molecalculator

Moles & Molar Mass

Ru Atomic Number & Electron Configuration

Calculator No. 01-9713 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Ruthenium (Ru) has the atomic number 44, meaning every neutral ruthenium atom contains 44 protons in its nucleus and 44 electrons surrounding it. Its ground-state electron configuration is [Kr] 4d7 5s1, a notable exception to the Aufbau principle that you will often see written as 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d7 5s1.

Formula

The calculator above converts between mass, amount in moles, and number of atoms for ruthenium. The key relationships are:

  • Number of atoms = amount (mol) × Avogadro constant = n × 6.02214076 × 1023 mol−1
  • Mass per atom = total mass (g) ÷ number of atoms = m ÷ (n × 6.02214076 × 1023)

Here, n is the amount of ruthenium in moles, m is the mass in grams, and Avogadro’s constant is exactly 6.02214076 × 1023 mol−1. The molar mass of ruthenium is 101.07 g/mol (IUPAC abridged standard atomic weight), which you would use if you wanted to convert a given mass directly to moles.

Worked Example

Using the calculator defaults: enter a mass of 101.07 g of ruthenium and an amount of 1 mol. The number of atoms is:

atoms = 1 mol × 6.02214076 × 1023 mol−1 = 6.022 × 1023 atoms

The mass per atom is:

mass per atom = 101.07 g ÷ (6.022 × 1023) = 1.678 × 10−22 g/atom

These match the headline outputs above (6.022 × 1023 atoms and 1.678 × 10−22 g/atom).

Assumptions

  • The sample is pure ruthenium metal with the standard atomic weight 101.07 g/mol.
  • Avogadro’s constant is taken as exactly 6.02214076 × 1023 mol−1.
  • No isotopic fractionation is considered; natural ruthenium is a mixture of seven stable isotopes.
  • The calculation treats atoms as countable entities; it does not account for any chemical bonding or ionization.

Why Ruthenium’s Configuration Is Unusual

Most textbooks teach the Aufbau principle: fill 5s before 4d because 5s is lower in energy for lighter elements. Ruthenium is one of several transition metals that break the pattern. The actual ground state is [Kr] 4d7 5s1, not [Kr] 4d6 5s2. The reason is that a half-filled 4d subshell (5 electrons) plus a half-filled 5s subshell (1 electron) is more stable than a 4d6 5s2 arrangement. The energy difference between the 4d and 5s orbitals is small, and electron–electron repulsion is reduced by spreading electrons across both subshells. The same effect appears in neighboring elements: niobium (Nb, Z=41) is [Kr] 4d4 5s1, rhodium (Rh, Z=45) is [Kr] 4d8 5s1, and palladium (Pd, Z=46) is [Kr] 4d10 5s0.

How to Write the Configuration Yourself

If you are asked to write the full electron configuration for ruthenium, follow these steps:

  1. Count the electrons: 44 for a neutral atom.
  2. Fill orbitals in the standard order until you reach 44: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d6 (that gives 44 electrons).
  3. Apply the exception: move one electron from 5s to 4d to get 5s1 4d7.
  4. Write the noble-gas shorthand: [Kr] 4d7 5s1 (note that in shorthand, 4d is written before 5s because of the order in the periodic table).

For ions, remove electrons from the highest-energy subshell first. Ru3+ loses the 5s1 electron and then two 4d electrons, giving [Kr] 4d5. Ru2+ loses the 5s1 and one 4d electron, giving [Kr] 4d6.

Common Mistakes and How to Avoid Them

  • Using the Aufbau order blindly: Many students write 4d6 5s2. Always check the periodic table or a reliable reference for transition metals in groups 5–11.
  • Confusing shorthand order: In the noble-gas notation, the 4d subshell is written before 5s even though 5s fills first in the Aufbau diagram. The correct shorthand is [Kr] 4d7 5s1, not [Kr] 5s1 4d7.
  • Mixing up atomic number and mass number: Atomic number 44 is the number of protons. The most common isotope, 102Ru, has a mass number of 102 (44 protons + 58 neutrons). The atomic weight 101.07 is the weighted average of all stable isotopes.
  • Forgetting that configuration is for the ground state: Excited states have different arrangements, but the ground state is the one chemists usually mean.

Where Ruthenium Fits in the Periodic Table

Ruthenium sits in period 5, group 8, between iron (Fe, Z=26) and osmium (Os, Z=76) in the same group. It is a hard, silvery-white transition metal with a density of about 12.37 g/cm3 at room temperature. It is one of the platinum-group metals and is often found as a byproduct of nickel and platinum mining. Ruthenium is highly resistant to corrosion and is used in electrical contacts, wear-resistant coatings, and as a catalyst in chemical reactions, including the production of ammonia and the hydrogenation of organic compounds. Its compounds show a wide range of oxidation states, from +2 to +8, with +3 and +4 being common in aqueous solution.

Frequently Asked Questions

What does the 44 in ruthenium mean?

The 44 is the atomic number, which is the number of protons in the nucleus. Every atom of ruthenium has exactly 44 protons; if it had a different number, it would be a different element. In a neutral atom, there are also 44 electrons.

Why is ruthenium’s configuration [Kr] 4d7 5s1 instead of [Kr] 4d6 5s2?

Because the energy difference between the 4d and 5s orbitals is small for ruthenium, and a half-filled 5s subshell plus a nearly half-filled 4d subshell lowers the total energy. This is a well-known exception to the Aufbau principle, similar to chromium and copper.

How many valence electrons does ruthenium have?

Valence electrons are typically the outermost electrons. For ruthenium, the 5s1 electron is the most obvious valence electron, but the 4d7 electrons also participate in bonding. In practice, ruthenium can use up to 8 electrons for bonding, which is why it shows oxidation states up to +8.

Is ruthenium radioactive?

Natural ruthenium is stable; it has seven stable isotopes. However, many artificial radioactive isotopes exist, such as 106Ru, which is a fission product. Those are not found in significant amounts in nature.

How do I calculate the number of neutrons in a ruthenium atom?

Subtract the atomic number from the mass number. For the most common isotope 102Ru, neutrons = 102 − 44 = 58. For other isotopes, use the same formula with their mass number.

Does ruthenium have any practical uses that depend on its electron configuration?

Yes. Its ability to adopt multiple oxidation states and its d-electron count make it an excellent catalyst in organic reactions, such as olefin metathesis (the Grubbs catalyst uses ruthenium). Its corrosion resistance also comes from its stable metallic bonding, which is a consequence of its electron configuration.

Related

Formula used
in m | Mass of ruthenium | g | 101.07 | 0
in n | Amount of ruthenium | mol | 1 | 0
out atoms | Number of Ru atoms | - | n * 6.02214076e23 | 4
out mass_per_atom | Mass per atom | g/atom | m / (n * 6.02214076e23) | 12

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →