The formula for sodium hydroxide in water is NaOH(aq), where (aq) means dissolved in water; the dissolved compound is represented by NaOH, and its molar mass is 40.00 g/mol. This calculator works out the solution’s molarity from the mass of NaOH and the final solution volume, and also reports the concentration in millimolar.
Formula
Molarity is the amount of dissolved solute in moles divided by the final volume of solution in litres. For sodium hydroxide:
c = (m / M) / (V / 1000)
- c is molarity, in mol/L.
- m is the mass of sodium hydroxide, in grams.
- M is sodium hydroxide’s molar mass, 40.00 g/mol, calculated from the standard atomic weights Na = 22.990, O = 15.999, and H = 1.008 g/mol (sum: 39.997 g/mol, conventionally rounded to 40.00 g/mol).
- V is final solution volume, entered in millilitres; dividing by 1000 converts mL to L.
The millimolar conversion is cmM = c × 1000, because 1 mol/L equals 1000 mmol/L. The chemical formula NaOH describes the compound, not a unique solution strength: concentration depends on how much NaOH is present and the final volume.
Worked Example
Using the calculator’s default inputs, 1 g NaOH and a final solution volume of 100 mL:
- Convert mass to amount: 1 g ÷ 40.00 g/mol = 0.025000 mol.
- Convert the final volume: 100 mL ÷ 1000 = 0.10000 L.
- Divide moles by volume: 0.025000 mol ÷ 0.10000 L = 0.2500 mol/L.
- Convert to millimolar: 0.2500 mol/L × 1000 = 250.00 mM.
Assumptions
- The input mass is pure, anhydrous sodium hydroxide. Impurities or absorbed water reduce the actual amount of NaOH represented by a weighed mass.
- The entered volume is the final volume of the solution, not the amount of water used.
- The calculation reports analytical concentration from mass and volume. It does not calculate pH or account for activity effects in concentrated solutions.
- For any bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.
What NaOH(aq) Means
Sodium hydroxide is an ionic compound made of sodium ions (Na+) and hydroxide ions (OH−). In water, it dissociates extensively into these ions. The notation NaOH(aq) indicates sodium hydroxide dissolved in water; it is not a different molecular formula or a stated concentration. A formula such as 0.25 mol/L NaOH(aq) gives the concentration explicitly.
Because each formula unit supplies one sodium ion and one hydroxide ion, an ideal dilute solution has equal analytical concentrations of Na+ and OH− from the NaOH. That simple relationship does not mean every real solution behaves ideally: concentrated solutions can show activity effects, and other dissolved substances can also affect measurements.
Using the Result and Choosing Inputs
Enter the mass of NaOH and the final volume you intend to describe. The calculator assumes the mass is all NaOH and uses 40.00 g/mol for its molar mass. The output is a calculated molarity, not a measurement; it is useful for chemistry arithmetic, checking a stated concentration, or planning a calculation when the required inputs are already known.
- For a solution described as 2 g in a final volume of 500 mL, use 2 g and 500 mL. Do not enter 500 as litres.
- For 0.1 mol/L in 1 L, the corresponding pure NaOH mass is 0.1 mol/L × 1 L × 40.00 g/mol = 4.000 g. This is a mass calculation, not a preparation instruction.
- If a reagent’s stated purity is below 100%, the mass alone is not enough for this calculator’s pure-reagent assumption. A purity-adjusted calculation requires that purity to be accounted for separately.
Do not confuse molarity with mass concentration. For example, 0.25 mol/L NaOH corresponds to 0.25 × 40.00 = 10.00 g/L under the stated molar-mass convention. A label of 10 g/L is not itself a molarity until it is divided by the molar mass.
Common Errors and Limits
A frequent mistake is using the volume of water added rather than the final solution volume. Molarity uses the volume occupied by the completed solution. Another is mixing millilitres and litres: the calculator explicitly divides the entered mL value by 1000. Rounding the molar mass early or rounding intermediate values too aggressively can also slightly change a result, so retain digits until the final displayed answer.
Sodium hydroxide is hygroscopic: it absorbs moisture from the air, and it can also absorb carbon dioxide, forming carbonate-containing material. Consequently, an old or poorly stored solid may not have the assumed composition, and mass-based arithmetic may not match the true concentration. For concentration-sensitive analytical work, use an appropriate validated method to establish the actual concentration rather than relying only on a nominal weighed mass.
This calculator does not account for volume contraction or expansion, temperature-dependent volume, impurities, chemical reactions with other ingredients, or non-ideal solution behavior. It also does not infer pH from concentration. A pH calculation requires additional assumptions and, for practical work, the meter reading is the real check because temperature and ionic strength shift pH.
Safety
Sodium hydroxide is corrosive and can cause severe skin and eye burns. Dissolving it in water releases heat, so concentrated solutions present both chemical and thermal hazards. Avoid contact and splashes; use suitable protective equipment and controls specified by the SDS and the governing lab procedure. Never treat a calculator result as a substitute for a risk assessment or an approved method. If exposure occurs, follow the SDS and local emergency guidance promptly.
Frequently Asked Questions
What is the chemical formula for sodium hydroxide solution?
It is written NaOH(aq). NaOH is the formula for sodium hydroxide, and (aq) states that it is in aqueous solution. The notation alone does not specify concentration.
What is the molar mass of NaOH?
Using Na = 22.990, O = 15.999, and H = 1.008 g/mol gives 39.997 g/mol, commonly rounded to 40.00 g/mol.
How do I calculate the molarity of NaOH?
Divide the NaOH mass in grams by 40.00 g/mol to obtain moles, convert final volume from millilitres to litres by dividing by 1000, then divide moles by litres.
Is NaOH a strong base in water?
Yes. Sodium hydroxide dissociates extensively in water, producing hydroxide ions. The measured behavior of a real solution can still depend on concentration, temperature, and other dissolved substances.
Does NaOH(aq) tell me the solution’s strength?
No. It identifies sodium hydroxide dissolved in water. Strength must be stated separately, for example as mol/L, g/L, or a mass percentage with its basis defined.
Related
Formula used
in m | Mass of sodium hydroxide | g | 1 | 0 in v | Final solution volume | mL | 100 | 0.001 out c | Molarity | mol/L | (m / 40.00) / (v / 1000) | 4 out cm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Air Density and Altitude: What Changes as You Climb1.225 kg/m^3
- Air Pressure and Density: How They Are Related
- DMF Density vs Pressure Calculator949.15 kg/m3
- Density vs Pressure: What Each Measures and Why1.000 kg/m^3
- Density vs Pressure Graph: How to Read the Relationship1,000.046 kg/m^3
- Air Pressure vs. Air Density: What’s the Difference?