molecalculator

Moles & Molar Mass

Aspirin Structural Formula and Molecular Structure

Calculator No. 01-4264 · Updated · Formula and assumptions shown below

Mass of aspirin 180.159 g
Number of aspirin molecules
6.022 × 1023 molecules
Result, rounded to 3 decimal places
Molecular weight
180.159 g/mol
Set in the form below
Amount of aspirin
1 mol
Set in the form below
You enter
Molecular weight (g/mol), Amount of aspirin (mol)
You get
Mass of aspirin (g), Number of aspirin molecules (molecules)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Aspirin’s structural formula is C₆H₄(OCOCH₃)COOH, also written C₉H₈O₄. Its systematic name is 2-acetoxybenzoic acid: a benzene ring bearing a carboxylic acid group and an acetoxy group on neighboring carbon atoms.

Formula

The calculator converts an amount of aspirin in moles to mass in grams, using m = n × M. Here, m is mass in grams, n is amount in moles, and M is molar mass in grams per mole. It also estimates the number of molecules using N = n × NA, where N is molecule count and the exact Avogadro constant, NA, is 6.02214076 × 1023 mol−1.

Aspirin’s molar mass is about 180.159 g/mol, calculated from its formula with the standard atomic weights C = 12.011, H = 1.008, and O = 15.999: (9 × 12.011) + (8 × 1.008) + (4 × 15.999) = 180.159 g/mol. The formula block treats this as an input so a reader can substitute a different convention or value if needed.

Worked Example

Using the defaults, the amount is 1 mol and the molar mass is 180.159 g/mol.

  • Mass: m = n × M = 1 mol × 180.159 g/mol = 180.159 g, shown as 180.159 g.
  • Molecules: N = n × NA = 1 mol × 6.02214076 × 1023 mol−1 = 6.02214076 × 1023, shown as 6.022 × 1023 molecules.

Assumptions

  • The calculation counts pure aspirin molecules and uses the molecular formula C₉H₈O₄.
  • The molar mass is based on the stated abridged standard atomic weights; displayed values are rounded.
  • This is general molecular arithmetic, not a method for medical or medication calculations.

What the Structural Formula Shows

The compact expression C₆H₄(OCOCH₃)COOH makes the arrangement of aspirin’s atoms clearer than the molecular formula alone. C₆H₄ represents the benzene ring after two of its hydrogen positions have been replaced by attached groups. One substituent is –COOH, the carboxylic acid group. The other is –OCOCH₃, an acetoxy group, which consists of an oxygen attached to an acetyl carbonyl group.

Those two substituents sit next to each other on the ring. In systematic naming, “2-” indicates that the acetoxy group is at position 2 relative to the carboxylic acid group at position 1. This neighboring, or ortho, arrangement is part of aspirin’s identity; simply listing the same numbers of carbon, hydrogen, and oxygen atoms would not specify that connectivity.

A displayed structural formula draws the six-membered ring, alternating double bonds, and bonds to each substituent. A skeletal drawing may omit carbon symbols at ring corners and most carbon-bound hydrogen symbols, following standard organic-chemistry conventions. These are different visual styles for representing the same structure.

Structural, Molecular, and Empirical Formulas

Several kinds of chemical formula answer different questions:

  • Molecular formula, C₉H₈O₄: gives the total number of each type of atom in one molecule, but not their connections.
  • Condensed structural formula, C₆H₄(OCOCH₃)COOH: groups atoms to show how the main parts connect, including the acid and ester-like acetoxy group.
  • Empirical formula, C₉H₈O₄: gives the simplest whole-number ratio of atoms. For aspirin, it is the same as the molecular formula because the subscripts have no shared divisor greater than one.

A common point of confusion is that “C₉H₈O₄” is not, by itself, a structural formula in the strict sense. It is a molecular formula. It confirms composition and supports molar-mass calculation, but two compounds can share a molecular formula while differing in how their atoms are connected. The condensed formula or a structural drawing communicates that additional information.

How Aspirin’s Groups Relate to Its Chemistry

Aspirin is an aromatic carboxylic acid and an ester. Its carboxyl group can donate a proton, which is why aspirin is classified as an acid. The acetoxy portion contains the ester linkage that distinguishes aspirin from salicylic acid, a related compound. In salicylic acid, the corresponding ring substituent is a hydroxyl group rather than the acetylated oxygen group found in aspirin.

This difference is also relevant to aspirin’s biological action. Aspirin can transfer its acetyl group to cyclooxygenase enzymes, irreversibly inhibiting them; this reduces the formation of prostaglandins and thromboxanes involved in processes such as inflammation and platelet activity. The molecular structure helps explain the chemistry, but a structural formula alone does not determine a safe or appropriate use. This page’s calculator is only for general chemistry arithmetic and must not be used for medication decisions.

Using the Calculator and Reading the Result

Enter the amount in moles and the molar mass in grams per mole. The default molar mass corresponds to aspirin, while the default amount of 1 mol makes the arithmetic easy to inspect. The mass output is the product of those inputs; the molecule-count output uses Avogadro’s constant.

For example, a smaller amount of 0.001 mol corresponds to 0.180159 g by the same relationship. The number of molecules is a theoretical count based on the amount in moles, not a count made by observing individual molecules. In practical chemistry, measured samples can contain impurities, and balances have finite precision, so reported digits should reflect the quality of the actual measurements.

Check units before interpreting an answer. The formula expects moles, not millimoles: 1 mmol is 0.001 mol. If entering millimoles, convert to moles first or the calculated mass and molecule count will be 1,000 times too large. Similarly, a molar mass expressed in kilograms per mole cannot be entered as though it were grams per mole.

Frequently Asked Questions

What is the structural formula of aspirin?
C₆H₄(OCOCH₃)COOH is a common condensed structural formula. It shows a benzene ring with neighboring carboxylic acid and acetoxy groups.

What is aspirin’s molecular formula?
The molecular formula is C₉H₈O₄: each aspirin molecule contains 9 carbon atoms, 8 hydrogen atoms, and 4 oxygen atoms.

Is C₉H₈O₄ a structural formula?
It is usually called the molecular formula because it states atom counts, not the connections between atoms. C₆H₄(OCOCH₃)COOH communicates more structural detail.

What is aspirin’s molar mass?
Using C = 12.011, H = 1.008, and O = 15.999, its molar mass is 180.159 g/mol. Values may vary slightly when a different atomic-weight convention or rounding is used.

How does aspirin differ structurally from salicylic acid?
Aspirin has an acetoxy group where salicylic acid has a hydroxyl group. Aspirin is also known as acetylsalicylic acid, reflecting this added acetyl group.

What does the “2” mean in 2-acetoxybenzoic acid?
It identifies the acetoxy substituent’s position on the benzene ring relative to the carboxylic acid group. The groups are on adjacent ring carbons.

Related

Formula used
in mw | Molecular weight | g/mol | 180.159 | 0
in n | Amount of aspirin | mol | 1 | 0
out m | Mass of aspirin | g | n * mw | 3
out molecules | Number of aspirin molecules | molecules | n * 6.02214076e23 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →