The SI unit for molar concentration is the mole per cubic metre (mol/m³), also written mol·m⁻³. This calculator works out molarity from the mass of a solute, its molar mass, and the final solution volume; it reports the result in mol/L and millimolar (mM), common laboratory units related to the SI unit.
Formula
Molar concentration, or molarity, is the amount of dissolved substance divided by the final volume of the solution:
c = n / V = m / (M × V)
- c is molar concentration, in mol/L in the calculator output.
- n is the amount of solute, in moles (mol).
- V is the final solution volume, in litres (L).
- m is the solute mass, in grams (g).
- M is the solute molar mass, in grams per mole (g/mol); therefore n = m/M.
The SI expression uses volume in cubic metres: c = n/V, with V in m³, giving mol/m³. Since 1 m³ = 1000 L, 1 mol/L = 1000 mol/m³. The calculator converts the entered volume from millilitres to litres by dividing by 1000, then calculates mol/L. It converts mol/L to mM by multiplying by 1000; 1 mM = 0.001 mol/L = 1 mol/m³.
Worked Example
Using the calculator’s defaults—2.922 g solute, molar mass 58.44 g/mol, and a final solution volume of 250 mL:
- Find the amount of solute: n = 2.922 g ÷ 58.44 g/mol = 0.050000 mol.
- Convert the volume: V = 250 mL ÷ 1000 = 0.250 L.
- Calculate molarity: c = 0.050000 mol ÷ 0.250 L = 0.2000 mol/L.
- Convert to millimolar: 0.2000 mol/L × 1000 = 200.00 mM.
The SI-unit form of the same result is 0.2000 mol/L × 1000 = 200.0 mol/m³. The calculator displays 0.2000 mol/L and 200.00 mM at its specified precision.
Assumptions
- The entered volume is the final volume of the solution, not the amount of solvent added.
- The solute’s molar mass is appropriate for the substance and chemical form being measured.
- The calculation treats the stated mass and volume as accurate; it does not account for measurement uncertainty, purity, chemical reaction, or volume changes on mixing.
What Molar Concentration Means
Molar concentration describes how much of a specified chemical substance is present in a given volume of solution. For example, a 0.20 mol/L solution contains 0.20 mol of the specified solute in each litre of final solution. The word “specified” matters: concentration may refer to formula units, molecules, or a particular ion, depending on how the solution and its chemistry are described.
In SI, the coherent unit for concentration is mol/m³ because the SI base unit for volume is the cubic metre and the SI unit for amount of substance is the mole. In chemistry, mol/L—often written M—is much more familiar and convenient for ordinary laboratory volumes. It is a non-SI unit accepted for use with SI, not a different quantity. A value of 1 M means 1 mol/L, equivalent to 1000 mol/m³.
Do not confuse molarity with amount of substance or mass concentration. Moles alone do not state a concentration unless a volume is also given. Mass concentration, such as g/L, reports mass per volume; converting it to mol/L requires the relevant molar mass.
Using the Calculator Correctly
Enter the solute mass, its molar mass, and the final solution volume. The default molar mass, 58.44 g/mol, is a conventional value for sodium chloride based on standard atomic weights. The default mass and volume are illustrative values chosen to give a straightforward result; change them to match the chemical and calculation you need.
- Use the molar mass for the exact chemical form, including waters of crystallization when present. An anhydrous compound and its hydrate do not have the same molar mass.
- Use the mass of the solute, not the total mass of the prepared solution.
- Enter the final solution volume after the solute is dissolved and the solution has been brought to its intended volume. Do not substitute the volume of solvent initially added.
- Keep units consistent with the fields: mass in grams, molar mass in g/mol, and volume in millilitres.
For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor. This calculator is for general study and lab-planning arithmetic, not clinical or medication work.
Common Unit Mix-Ups and Limits
A frequent error is treating millilitres as litres without converting. If you divide by 250 instead of 0.250 L in the worked example, the result is 0.000200 mol/mL, not 0.200 mol/L. The two expressions can describe the same concentration only when their units are handled correctly: 0.000200 mol/mL equals 0.200 mol/L.
Another common mistake is using a solvent volume in place of final solution volume. Dissolving a solid can change the total volume, so adding a measured amount of water equal to the target volume does not generally produce that target final volume. The formula also assumes the entered amount refers to the solute whose concentration is being reported. It does not automatically calculate the concentration of ions after dissociation or account for reactions between substances.
Results should not imply more precision than the input measurements support. The calculator’s displayed decimal places are formatting, not a claim that the original mass, volume, or molar mass is exact. For dilute solutions, temperature-related volume changes may matter when high accuracy is needed, because molarity is based on solution volume, which can vary with temperature.
Related Concentration Units
- mol/m³: the SI unit of molar concentration; 1 mol/L equals 1000 mol/m³.
- mol/L or M: moles per litre; widely used for preparing and describing solutions.
- mmol/L or mM: millimoles per litre; 1 mM equals 0.001 mol/L.
- g/L: grams per litre; a mass concentration that can be converted to mol/L by dividing by molar mass in g/mol.
These units are not interchangeable by number alone. For instance, 2 g/L is not automatically 2 mol/L: its molar concentration depends on the compound’s molar mass. Likewise, a value in mM must be divided by 1000 to express it in mol/L.
Frequently Asked Questions
What is the SI unit for molar concentration?
The SI unit is mol per cubic metre, written mol/m³. Molarity in mol/L is commonly used in chemistry and equals 1000 times the value in mol/m³.
Is mol/L an SI unit?
Mol/L is not the coherent SI unit for volume-based concentration, since the SI volume unit is m³. It is nevertheless widely accepted for use with SI and is standard in much chemistry work.
How do I convert mol/L to mol/m³?
Multiply the value in mol/L by 1000. For example, 0.20 mol/L equals 200 mol/m³.
Is molarity the same as molality?
No. Molarity is moles of solute per volume of solution, usually in mol/L. Molality is moles of solute per mass of solvent, usually in mol/kg, so it uses a different denominator.
Does the final volume mean the volume of water I add?
No. It means the volume of the complete solution after the solute has dissolved. The solvent amount may differ from the final solution volume.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculator in Hindi: Meaning, Usage and Examples0.2000 mol/L
- Volume Strength Formula in Terms of Molarity11.20 volumes
- H2O2 Volume Strength to Molarity Calculator0.893 mol/L
- Volume Strength to Molarity: Formula and Calculator0.0409 mol/L
- Molar Volume: Definition, Formula, and Calculator22.414 L/mol
- Molar Volume of a Gas Calculator and Formula22.4140 L/mol