molecalculator

Moles & Molar Mass

Titration Calculation PMT: Find the Unknown Concentration

Calculator No. 01-0685 · Updated · Formula and assumptions shown below

Unknown concentration 0.1000 mol/L
Moles of known reagent at endpoint
0.002500 mol
= Known solution concentration × (Known solution volume at endpoint ÷ 1000)
Moles of unknown substance in sample
0.002500 mol
Result, rounded to 6 decimal places
Known solution concentration
0.1 mol/L
Set in the form below
You enter
Known solution concentration (mol/L), Known solution volume at endpoint (mL), Unknown solution volume (mL), Known reagent coefficient, Unknown substance coefficient
You get
Unknown concentration (mol/L), Moles of known reagent at endpoint (mol), Moles of unknown substance in sample (mol)
Rounding
4 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A titration calculation finds the concentration of an unknown solution from the volume and concentration of a known solution needed to react with it. Enter the known solution’s concentration and titration volume, the unknown sample volume, and the balanced reaction’s mole ratio; the calculator returns the unknown concentration in mol/L.

Formula

The calculator uses the balanced equation’s stoichiometric coefficients to convert the known reagent’s endpoint moles into the moles of unknown substance, then divides by the unknown sample’s volume:

nknown = cknown × (Vknown / 1000)
nunknown = nknown × (b / a)
cunknown = nunknown / (Vunknown / 1000)

  • cknown is the known solution concentration in mol/L.
  • Vknown is the known solution volume delivered at the endpoint in mL. Dividing by 1000 converts millilitres to litres.
  • a is the known reagent’s coefficient in the balanced equation; b is the unknown substance’s coefficient. These are positive whole-number stoichiometric coefficients, not measured quantities.
  • Vunknown is the measured sample volume in mL, also converted to litres by dividing by 1000.
  • n represents amount of substance in mol; cunknown is the answer in mol/L.

The coefficients matter because reactants do not necessarily react in a 1:1 mole ratio. For an equation with one mole of known reagent reacting with two moles of unknown, for example, b/a is 2, not 1.

Worked Example

Using the calculator’s default values, a 25.00 mL sample of unknown acid is titrated with 0.100 mol/L known base. The balanced reaction has a 1:1 ratio, so a = 1 and b = 1.

  1. Convert the known solution volume: 25.00 mL / 1000 = 0.02500 L.
  2. Find the known reagent’s moles at the endpoint: 0.100 mol/L × 0.02500 L = 0.0025000 mol.
  3. Apply the mole ratio: 0.0025000 mol × (1 / 1) = 0.0025000 mol of unknown substance.
  4. Convert the unknown sample volume: 25.00 mL / 1000 = 0.02500 L.
  5. Divide moles by sample volume: 0.0025000 mol / 0.02500 L = 0.1000 mol/L.

The result is 0.1000 mol/L. The calculator rounds its headline result to four decimal places, matching this example.

Assumptions

  • The balanced chemical equation correctly represents the reaction, and the entered coefficients describe the known reagent and unknown substance.
  • The recorded volume is the volume delivered when the endpoint is reached, and the known solution concentration is accurate.
  • The reaction proceeds completely according to the equation, without significant side reactions or interfering substances.
  • The unknown sample volume is the aliquot titrated; the calculation uses final measured solution volume only where specified, not the volume of solvent added.

How to Use a Titration Calculation

“Titration calculation PMT” usually refers to the kind of question found in exam practice or a chemistry worksheet. The underlying method is to turn a measured volume and concentration into moles, use the balanced equation to relate moles, and then calculate the requested concentration or other quantity. PMT is not a different chemical formula.

  1. Write and balance the reaction. Identify which coefficient belongs to the known solution and which belongs to the unknown. Do not assume the ratio is 1:1.
  2. Record the endpoint volume. Use the volume of titrant delivered, commonly calculated as final burette reading minus initial burette reading. If a question gives concordant titres or asks for a mean, calculate the appropriate average as instructed.
  3. Calculate known reagent moles. Use n = cV, with volume in litres. For millilitres, divide by 1000 before multiplying by mol/L.
  4. Apply the mole ratio, then calculate the requested quantity. Divide moles by the sample volume in litres to find concentration. If the question instead asks for mass, use the appropriate molar mass after finding moles.

For an unknown substance with coefficient b and known titrant with coefficient a, the mole relationship is nunknown/nknown = b/a. This ratio comes from the balanced equation, not from the measured volumes.

Endpoint, Equivalence Point, and Accuracy

The equivalence point is the theoretical point at which reactants have been added in exactly the stoichiometric amounts specified by the balanced equation. The endpoint is the observed signal used to stop a titration, such as an indicator colour change. A suitable method makes the endpoint close to the equivalence point, but they are not automatically identical.

Small errors in delivered volume can affect the calculated concentration, particularly when the titre is small. For reliable measurements, use the method’s rules for reading a burette, choosing an indicator or other endpoint method, and identifying concordant results. Do not report more significant figures than the measurements justify: a calculator can display extra digits, but it cannot improve the underlying precision.

Where bench work is implied, follow your lab method, the safety data sheet (SDS) and your supervisor.

Common Titration Calculation Mistakes

  • Using mL directly in n = cV. A concentration in mol/L requires volume in litres. Convert mL by dividing by 1000.
  • Reversing the mole ratio. If the equation is aA + bB → products, then nB/nA = b/a. Check which substance is the titrant and which is unknown.
  • Using the burette reading instead of the titre. The delivered volume is final reading minus initial reading, not necessarily the final reading alone.
  • Confusing sample volume with titrant volume. Use titrant volume to calculate titrant moles; use the unknown aliquot volume to find its concentration.
  • Rounding too early. Keep unrounded values through the calculation and round the final answer according to the precision of the data and the question’s instructions.

Frequently Asked Questions

How do I calculate concentration from a titration?
Calculate moles of titrant using concentration × volume in litres, convert those moles using the balanced equation’s ratio, and divide the unknown moles by the unknown sample volume in litres.

Why do I need the balanced equation?
It gives the mole ratio between the titrant and the substance being measured. Without the correct ratio, the moles—and therefore the calculated concentration—may be wrong.

Do I use the initial or final burette reading?
Use the titre delivered: final burette reading minus initial burette reading. Both readings should be taken using the same scale and appropriate reading method.

Is the endpoint the same as the equivalence point?
No. The equivalence point is the stoichiometric point defined by the reaction; the endpoint is the observable signal used to identify it. A suitable endpoint method aims to make the two close.

What if the titration reaction has a 2:1 ratio?
Use the balanced equation’s coefficients in the correct direction. If two moles of known reagent react with one mole of unknown, each mole of known reagent corresponds to 1/2 mole of unknown.

Why does my answer differ from a mark scheme?
Check volume conversions, the titre subtraction, the balanced equation and coefficient ratio, and whether the question expects a mean titre or a particular rounding convention. Also confirm that the same aliquot volume and units were used.

Related

Formula used
in ck | Known solution concentration | mol/L | 0.100 | 0
in vk | Known solution volume at endpoint | mL | 25.00 | 0
in vu | Unknown solution volume | mL | 25.00 | 0
in a | Known reagent coefficient | - | 1 | 0
in b | Unknown substance coefficient | - | 1 | 0
out c | Unknown concentration | mol/L | (ck * (vk / 1000) * b / a) / (vu / 1000) | 4
out n | Moles of known reagent at endpoint | mol | ck * (vk / 1000) | 6
out r | Moles of unknown substance in sample | mol | n * b / a | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →