Tellurium (Te) has the electron configuration [Kr] 4d10 5s2 5p4. This means its 52 electrons fill the orbitals in the order 1s, 2s, 2p, 3s, 3p, 3d, 4s, 4p, 4d, 5s, and then 5p, with the last four electrons occupying the 5p subshell. This configuration places tellurium in group 16 (the chalcogens) and period 5 of the periodic table, giving it six valence electrons and a chemistry similar to sulfur and selenium.
Formula and Notation
The electron configuration is written using the Aufbau principle: electrons fill orbitals in order of increasing energy. For tellurium (Z = 52), the order is:
- 1s2 (2 electrons)
- 2s2 2p6 (8 electrons)
- 3s2 3p6 3d10 (18 electrons)
- 4s2 4p6 4d10 (18 electrons)
- 5s2 5p4 (6 electrons)
Summing the superscripts: 2 + 2 + 6 + 2 + 6 + 10 + 2 + 6 + 10 + 2 + 4 = 52. The shorthand uses the noble gas core [Kr] (krypton, Z = 36) to represent the first 36 electrons, so the configuration is [Kr] 4d10 5s2 5p4. The superscripts indicate the number of electrons in each subshell.
Worked Example
Let’s construct the configuration for tellurium step by step using the default atomic number 52.
- Start with the lowest energy level: 1s holds 2 electrons → 1s2 (2 total).
- Next 2s holds 2 → 2s2 (4 total).
- 2p holds 6 → 2p6 (10 total).
- 3s holds 2 → 3s2 (12 total).
- 3p holds 6 → 3p6 (18 total).
- 4s holds 2 → 4s2 (20 total).
- 3d holds 10 → 3d10 (30 total).
- 4p holds 6 → 4p6 (36 total). Now the core matches krypton.
- 4d holds 10 → 4d10 (46 total).
- 5s holds 2 → 5s2 (48 total).
- 5p holds the remaining 4 electrons → 5p4 (52 total).
The full configuration is therefore 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p4, which matches the calculator output. The shorthand is [Kr] 4d10 5s2 5p4.
Assumptions
- The configuration follows the Aufbau principle and Madelung rule (n + ℓ ordering).
- No exceptions apply: tellurium does not have a half-filled or fully filled d or f subshell that would cause a deviation (unlike chromium or copper).
- The noble gas core [Kr] is taken as the complete configuration of krypton (Z = 36).
- This is the ground-state configuration for a neutral tellurium atom.
Why This Configuration Matters
The electron configuration of tellurium explains its chemical behavior. With six valence electrons (5s2 5p4), tellurium needs two more electrons to achieve a stable octet, so it commonly forms −2 anions (tellurides, Te2−) and +4 or +6 oxidation states in compounds like TeO2 and TeO3. The presence of the 4d10 filled subshell means tellurium has a larger atomic radius than sulfur and selenium, making it more metallic. Indeed, tellurium is a metalloid, showing both metallic and nonmetallic properties. Its semiconducting behavior and photoconductivity are direct consequences of the band structure arising from this electron arrangement.
How to Write Configurations for Other Elements
You can use the same method for any element:
- Find the atomic number (number of protons = number of electrons in a neutral atom).
- Fill orbitals in order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.
- Stop when you’ve placed all electrons.
- For shorthand, locate the nearest noble gas with a lower atomic number and write its symbol in brackets, then continue from there.
For example, iodine (Z = 53) has one more electron than tellurium: [Kr] 4d10 5s2 5p5. Xenon (Z = 54) has [Kr] 4d10 5s2 5p6.
Common Mistakes and Misconceptions
- Ordering error: Many people write 3d before 4s, but 4s fills first because it has lower energy (n + ℓ rule). For tellurium, the order is 4s2 then 3d10, not the reverse.
- Counting electrons: A common slip is forgetting the 4d10 electrons. Always sum the superscripts to verify you have 52.
- Using [Ar] instead of [Kr]: Tellurium’s core is krypton, not argon. Using [Ar] would be incorrect and would omit the 3d and 4p electrons.
- Thinking Te has 2 valence electrons: The 5s2 electrons are part of the valence shell, so tellurium has 6 valence electrons, not 2.
Comparison with Sulfur and Selenium
Tellurium sits directly below sulfur and selenium in group 16. Their configurations are:
- Sulfur (Z = 16): [Ne] 3s2 3p4
- Selenium (Z = 34): [Ar] 3d10 4s2 4p4
- Tellurium (Z = 52): [Kr] 4d10 5s2 5p4
All have six valence electrons, but the increasing principal quantum number (3, 4, 5) means larger atomic radii and lower electronegativity down the group. Tellurium is the most metallic of the three, which is why it can behave as a semiconductor and form alloys with metals.
Practical Uses and Chemical Context
The electron configuration of tellurium underpins its applications. Tellurium is used in metallurgy (as an additive to steel and copper to improve machinability), in solar panels (cadmium telluride, CdTe, is a photovoltaic material), and in thermoelectric devices (bismuth telluride, Bi2Te3). In compounds, tellurium often exhibits oxidation states of −2, +2, +4, and +6. For example, in hydrogen telluride (H2Te) it is −2, in tellurium dioxide (TeO2) it is +4, and in telluric acid (Te(OH)6) it is +6. These oxidation states are consistent with the number of electrons in the 5s and 5p orbitals available for bonding.
Frequently Asked Questions
What is the full electron configuration of tellurium?
The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p4. The shorthand is [Kr] 4d10 5s2 5p4.
How many valence electrons does tellurium have?
Tellurium has 6 valence electrons: 2 in the 5s subshell and 4 in the 5p subshell. This is typical for group 16 elements.
Why is tellurium’s configuration written as [Kr] 4d10 5s2 5p4 and not [Kr] 5s2 5p4?
Because the 4d subshell is filled after the 4p but before the 5s. In the shorthand, you must include all electrons beyond the noble gas core, which includes the 4d10 electrons. Omitting them would give the wrong configuration and imply tellurium has only 46 electrons.
Does tellurium have any electron configuration exceptions?
No. Unlike chromium or copper, tellurium does not have a half-filled or fully filled d or f subshell that would lower the energy by promoting an electron. Its configuration follows the standard Aufbau order without exceptions.
What is the electron configuration of Te2−?
The Te2− ion has two extra electrons, which fill the 5p subshell to give [Kr] 4d10 5s2 5p6. This is the same electron configuration as the noble gas xenon (Xe).
How does tellurium’s configuration affect its oxidation states?
With six valence electrons, tellurium can either gain two electrons to form Te2− (achieving a noble gas configuration) or lose/share four, five, or six electrons to form positive oxidation states like +4 and +6. The 5s2 pair can remain inert (the inert pair effect), which explains why +4 is more common than +6 for heavier group 16 elements.
When working with tellurium compounds in the lab, always consult the safety data sheet (SDS) and follow your supervisor’s instructions. Tellurium and its compounds are toxic; handle them with appropriate gloves and ventilation.
Related
Formula used
in z | Atomic number Z | - | 52 | 1 | 118 sel type | Configuration type | Full=full, Noble gas core=noble out config | Electron configuration | - | (type == 'full') ? '1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p4' : '[Kr] 4d10 5s2 5p4' | 0 out valence | Valence electrons | - | 6 | 0 out period | Period | - | 5 | 0 out group | Group | - | 16 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED