not circular? No. RPM and rad/s describe rotational speed regardless of shape. A square wheel rotating at 10 RPM still has angular velocity 10 × 2π/60 = 1.0472 rad/s, even though its motion is not smooth. The conversion is purely about units, not geometry.
What is the reverse conversion from rad/s to RPM? Multiply rad/s by 60/(2π) ≈ 9.5493. So 10 rad/s = 95.493 RPM. This is useful when you have an angular velocity from a physics problem and need the motor speed in familiar units.
Related
Formula used
in rpm | Rotational speed | RPM | 120 | 0 | 1000000 out radps | Angular velocity | rad/s | rpm * 2 * pi / 60 | 4 out revps | Revolutions per second | rev/s | rpm / 60 | 4 out degps | Angular velocity | deg/s | rpm * 360 / 60 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Volume Calculator in Chemistry: How to Use It0.2000 mol/L
- Volume Calculator in mm: Convert & Calculate100,000 mm³
- Volume Calculator Feet and Inches: How to Use It3.12 ft³
- Volume Calculator: Convert ft to Yards1.00 yd³
- Surfboard Volume Calculator JS: How It Works32.4 L
- Volume Calculator cm to Litres: How to Convert2.500 L