This calculator works out sulfuric acid’s molar mass from its chemical formula, H2SO4. Enter the number of atoms of each element and its atomic weight to get the total in grams per mole (g/mol); the defaults calculate the standard formula mass using conventional abridged atomic weights.
Formula
The formula is H2SO4. To calculate its molar mass, multiply the count of each element’s atoms by that element’s atomic weight, then add the results:
M = nHAH + nSAS + nOAO
- M is molar mass, in g/mol.
- nH, nS, nO are the atom counts in one formula unit: 2 hydrogen, 1 sulfur and 4 oxygen.
- AH, AS, AO are the atomic weights used, in g/mol: 1.008, 32.06 and 15.999, respectively.
For the default atomic weights, the calculation is 2 × 1.008 + 1 × 32.06 + 4 × 15.999 = 98.072 g/mol, or 0.098072 kg/mol. Atomic weights are relative averages based on naturally occurring isotopes; the displayed values are conventional abridged values suitable for ordinary chemistry calculations. A particular sample’s exact isotopic composition can produce a slightly different mass.
Worked Example
Using the calculator’s default values:
- Hydrogen contribution: 2 atoms × 1.008 g/mol = 2.016 g/mol.
- Sulfur contribution: 1 atom × 32.06 g/mol = 32.06 g/mol.
- Oxygen contribution: 4 atoms × 15.999 g/mol = 63.996 g/mol.
- Add the contributions: 2.016 + 32.06 + 63.996 = 98.072 g/mol.
- Convert to kilograms per mole: 98.072 g/mol ÷ 1000 = 0.098072 kg/mol.
Assumptions
- The calculation treats the formula as one neutral H2SO4 molecule and uses the atomic weights entered above.
- It calculates formula molar mass, not the concentration, purity, density or amount of a sulfuric acid solution.
- The result is rounded to three decimal places for the main output; the displayed worked example retains extra digits to show the arithmetic.
What the Formula Means
Sulfuric acid is a molecular compound composed of two hydrogen atoms, one sulfur atom and four oxygen atoms per molecule. In the formula H2SO4, the small subscript 2 applies only to hydrogen, and the subscript 4 applies only to oxygen. Sulfur has no written subscript, which means there is one sulfur atom.
Molar mass connects microscopic particles to amounts measured in the laboratory. One mole contains exactly 6.02214076 × 1023 specified entities, and the molar mass tells you the mass of one mole of those entities. Thus, one mole of H2SO4 molecules has a mass of about 98.072 g under the atomic-weight convention used here. This number is not the mass of one molecule; a single molecule has an extraordinarily small mass.
The terms molecular mass and molar mass are related but use different units. Molecular mass is commonly expressed in unified atomic mass units (u) per molecule, while molar mass is expressed in g/mol. Their numerical values are nearly the same for a molecular substance: sulfuric acid is about 98.072 u per molecule and 98.072 g/mol.
Using Molar Mass in Calculations
Once the molar mass is known, it can convert between a mass and an amount of substance. For a pure sample, amount in moles equals mass in grams divided by molar mass in g/mol. Conversely, mass equals amount in moles multiplied by molar mass.
For example, 9.8072 g of pure H2SO4 corresponds to 9.8072 g ÷ 98.072 g/mol = 0.10000 mol. This is a stoichiometric example, not a recommendation to handle that quantity. If the material is a solution rather than a pure substance, its total solution mass cannot be treated as sulfuric acid mass. You would need a valid concentration or composition measurement to find how much H2SO4 it contains.
In reaction calculations, use the balanced chemical equation to determine mole ratios; molar mass alone does not tell you how much of another reactant is needed. In concentration calculations, molarity is moles of solute per litre of final solution. Converting a weighed mass to molarity therefore also requires the solution’s final volume and the identity and purity of the solute.
Common Errors and Limits
- Misreading subscripts: H2SO4 contains four oxygen atoms, not four sulfur atoms. A missing subscript means one atom.
- Adding atomic weights without multiplying: Hydrogen and oxygen occur more than once, so their atomic weights must be multiplied by their respective counts.
- Confusing molar mass with concentration: 98.072 g/mol is not 98.072 g/L or the molarity of a bottle of acid.
- Ignoring composition: Commercial or prepared sulfuric acid solutions contain water and may have a stated purity or concentration. The formula mass applies to H2SO4, not to the entire solution.
- Overstating precision: Atomic weights are commonly reported to limited precision, and measurements of real samples have uncertainty. Reporting many extra digits does not make a result more accurate.
This calculator is a formula-mass tool. It does not determine solution density, acid concentration, pH, purity or the safe amount to use. Those values depend on the sample and conditions, and require appropriate data or measurements.
Safety and Scope
Sulfuric acid is highly corrosive and can cause severe chemical burns; contact with water can release substantial heat. Molar-mass arithmetic is not a handling or preparation procedure. Do not infer dilution instructions from this calculation. For any bench work, follow your lab method, the safety data sheet (SDS) and your supervisor. Use the applicable institutional procedures and appropriate protective equipment, and seek emergency guidance immediately if exposure occurs.
Frequently Asked Questions
What is the chemical formula of sulfuric acid?
Its formula is H2SO4: two hydrogen atoms, one sulfur atom and four oxygen atoms per molecule.
What is the molar mass of H2SO4?
Using H = 1.008, S = 32.06 and O = 15.999 g/mol, the calculated molar mass is 98.072 g/mol, commonly rounded to 98.08 g/mol.
Why do some references say 98.08 g/mol?
References may use slightly different atomic-weight values or round the final answer to two decimal places. With the values shown here, the result is 98.072 g/mol, which rounds to 98.07 g/mol at two decimal places; 98.08 is a frequently quoted approximation.
Is molar mass the same as molecular mass?
They describe related quantities but use different units: molecular mass is expressed in u per molecule, while molar mass is expressed in g/mol. Their numerical values are nearly equal for a given molecule.
How many moles are in a given mass of sulfuric acid?
For pure H2SO4, divide its mass in grams by 98.072 g/mol. For a solution, first establish the mass or amount of sulfuric acid in the solution; the solution’s total mass is not the acid mass.
Related
Formula used
in h | Hydrogen atoms | atoms | 2 | 0 in s | Sulfur atoms | atoms | 1 | 0 in o | Oxygen atoms | atoms | 4 | 0 in ah | Hydrogen atomic weight | g/mol | 1.008 | 0 in as | Sulfur atomic weight | g/mol | 32.06 | 0 in ao | Oxygen atomic weight | g/mol | 15.999 | 0 out mm | Sulfuric acid molar mass | g/mol | h * ah + s * as + o * ao | 3 out kg | Molar mass | kg/mol | mm / 1000 | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp