molecalculator

Moles & Molar Mass

Solution Percent by Mass Equation

Calculator No. 01-11152 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The percent by mass equation expresses the concentration of a solution as the mass of the solute divided by the total mass of the solution, multiplied by 100%. It is written as: percent by mass = (mass of solute ÷ mass of solution) × 100%, where the mass of the solution is the sum of the solute and solvent masses. This simple formula is widely used in chemistry, pharmacy, and industry to describe how much of a substance is dissolved in a mixture.

Formula

The percent by mass formula is:

Percent by mass (%) = (mass of solute / mass of solution) × 100

  • Mass of solute – the mass of the substance being dissolved (in grams, kg, etc.)
  • Mass of solution – the total mass of the solute plus the solvent (in the same unit as the solute mass)

For example, if you dissolve 10 g of salt in 90 g of water, the total solution mass is 100 g, so the percent by mass is (10/100) × 100 = 10%.

Worked Example

Let’s use the default values from the calculator above to illustrate a related concentration calculation. Suppose you have 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) and you dissolve it in water to make a final solution volume of 250 mL. What is the molarity?

  1. Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L
  2. Calculate moles of solute: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
  3. Molarity = moles / liters = 0.05000 mol / 0.250 L = 0.2000 mol/L

The calculator gives 0.2000 mol/L (or 200.0 mM), matching our step-by-step calculation. Note that this example uses molarity, not percent by mass, because the calculator block above is designed for molarity. For percent by mass, you would need the mass of the solution, not just the volume.

Assumptions

  • The solution is homogeneous – the solute is uniformly distributed.
  • No chemical reaction occurs between solute and solvent that changes the total mass.
  • Mass is additive: mass of solution = mass of solute + mass of solvent.
  • For volume-based calculations, the density of the solution is assumed to be known or measured; percent by mass does not require volume.

How to Calculate Percent by Mass

To compute percent by mass, follow these steps:

  1. Weigh the solute (the substance being dissolved).
  2. Weigh the solvent (the liquid or solid it is dissolved in).
  3. Add the two masses to get the total solution mass.
  4. Divide the solute mass by the total solution mass.
  5. Multiply by 100 to get the percentage.

For example, to make a 5% glucose solution, you could mix 5 g of glucose with 95 g of water. The total mass is 100 g, so the percent by mass is (5/100) × 100 = 5%.

When to Use Percent by Mass vs. Other Units

Percent by mass is most useful when you are working with solid solutes and liquid solvents, especially when temperature changes could affect volume. Unlike molarity (moles per liter) or molality (moles per kilogram of solvent), percent by mass does not change with temperature because it depends only on masses, not volumes. This makes it ideal for:

  • Preparing solutions in the lab where precise mass measurements are easier than volume measurements.
  • Commercial products like household bleach (typically 5–6% sodium hypochlorite) or hydrogen peroxide (3% solution).
  • Nutritional labels, where “percent by mass” is often used for ingredients.

However, for reactions that require exact mole ratios, molarity is usually more convenient because it directly relates to stoichiometry. Percent by mass requires converting to moles using the molar mass if you need molar quantities.

Common Mistakes and Misconceptions

One common mistake is using the volume of the solution instead of its mass. Percent by mass requires mass, not volume. If you only know the volume, you must multiply by the density to get the mass of the solution.

Another misconception is confusing percent by mass with percent by volume. For example, “5% acetic acid” in vinegar is often percent by volume (5 mL acetic acid per 100 mL solution), not percent by mass. Always check which basis is intended.

Also, be careful with the denominator: it is the total solution mass, not the solvent mass. Some people mistakenly divide by the solvent mass, which gives a different value called “mass fraction” relative to solvent, not the standard percent by mass.

Converting Between Percent by Mass and Molarity

If you know the percent by mass, the density of the solution, and the molar mass of the solute, you can convert to molarity using the formula:

Molarity (mol/L) = (percent by mass / 100) × density (g/mL) × 1000 / molar mass (g/mol)

For example, a 10% NaCl solution with a density of 1.07 g/mL has a molarity of (0.10 × 1.07 × 1000) / 58.44 = 1.83 mol/L.

Conversely, to convert molarity to percent by mass, you need the density: percent by mass = (molarity × molar mass) / (density × 10).

Frequently Asked Questions

What is the difference between percent by mass and mass fraction?

Percent by mass is simply the mass fraction multiplied by 100. For example, a mass fraction of 0.25 is the same as 25% by mass. The terms are often used interchangeably, but “percent” implies the ×100 factor.

Can I use percent by mass for gases?

Yes, you can express the composition of a gas mixture by mass percent, but it is less common than mole fraction or volume percent because gases are usually measured by volume or pressure. For gases, mass percent is calculated the same way: mass of a component divided by total mass of the mixture, times 100.

How do I make a solution with a specific percent by mass?

Weigh the solute, then add solvent until the total mass reaches the desired value. For example, to make 100 g of a 5% solution, weigh 5 g of solute and add 95 g of solvent. Mix thoroughly.

Does percent by mass depend on temperature?

No, because it is based on mass, which does not change with temperature. This is an advantage over volume-based concentrations like molarity, which can change as the solution expands or contracts.

What is the percent by mass of a solution if I add 20 g of salt to 80 g of water?

The total mass is 20 + 80 = 100 g. The percent by mass is (20/100) × 100 = 20%. Note that this is not the same as 20% salt in water by volume, which would be different.

Is percent by mass the same as weight/weight percent?

Yes, percent by mass is often called weight/weight percent (w/w%) because it uses weights (masses) of solute and solution. It is distinct from volume/volume percent (v/v%) or weight/volume percent (w/v%).

Safety and Lab Practice

When preparing solutions in the lab, always follow your lab method, the safety data sheet (SDS) for the chemicals involved, and your supervisor’s instructions. Wear appropriate personal protective equipment, such as gloves and safety goggles, especially when handling concentrated acids, bases, or organic solvents. Never mix chemicals without knowing their hazards. For percent by mass calculations, ensure you measure masses accurately and use the correct total mass. If you are preparing a solution for a biological assay, remember that percent by mass may not reflect the active concentration if the solute is hydrated or impure; check the label for purity.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →