molecalculator

Moles & Molar Mass

F to C: Fahrenheit to Celsius Conversion Guide

Calculator No. 01-10473 · Updated · Formula and assumptions shown below

Temperature in Celsius 37.00 °C
Temperature in Kelvin
310.15 K
= Temperature in Celsius + 273.15
Temperature in Fahrenheit
98.6 °F
Set in the form below
You enter
Temperature in Fahrenheit (°F)
You get
Temperature in Celsius (°C), Temperature in Kelvin (K)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert Fahrenheit to Celsius, subtract 32 from the Fahrenheit temperature and multiply the result by 5/9. This page provides a calculator that does that instantly, plus the formula, worked examples, and context to help you understand and apply the conversion correctly.

Formula

The relationship between the Fahrenheit and Celsius scales is linear. The exact formula is:

°C = (°F − 32) × 5/9

  • °F — temperature in degrees Fahrenheit (input)
  • °C — temperature in degrees Celsius (result)

The subtraction of 32 aligns the zero points: water freezes at 32 °F but at 0 °C. The factor 5/9 scales the size of one degree: a change of 9 °F equals a change of 5 °C. The calculator also outputs Kelvin, which you get by adding 273.15 to the Celsius value, since 0 °C corresponds to 273.15 K.

Worked Example

Using the default value of 98.6 °F (normal human body temperature):

  1. Subtract 32: 98.6 − 32 = 66.6
  2. Multiply by 5/9: 66.6 × 5/9 = 333/9 = 37.0

So 98.6 °F equals exactly 37.0 °C. The calculator rounds to two decimals, giving 37.00 °C. Adding 273.15 gives 310.15 K.

Assumptions

  • The conversion uses the standard international definitions of the Fahrenheit and Celsius scales.
  • Kelvin conversion assumes the exact offset of 273.15 between Celsius and Kelvin.
  • No rounding is applied to intermediate steps; only the final display is rounded.

When to Use Fahrenheit to Celsius Conversion

You need this conversion whenever you encounter a temperature in Fahrenheit but need to communicate or compute in Celsius (or Kelvin). Common situations include:

  • Cooking recipes from the US, where oven temperatures are given in °F.
  • Weather reports or travel planning between countries using different scales.
  • Scientific work where Celsius or Kelvin is standard, but a device or source gives °F.
  • Medical contexts: body temperature readings from a Fahrenheit thermometer.

For quick mental estimates, the approximate formula is: subtract 30 and divide by 2. This works best for temperatures between about 0 °F and 100 °F, where the error stays under 3 °C. For precise work, always use the exact formula.

How to Read the Result

The Celsius result tells you the same physical temperature on a different scale. A few reference points help you interpret the number:

  • 0 °C (32 °F) — water freezes
  • 20 °C (68 °F) — typical room temperature
  • 37 °C (98.6 °F) — normal human body temperature
  • 100 °C (212 °F) — water boils at sea level

If you are converting a temperature for an oven or a lab procedure, remember that the Celsius value is not a rounded approximation — it is the exact equivalent. For example, 350 °F (a common baking temperature) converts to 176.67 °C, not 175 °C. Many recipes round to 175 °C, which is fine for cooking but not for precise scientific work.

Common Mistakes and Misconceptions

The most frequent error is forgetting to subtract 32 before multiplying. Multiplying the Fahrenheit value directly by 5/9 gives a number that is about 17.8 °C too high. Another common mistake is using 9/5 instead of 5/9, which converts in the wrong direction — that would turn 68 °F into 122.4 °C instead of 20 °C.

A widespread misconception is that 100 °F equals 100 °C. They are not equal: 100 °F is about 37.8 °C. The two scales only coincide at −40 degrees, where −40 °F = −40 °C. This is a useful check: if your conversion of −40 °F does not return −40 °C, you made an arithmetic error.

Another subtle issue: when converting a temperature difference (like a 10 °F increase), do not subtract 32. A temperature change of 10 °F equals a change of 10 × 5/9 = 5.56 °C. The offset of 32 applies only to absolute temperatures, not to intervals.

Alternatives and Related Conversions

If you need Celsius to Fahrenheit, use the inverse formula: °F = (°C × 9/5) + 32. For example, 20 °C × 9/5 = 36, plus 32 gives 68 °F. The calculator on this page only goes one direction, but the inverse is just as simple.

For scientific work, you may also need Kelvin. The conversion is K = °C + 273.15. The calculator provides this as a secondary output. Note that the Kelvin scale has no negative values — absolute zero is 0 K (−273.15 °C or −459.67 °F). The calculator’s minimum input of −459.67 °F reflects this physical limit.

If you are converting temperatures for gas laws (Charles’s law, ideal gas law), always use Kelvin, never Celsius or Fahrenheit, because those scales have arbitrary zero points that break the proportional relationships.

Frequently Asked Questions

What is the formula to convert Fahrenheit to Celsius?
Subtract 32 from the Fahrenheit value, then multiply by 5/9. For example, 212 °F − 32 = 180, and 180 × 5/9 = 100 °C.

Why do we subtract 32 first?
Because the Fahrenheit scale sets the freezing point of water at 32 °F, while Celsius sets it at 0 °C. Subtracting 32 aligns the two zero points so that only the scale size difference (5/9) remains.

Is 100 °F the same as 100 °C?
No. 100 °F converts to about 37.8 °C. The two scales are equal only at −40 degrees (−40 °F = −40 °C).

How do I convert a temperature difference, not an absolute value?
For a difference, do not subtract 32. Multiply the Fahrenheit change by 5/9. A 9 °F rise equals a 5 °C rise.

What is the fastest way to estimate the conversion in my head?
Subtract 30 from the Fahrenheit value and divide by 2. For 68 °F, that gives (68−30)/2 = 19 °C, close to the exact 20 °C. This works best between 0 °F and 100 °F.

At what temperature are Fahrenheit and Celsius the same?
At −40 degrees. Plug −40 into the formula: (−40 − 32) × 5/9 = (−72) × 5/9 = −40. The scales coincide at that single point.

Related

Formula used
in f | Temperature in Fahrenheit | °F | 98.6 | -459.67
out c | Temperature in Celsius | °C | (f - 32) * 5 / 9 | 2
out k | Temperature in Kelvin | K | c + 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →