molecalculator

Moles & Molar Mass

Transcription: DNA to mRNA Explained

Calculator No. 01-8054 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Yes, transcription converts DNA into mRNA. It is the first step of gene expression, where a specific segment of DNA is used as a template to synthesize a complementary messenger RNA (mRNA) molecule. This mRNA then carries the genetic information from the nucleus to the ribosome, where it directs protein synthesis.

Formula

The calculator above computes the molarity (concentration) of a solution from the mass of solute, its molar mass, and the final volume of the solution. The formula is:

Molarity (mol/L) = mass of solute (g) / (molar mass (g/mol) × volume (L))

Where:

  • mass of solute (g) – the amount of the substance you dissolve.
  • molar mass (g/mol) – the mass of one mole of the substance (e.g., for NaCl, 58.44 g/mol).
  • volume (L) – the final volume of the solution, not the volume of solvent added. Convert mL to L by dividing by 1000.

Worked Example

Using the default values from the calculator:

  • Mass of solute (m) = 2.922 g of NaCl
  • Molar mass (mm) = 58.44 g/mol
  • Final volume (v) = 250 mL = 0.250 L

Calculate the molarity:

c = 2.922 g / (58.44 g/mol × 0.250 L) = 2.922 / 14.61 = 0.2000 mol/L (rounded to 4 decimal places)

The calculator shows 0.2000 mol/L. The concentration in millimolar is 0.2000 × 1000 = 200.0 mM.

Assumptions

  • The solute is pure and completely dissolves.
  • The final volume is measured after dissolution (not the volume of solvent used).
  • The molar mass is the formula weight of the anhydrous compound (no water of hydration).
  • Temperature is assumed to be around 25 °C; molarity changes slightly with temperature due to volume expansion.

When to Use This Calculator

This calculator is for preparing solutions in a lab or for homework. You know how much solid you need to weigh out and the final volume you want, and you want to know the resulting concentration. It is also useful to check if a given recipe gives the intended molarity.

How to Read the Result

The molarity (mol/L) tells you the number of moles of solute per liter of solution. A 0.2000 mol/L NaCl solution contains 0.2000 moles of NaCl in every liter. In biology labs, concentrations are often expressed in millimolar (mM) or micromolar (µM); the second output gives you the mM value directly.

Common Mistakes

  • Using solvent volume instead of final volume: If you add 250 mL of water to 2.922 g of NaCl, the final volume might be slightly more than 250 mL. Always dissolve the solute in less solvent, then bring the total volume up to the mark.
  • Unit mix-ups: Forgetting to convert mL to L. The formula requires liters. Divide mL by 1000.
  • Rounding too early: Rounding the molar mass (e.g., using 58.4 instead of 58.44) can change the result. Keep at least 4 significant figures.
  • Molar mass confusion: For hydrated salts (e.g., CuSO₄·5H₂O), the molar mass includes the water molecules. Use the correct formula weight.

Limits of the Formula

This formula assumes ideal dilute solutions. For very concentrated solutions, the volume may not be exactly additive, and the molarity might differ slightly from the calculated value. Also, for substances that dissociate (like salts), the molarity of the compound is not the same as the molarity of individual ions. For example, 1 M NaCl gives 1 M Na⁺ and 1 M Cl⁻.

Frequently Asked Questions

What is the difference between molarity and molality? Molarity (mol/L) is moles of solute per liter of solution. Molality (mol/kg) is moles of solute per kilogram of solvent. Molarity changes with temperature because volume changes; molality does not.

How do I prepare a solution of a specific molarity? Weigh the required mass of solute (mass = molarity × molar mass × volume in liters). Dissolve it in a small amount of solvent, then add solvent until the final volume reaches the desired mark in a volumetric flask.

Can I use this calculator for any solute? Yes, as long as you know the molar mass. For compounds with multiple atoms, sum the atomic weights. For example, glucose (C₆H₁₂O₆) has a molar mass of about 180.16 g/mol.

What if I only have the density of the solution? If you know the density (g/mL), you can convert between mass and volume, but the molarity formula still requires the moles of solute. You would need to know the mass fraction or molality to proceed.

Does temperature affect molarity? Yes, because the volume of the solution expands slightly when heated. For precise work, prepare solutions at the temperature you will use them, or use molality instead.

Why is the final volume not equal to the volume of solvent added? Because the solute occupies space. When you dissolve a solid, the total volume is the sum of the solute’s partial molar volume and the solvent’s volume, which is not exactly additive. Always use a volumetric flask to adjust to the final volume.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →