molecalculator

Moles & Molar Mass

Tablespoon to Gram Conversion Calculator

Calculator No. 01-9382 · Updated · Formula and assumptions shown below

Mass 29.6 g
Volume in teaspoons
6.0 tsp
= Volume × 3
Volume in milliliters
29.6 mL
= Volume × 14.7867648
Volume
2 tbsp
Set in the form below
You enter
Volume (tbsp), Density (g/mL)
You get
Mass (g), Volume in teaspoons (tsp), Volume in milliliters (mL)
Rounding
1 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator converts a volume in tablespoons to a mass in grams for any ingredient, based on its density. You enter the number of tablespoons and the density in grams per milliliter (g/mL), and it returns the equivalent weight in grams. Since tablespoons measure volume and grams measure mass, the conversion depends entirely on what substance you are measuring.

Formula

The conversion uses the standard US definition of a tablespoon: 1 tablespoon = 14.7867648 milliliters. The mass is then the volume times the density:

Mass (g) = Volume (tbsp) × 14.7867648 (mL/tbsp) × Density (g/mL)

Where:

  • Volume is in US tablespoons (tbsp).
  • 14.7867648 is the number of milliliters in one US tablespoon.
  • Density is the mass per unit volume of the substance, in grams per milliliter (g/mL). For water at room temperature, density ≈ 1.00 g/mL.

Worked Example

Using the default values: 2 tablespoons of a substance with density 1.0 g/mL (like water).

  1. Convert tablespoons to milliliters: 2 tbsp × 14.7867648 mL/tbsp = 29.5735296 mL.
  2. Multiply by density: 29.5735296 mL × 1.0 g/mL = 29.5735296 g.
  3. Round to one decimal: 29.6 g.

So 2 tablespoons of water weigh about 29.6 grams. The calculator shows the same result.

Assumptions

  • US legal tablespoon (15 mL is sometimes used in nutrition, but this calculator uses the standard US cooking tablespoon of 14.7868 mL).
  • Density is constant at the given temperature; most cooking ingredients are assumed at room temperature.
  • For dry ingredients, the density is a bulk density (includes air between particles), not the density of the solid material.

Why Density Matters

A tablespoon of feathers weighs far less than a tablespoon of lead, even though both fill the same volume. Density is the bridge between volume and mass. For water, 1 mL weighs 1 gram, so 1 tablespoon ≈ 15 g. But for flour, the bulk density is about 0.5 g/mL, so 1 tablespoon weighs only about 7.4 g. For honey, density ≈ 1.4 g/mL, so 1 tablespoon weighs about 20.7 g. Always check the density of your specific ingredient.

How to Find Density

If you don’t know the density, you can look it up in a reference table, or measure it yourself: weigh a known volume of the substance (e.g., 100 mL) and divide the mass by the volume. For liquids, density is often listed on the label (e.g., milk ~1.03 g/mL, olive oil ~0.91 g/mL). For dry ingredients, density varies with how tightly they are packed, so a spoonful from the bag may differ from a spoonful packed down.

Common Mistakes

  • Using a metric tablespoon (15 mL) instead of US (14.7868 mL): The difference is small, but for large quantities it adds up.
  • Ignoring density: Assuming 1 tbsp = 15 g for everything is only true for water.
  • Packing dry ingredients: Flour, sugar, and cocoa powder have different densities when sifted vs. packed. For baking, use the method your recipe assumes (e.g., spoon and level).
  • Mixing up tablespoons and teaspoons: 1 tablespoon = 3 teaspoons, so 1 tsp ≈ 4.93 mL.

When to Use This Calculator

Use it when you have a recipe in tablespoons but need grams for a nutrition label, a food scale, or a scientific experiment. It is also handy when converting a recipe that uses volume to one that uses weight, which is more accurate for baking. For lab work, remember that a tablespoon is not a precise measuring instrument; use a graduated cylinder or pipette for accuracy.

Limits of the Formula

The formula assumes a uniform density. For mixtures, the density may not be linear. For example, a tablespoon of chocolate chips has a lower bulk density than a tablespoon of melted chocolate. Also, temperature changes density: hot water is slightly less dense than cold water. For most cooking, these differences are negligible, but for precise scientific work, use a balance and a volumetric flask.

Frequently Asked Questions

How many grams are in a tablespoon of butter?

Butter has a density of about 0.911 g/mL. So 1 tbsp = 14.7868 × 0.911 ≈ 13.5 g. Many recipes use 14 g per tablespoon as a round number.

Is a tablespoon 15 mL or 20 mL?

In the US, a tablespoon is 14.7868 mL, often rounded to 15 mL for nutrition labels. In Australia, a tablespoon is 20 mL. Always check which standard your recipe uses.

How many grams are in a tablespoon of sugar?

Granulated sugar has a bulk density of about 0.85 g/mL. So 1 tbsp ≈ 12.6 g. Powdered sugar is lighter, about 0.5 g/mL, giving ~7.4 g per tablespoon.

Can I convert grams back to tablespoons?

Yes, divide the mass by the density and then by 14.7868. For example, 30 g of water (density 1) is 30 / 14.7868 ≈ 2.03 tbsp.

Why does my kitchen scale give a different number?

Your scale measures mass directly, so it is more accurate than a volume conversion. The difference may come from the actual density of your ingredient (e.g., flour that is packed vs. sifted) or from a different tablespoon standard.

What is the density of water in g/mL?

At 4°C, water has its maximum density of 1.000 g/mL. At room temperature (20°C), it is about 0.998 g/mL. For cooking, 1.00 is a good approximation.

Related

Formula used
in tbsp | Volume | tbsp | 2 | 0
in dens | Density | g/mL | 1.0 | 0
out g | Mass | g | tbsp * 14.7867648 * dens | 1
out tsp | Volume in teaspoons | tsp | tbsp * 3 | 1
out ml | Volume in milliliters | mL | tbsp * 14.7867648 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →