Sodium hydroxide (NaOH) has a molar mass of 39.997 g/mol, conventionally rounded to 40.00 g/mol. This calculator uses the mass of NaOH, its molar mass, and the final solution volume to calculate molarity and millimolar concentration; it does not calculate a different molar mass for the solution itself.
Formula
Molarity is the amount of solute in moles divided by the final volume of solution in liters:
c = (m / M) / (V / 1000)
- c is molarity in mol/L.
- m is the mass of sodium hydroxide in grams.
- M is its molar mass in g/mol, here 39.997 g/mol.
- V is the final solution volume in milliliters; dividing by 1000 converts mL to L.
The second output converts mol/L to mmol/L (mM) by multiplying by 1000. The molar mass comes from the formula NaOH: sodium 22.990, oxygen 15.999, and hydrogen 1.008 g/mol. Their sum is 39.997 g/mol. Atomic weights and reported molar masses are commonly rounded, so 40.00 g/mol is also widely used for routine calculations.
Worked Example
Using the calculator’s default values—2.922 g NaOH, 39.997 g/mol, and a final solution volume of 250 mL:
- Find the amount in moles: 2.922 g / 39.997 g/mol = 0.073055 mol (approximately).
- Convert the final volume to liters: 250 mL / 1000 = 0.250 L.
- Calculate molarity: 0.073055 mol / 0.250 L ≈ 0.2922 mol/L.
- Convert to millimolar: 0.2922 mol/L × 1000 = 292.2 mmol/L, or 292.20 mM at the calculator’s displayed precision.
The calculator reports molarity as 0.2922 mol/L and millimolar concentration as 292.20 mM. The displayed precision is not a claim that the mass or volume was measured to that many significant figures.
Assumptions
- The entered mass is pure, dry NaOH; impurities, absorbed water, or carbon dioxide are not corrected for.
- The volume entered is the final solution volume, not the volume of water used as solvent.
- The calculation is a concentration calculation based on formula units of NaOH. It does not predict activity, pH, or solution density.
Molar Mass Versus Solution Concentration
Molar mass belongs to a chemical substance and expresses the mass of one mole. Dissolving NaOH in water does not change the molar mass of NaOH. A solution, however, contains both solute and solvent, so its overall composition depends on how much NaOH is present and the final volume. Its concentration is therefore not a molar mass.
For example, 1.000 mol of NaOH corresponds to about 39.997 g of pure NaOH, whether it is later dissolved in a small or large volume. The resulting molarity differs with volume. A 1.000 mol/L solution contains one mole of NaOH per liter of final solution; it does not mean that a liter of solution weighs 39.997 g.
NaOH is an ionic solid. In water it separates into sodium ions and hydroxide ions. That behavior matters for properties such as pH and conductivity, but the molar-mass calculation still uses one NaOH formula unit per mole. For a strongly alkaline solution, measured pH can also depend on concentration, temperature, and activity effects; molarity alone is not a complete description of every solution property.
When to Use the Calculator
Use this calculation for general chemistry and lab-planning arithmetic when you know the mass of NaOH and the final volume of the solution. It can also help check a target concentration after a preparation has been specified by an approved method. Enter grams, g/mol, and milliliters in the units shown; the formula explicitly converts milliliters to liters.
For a target molarity, the same relationship can be rearranged: mass in grams = target molarity × final volume in liters × molar mass in g/mol. For example, to find a required mass, use the desired concentration and final volume—not the starting volume of water. That rearrangement is useful for planning, but it does not replace a validated lab procedure or account for reagent purity.
For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor. Sodium hydroxide is corrosive and can cause severe skin and eye burns. Use the protective measures and spill-response guidance specified by the applicable SDS and local laboratory rules; do not treat a calculator result as handling instructions.
Common Errors and Limits
- Confusing molar mass with molarity: 39.997 g/mol is the molar mass; mol/L is the concentration of a particular solution.
- Using water volume instead of final volume: the denominator is the volume of the completed solution. Dissolving a solid can change the volume, so the volume of water initially measured is not necessarily the final volume.
- Mixing units: the calculator expects mass in grams and volume in milliliters. If volume is already in liters, convert it to milliliters before entering it.
- Assuming reagent pellets are perfectly pure and dry: NaOH can absorb moisture and carbon dioxide from air. If the actual NaOH content differs from the assumed purity, the true concentration will differ from the calculated value.
- Overinterpreting decimal places: output digits are determined by the display setting, but the reliable precision depends on the input measurements and reagent composition.
The equation gives formal molarity from the stated inputs. It does not account for weighing error, volume-measurement uncertainty, temperature-dependent volume changes, or chemical contamination. For high-accuracy work, use the appropriate standardized method and report measurement uncertainty.
Frequently Asked Questions
What is the molar mass of NaOH?
It is 39.997 g/mol from the conventional atomic weights Na 22.990, O 15.999, and H 1.008 g/mol. It is often rounded to 40.00 g/mol.
Does sodium hydroxide solution have a molar mass?
NaOH has a molar mass, but a solution is a mixture of NaOH and water. The useful quantity for describing its composition is usually concentration, such as molarity or mass fraction.
How many grams are in one mole of NaOH?
One mole of NaOH has a mass of approximately 39.997 g, or 40.00 g when rounded to two decimal places.
How do I calculate NaOH molarity from grams?
Divide the NaOH mass in grams by 39.997 g/mol to get moles, then divide by the final solution volume in liters. Convert milliliters to liters by dividing by 1000.
Is 40 g/mol an exact value?
No. It is a convenient rounded value. Using 39.997 g/mol gives more digits from the stated atomic weights, though the practical accuracy still depends on the reagent and measurements.
Related
Formula used
in m | Mass of NaOH | g | 2.922 | 0 in mm | Molar mass of NaOH | g/mol | 39.997 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mmol/L | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Pressure Density Depth Formula for Fluids98,066 Pa
- Pressure Density Temperature Equation Calculator100,961.74 Pa
- Pressure Density Cup: What It Measures and How It Works1.0000 g/mL
- Pressure, Density, and Temperature: How They Relate101,307 Pa
- Pressure-Based vs Density-Based Solvers in CFD
- Pressure-Based vs Density-Based Solvers in CFD