molecalculator

Moles & Molar Mass

Unit of Pressure in CGS: The Bar

Guide 01-11956 · Updated · Step by step

The unit of pressure in the CGS (centimeter-gram-second) system is the barye (symbol: Ba), defined as 1 dyne per square centimeter (1 dyn/cm²). In practice, however, the more commonly used CGS-derived pressure unit is the bar, which equals 1,000,000 barye (10⁶ dyn/cm²) and is close to standard atmospheric pressure.

Background: Why CGS Has Its Own Pressure Unit

The CGS system was developed in the 19th century as a coherent metric system based on the centimeter, gram, and second. In a coherent system, derived units are products of base units without extra conversion factors. For pressure, force is measured in dynes (1 dyn = 1 g·cm/s²), and area in square centimeters. Thus the natural pressure unit is dyn/cm², which was named the barye (from Greek baros, meaning weight). The barye is extremely small: standard atmospheric pressure is about 1,013,250 barye. To avoid unwieldy numbers, the bar (10⁶ barye) was introduced in the early 20th century, and it remains common in meteorology, oceanography, and high-pressure engineering, even though the SI system now uses the pascal (Pa).

How the Barye and Bar Are Defined

In CGS, the barye is the pressure exerted by a force of one dyne acting on an area of one square centimeter. Since 1 dyne = 1 g·cm/s², the barye can be written as:

  • 1 Ba = 1 dyn/cm² = 1 g/(cm·s²)
  • 1 bar = 10⁶ Ba = 10⁶ dyn/cm² = 10⁵ Pa (exactly)
  • 1 bar ≈ 0.986923 atm (standard atmosphere)

For comparison, 1 pascal = 10 barye, so the barye is a tenth of a pascal. The bar, being 100,000 Pa, is a convenient unit because it is almost exactly one atmosphere, making it useful for tire pressures, scuba tank ratings, and weather maps.

Common Conversions and Examples

When working with CGS pressure units, you will often need to convert to SI or other systems. Here are the key conversions:

  • 1 bar = 100,000 Pa = 100 kPa
  • 1 bar = 1,000 millibar (mbar)
  • 1 atm = 1.01325 bar = 1,013.25 mbar
  • 1 barye = 0.1 Pa = 0.000001 bar
  • 1 psi ≈ 0.0689476 bar

Example: A typical car tire pressure is 2.2 bar. In pascals, that is 2.2 × 100,000 = 220,000 Pa. In barye, it is 2.2 × 10⁶ = 2,200,000 Ba. In atmospheres, it is 2.2 / 1.01325 ≈ 2.17 atm.

Why the Bar Is More Common Than the Barye

The barye is inconveniently small for everyday measurements. Atmospheric pressure at sea level is about 1,013,250 barye, so a weather report would say “1,013,250 barye” instead of “1013.25 millibar.” The bar was created to scale up the unit to a human-friendly magnitude. In the 1920s, the bar was adopted by meteorologists, and it later became standard in high-pressure physics (e.g., diamond anvil cells, where pressures are measured in gigapascals, with 1 GPa = 10 kbar). Today, the bar is not an SI unit, but it is accepted for use with SI because of its practical convenience. The barye, on the other hand, is rarely used outside of older CGS-based textbooks and some specialized physics contexts.

Common Mistakes and Misconceptions

A frequent error is confusing the barye with the bar, or assuming that “CGS pressure” always means the barye. While the barye is the coherent CGS unit, the bar is the more common CGS-derived unit. Another mistake is mixing up dyn/cm² with N/m² (pascal). Since 1 N = 10⁵ dyn and 1 m² = 10⁴ cm², 1 Pa = 10 dyn/cm² = 10 barye. When converting, always write out the factors: to go from bar to Pa, multiply by 10⁵; to go from barye to Pa, divide by 10.

Also, note that the bar is not the same as the “barg” (bar gauge) used in industry, which measures pressure relative to atmospheric pressure. A reading of 2 barg means 2 bar above atmospheric, i.e., about 3 bar absolute. Always check whether a pressure is absolute or gauge.

Practical Use: When to Choose Which Unit

For scientific calculations, SI (pascal) is the standard, but you may encounter CGS units in older literature or in specific fields:

  • Meteorology: millibar (mbar) or hectopascal (hPa) – they are numerically identical (1 mbar = 1 hPa).
  • High-pressure physics: kilobar (kbar) or megabar (Mbar) – 1 kbar = 100 MPa.
  • Engineering (tires, hydraulics): bar is common in Europe and many other regions.
  • Vacuum technology: often uses torr or mbar, where 1 mbar = 0.75 torr.

If you are doing a chemistry or physics calculation that requires SI, convert all pressures to pascals first. If you are reading an old paper that uses barye, multiply by 0.1 to get pascals.

Limitations and Modern Context

The CGS system itself has largely been superseded by SI, but the bar remains a legal unit in many countries for certain applications. The barye is now mostly of historical interest. In modern scientific publications, pressure is almost always reported in pascals (or multiples like kPa, MPa, GPa). However, understanding the barye and bar is essential for interpreting older data, calibrating instruments that still display bar, and working in interdisciplinary fields where CGS units persist. Always check the unit system when reading a pressure value – a missing “bar” vs “barye” can change a number by a factor of a million.

Frequently Asked Questions

What is the CGS unit of pressure?

The coherent CGS unit is the barye (Ba), equal to 1 dyne per square centimeter. However, the bar (10⁶ barye) is the more commonly used CGS-derived unit in practice.

How many barye are in one bar?

One bar equals exactly 1,000,000 barye, or 10⁶ dyn/cm². That is also equal to 100,000 pascals.

Is the bar an SI unit?

No, the bar is not an SI unit. The SI unit of pressure is the pascal (Pa). The bar is accepted for use with SI, but it is not a base or derived SI unit.

Why do meteorologists use millibar instead of pascal?

Meteorologists historically used millibar because 1 mbar is exactly 1 hPa, and the numbers are convenient (e.g., 1013 mbar for standard sea-level pressure). The term “millibar” is still common, though “hectopascal” is officially preferred in SI contexts.

How do I convert barye to pascal?

To convert barye to pascal, divide by 10. For example, 100 barye = 10 Pa. Conversely, 1 Pa = 10 barye.

What is the difference between bar and barg?

Bar is absolute pressure, while barg (bar gauge) is pressure relative to atmospheric pressure. A gauge reading of 2 barg means the absolute pressure is about 3 bar (2 bar + 1 atm). Always confirm which one is meant.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →