Thermal conductivity (k) measures how easily heat passes through a material, and you calculate it from the heat flow rate, the temperature difference across the material, its thickness, and the cross-sectional area using the formula k = (Q × L) / (A × ΔT). Enter the heat transfer rate, thickness, area, and temperature difference below to get the thermal conductivity in watts per meter-kelvin (W/m·K).
Formula
The fundamental equation for one-dimensional steady-state heat conduction is Fourier’s law:
k = (Q × L) / (A × ΔT)
- k = thermal conductivity (W/m·K)
- Q = heat transfer rate (watts, W)
- L = thickness of the material in the direction of heat flow (meters, m)
- A = cross-sectional area perpendicular to heat flow (square meters, m²)
- ΔT = temperature difference across the material (kelvin, K)
Note that a temperature difference of 1 K is exactly equal to 1 °C, so you can use either unit for ΔT without converting. The result is in watts per meter-kelvin, which is the SI unit for thermal conductivity.
Worked Example
Using the default values: Q = 10 W, L = 0.05 m, A = 0.25 m², ΔT = 20 K.
Step 1: Multiply the heat flow by the thickness: 10 × 0.05 = 0.5 W·m
Step 2: Multiply the area by the temperature difference: 0.25 × 20 = 5 m²·K
Step 3: Divide the first result by the second: 0.5 / 5 = 0.1 W/(m·K)
The thermal conductivity is 0.100 W/(m·K), matching the calculator output. This value is typical of a lightweight insulating material like fiberglass or mineral wool.
Assumptions
- Steady-state heat flow (temperatures do not change with time).
- One-dimensional heat flow through a flat slab with uniform thickness.
- Homogeneous material with constant thermal conductivity across the temperature range.
- No heat losses from the edges or by radiation or convection.
How Thermal Conductivity Is Measured
In practice, thermal conductivity is rarely calculated from first principles; it is measured using guarded hot plate or heat flow meter apparatus. A sample of known thickness is placed between a hot plate and a cold plate, the heat flow is measured, and the same Fourier equation is applied. For liquids and gases, transient hot-wire or laser flash methods are used. The calculator above is useful for lab exercises, engineering estimates, or when you already have the four measured quantities.
Common Mistakes and Unit Mix-Ups
- Using °C instead of K for ΔT: Fine, because the difference is identical. But never add 273.15 to a temperature difference.
- Confusing thickness with area: Thickness is the distance heat travels; area is the face the heat enters. A 1 m² slab that is 0.1 m thick has L = 0.1, A = 1.
- Mixing units: If Q is in kilowatts, convert to watts (×1000) before using the formula. If area is in cm², convert to m² (÷10,000).
- Forgetting the direction: Thermal conductivity is a material property, not a function of size. Doubling the thickness doubles the resistance but does not change k.
Typical Thermal Conductivity Values
To interpret your result, compare it to familiar materials:
- Diamond: ~1000–2000 W/(m·K) – excellent conductor
- Copper: ~385 W/(m·K)
- Aluminum: ~205 W/(m·K)
- Steel (mild): ~50 W/(m·K)
- Glass: ~1.0 W/(m·K)
- Water: ~0.6 W/(m·K)
- Air (still): ~0.026 W/(m·K)
- Polyurethane foam: ~0.03 W/(m·K)
Values depend on temperature, moisture content, and density. For example, wet insulation conducts more heat than dry insulation because water replaces air.
When to Use This Calculator
Use this calculator when you have measured or simulated heat flow through a flat sample and need the material’s conductivity. It is also useful for reverse problems: if you know k, you can solve for the heat loss through a wall or the required thickness of insulation. For composite walls with multiple layers, calculate the thermal resistance of each layer (R = L/k) and add them; the total heat flow is then ΔT_total divided by the sum of resistances.
Limitations and Real-World Factors
Fourier’s law assumes steady state and no internal heat generation. In real applications, thermal conductivity varies with temperature – for metals it generally decreases with temperature, while for insulators it increases. For anisotropic materials like wood or graphite, conductivity differs by direction. The calculator gives an average value over the temperature range you specify. For precise engineering work, consult published data for the exact material and temperature, and follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
What is the difference between thermal conductivity and thermal resistance?
Thermal conductivity (k) is a material property – it tells you how well a substance conducts heat regardless of its shape. Thermal resistance (R) is a property of a specific piece of material: R = L/k, so it depends on thickness. A thin sheet of copper has low resistance even though copper has high conductivity. The calculator outputs both, so you can see how thickness affects resistance.
Can I use °C instead of K in the formula?
Yes, for temperature differences. Because a change of 1 °C equals a change of 1 K, the difference ΔT has the same numerical value in both scales. However, if you are using absolute temperatures in other formulas (like ideal gas law), you must convert to kelvin.
Why does insulation have low thermal conductivity?
Insulation materials like fiberglass, foam, and wool trap still air in small pockets. Air has a very low thermal conductivity (about 0.026 W/(m·K)), and trapping it prevents convection currents that would carry heat. The solid material itself is a poor conductor too, so the combination resists heat flow effectively.
How do I calculate heat loss through a wall using k?
Rearrange the formula to Q = k × A × ΔT / L. For a wall with area 10 m², thickness 0.2 m, k = 0.04 W/(m·K), and inside/outside temperature difference of 15 K, Q = 0.04 × 10 × 15 / 0.2 = 30 W. That is the steady-state heat loss through that wall.
What is the R-value and how does it relate to k?
R-value (thermal resistance per unit area) is the thickness divided by thermal conductivity: R = L/k, with units m²·K/W. In the US, R-value is often given in imperial units (ft²·°F·h/BTU); to convert, multiply the SI R-value by 5.678. A higher R-value means better insulation.
Does thermal conductivity change with temperature?
Yes, for most materials. Metals generally become less conductive as temperature rises because electron scattering increases. Insulators and semiconductors often become more conductive at higher temperatures. The calculator gives an average value over your specified ΔT; for precise work, use data at the actual operating temperature.
Related
Formula used
in q | Heat flow rate (Q) | W | 10 | 0 in l | Thickness (L) | m | 0.05 | 0 in a | Cross-sectional area (A) | m² | 0.25 | 0 in dt | Temperature difference (ΔT) | K | 20 | 0 out k | Thermal conductivity | W/(m·K) | q * l / (a * dt) | 3 out r | Thermal resistance (R = L/k) | m²·K/W | l / k | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED