molecalculator

Moles & Molar Mass

Sodium Hydroxide UN Number and Transport Classes

Calculator No. 01-1197 · Updated · Formula and assumptions shown below

UN number 1,823
Physical form
Solid
Set in the form below
You enter
Physical form
You get
UN number
Rounding
0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Sodium hydroxide is assigned UN number 1823 when transported as a solid, and UN number 1824 when transported as a solution. This page’s calculator identifies the UN entry from the physical form you select and reports the associated proper shipping name and primary hazard class.

Formula

The lookup is categorical rather than a chemical calculation: UN number = 1823 for sodium hydroxide, solid; UN number = 1824 for sodium hydroxide solution. The input “form” selects the applicable value. UN numbers are four-digit identification numbers used in transport regulations; they are not molecular formulae, concentrations, or measures of danger. The result assumes the material is sodium hydroxide and that its physical form is correctly identified.

Worked Example

Select Solid. The selected value is 1823, so the calculator returns UN number 1823. For comparison, selecting Solution returns UN number 1824. These are separate transport entries, not alternative numbers for the same form.

Assumptions

  • The material is sodium hydroxide, also called caustic soda or lye.
  • “Solid” means the substance is being shipped as a solid; “Solution” means it is shipped dissolved in a liquid.
  • This lookup does not decide packaging, quantity limits, packing group, or whether a particular shipment qualifies for an exception.

What UN 1823 and UN 1824 Mean

UN 1823 is the transport identification number for SODIUM HYDROXIDE, SOLID. UN 1824 is the number for SODIUM HYDROXIDE SOLUTION. The distinction matters because transport entries describe the shipped material, not merely its chemical ingredients. A bag of pellets and a drum of aqueous caustic soda therefore do not use the same UN number.

Both entries are associated with Class 8, corrosive substances, under widely used dangerous-goods transport systems. Class 8 identifies substances that can cause severe damage to living tissue or corrode materials. The exact applicable requirements depend on the mode of transport and the governing rules—for example, road, rail, air, or sea regulations—and may also depend on concentration, packaging, quantity, and the shipment’s circumstances.

A UN number is not a complete shipping description. A dangerous-goods declaration or package marking may require additional details, such as the proper shipping name, hazard class, packing group, and other information required by the applicable rules. Do not infer that knowing “1824” alone makes a shipment correctly classified or prepared.

Why Physical Form Changes the Number

Sodium hydroxide (NaOH) is a strong base sold in several forms. At ordinary conditions, pure sodium hydroxide is a solid, often supplied as pellets, flakes, or granules. It is also commonly supplied dissolved in water at different concentrations. Transport listings distinguish the solid from the solution because the material’s form and properties affect how it is classified and handled.

For a mixture or product, use its actual shipping classification rather than assuming the answer from the word “sodium hydroxide” alone. A solution may contain other ingredients, and its concentration or formulation can affect classification under specific rules. Consult the product’s current safety data sheet (SDS), especially the transport-information section, and verify the applicable regulations. An SDS is an important source, but it does not replace regulatory classification or competent shipping advice where that is required.

  • Solid caustic soda: the relevant basic entry is UN 1823, SODIUM HYDROXIDE, SOLID.
  • Aqueous caustic soda: the relevant basic entry is UN 1824, SODIUM HYDROXIDE SOLUTION.
  • Formulated mixtures: check the exact product documentation and current rules; do not choose an entry solely by recognizing one ingredient.

Corrosive Hazards and Safe Handling

Sodium hydroxide can cause severe skin burns and eye damage. Solid particles and concentrated solutions are particularly hazardous, but dilute solutions can also irritate or injure. Contact with moisture releases heat as the solid dissolves, and the resulting liquid can splash. Sodium hydroxide also reacts with acids, and contact with some metals can produce flammable hydrogen gas. These hazards are reasons to follow the relevant SDS and workplace procedures, not to handle the substance based only on its transport number.

For transport or storage, use compatible, tightly closed packaging and follow the product’s specified controls. Keep the material away from incompatible substances, including acids, and prevent contact with skin and eyes. Use appropriate protective equipment and spill procedures set by the SDS and site rules. If exposure occurs, follow the emergency instructions in the SDS and seek appropriate urgent assistance; do not rely on a UN number as first-aid guidance.

For laboratory work, follow your lab method, the safety data sheet (SDS) and your supervisor. This lookup is for general identification, not instructions for preparing, diluting, or repackaging caustic solutions.

Common Classification Mistakes

  • Using one number for every form: 1823 is for the solid entry; 1824 is for the solution entry.
  • Treating the UN number as a hazard class: the number identifies a transport entry. Class 8 is the hazard class associated with these corrosive entries.
  • Assuming the number gives a concentration: neither number specifies how strong a sodium hydroxide solution is.
  • Using an old or generic document: products and rules can change. Check current product documentation and the regulations for the shipment’s route and mode.
  • Assuming every mixture has the same entry: ingredients and formulation can affect classification. Confirm the specific product’s transport information.

Another frequent misconception is that a UN number by itself establishes how dangerous a substance is in every situation. It is an identification tool within a regulatory system. Actual risk also depends on the amount, concentration, packaging, exposure route, and conditions of handling.

Frequently Asked Questions

What is the UN number for sodium hydroxide?
It is UN 1823 for sodium hydroxide in solid form, and UN 1824 for sodium hydroxide solution.

Is sodium hydroxide UN 1823 or UN 1824?
Both entries exist. Choose 1823 for the solid and 1824 for a solution, subject to checking the product’s specific transport classification.

What hazard class is sodium hydroxide?
The basic entries for the solid and solution are Class 8, corrosive substances. Consult the applicable transport rules and product documents for the full classification.

Does UN 1824 mean a particular concentration?
No. The number identifies the sodium hydroxide solution transport entry; it does not state the solution’s concentration.

Where can I verify the UN number for a product?
Check the current SDS’s transport-information section and the applicable dangerous-goods regulations. For a mixture or unusual shipment, confirm the classification with an appropriately qualified transport-safety contact.

Related

Formula used
sel form | Physical form | Solid=1823, Solution=1824
out un | UN number | - | form | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →