A vector triple product calculator evaluates expressions such as a × (b × c) from the components of three vectors, returning the resulting vector. Enter the x, y, and z components of each vector; the calculator applies the cross-product identity and reports the answer in component form.
Formula
This calculator finds a × (b × c), using the vector triple product identity:
a × (b × c) = b(a · c) − c(a · b)
Here, a, b, and c are three-dimensional vectors. The dot product a · c is a scalar, as is a · b; multiplying each scalar by its vector and subtracting gives a vector. In components, the calculator uses the equivalent direct cross-product expansion.
- a = (ax, ay, az): first vector; each component is entered in the same unit.
- b = (bx, by, bz): second vector, in the same component unit.
- c = (cx, cy, cz): third vector, in the same component unit.
- ×: cross product, which returns a vector perpendicular to its two input vectors.
- ·: dot product, which returns a scalar.
For example, the x component of the answer is ay(bxcy − bycx) − az(bxcz − bzcx). The other component expressions follow from the same cross-product rule. The input values are unrestricted signed coordinates, so negative components are valid.
Worked Example
Using the default inputs, a = (1, 0, 0), b = (0, 1, 0), and c = (0, 0, 1). First calculate the inner cross product:
b × c = (bycz − bzcy, bzcx − bxcz, bxcy − bycx) = (1, 0, 0).
Then take the outer product: a × (b × c) = (1, 0, 0) × (1, 0, 0) = (0, 0, 0). The calculator’s component equations give x = 0, y = 0, and z = 0, so its displayed result is (0, 0, 0).
Assumptions
- The calculation uses ordinary three-dimensional Cartesian vector components.
- All components use a consistent coordinate system and the same unit. The result has units equal to the product of the units of b and c, multiplied by the unit of a.
- No rounding is applied until the displayed outputs are formatted to four decimal places.
How the Identity Works
The identity a × (b × c) = b(a · c) − c(a · b) is often called the vector triple product identity or the “BAC–CAB” rule: the result is B times A dot C minus C times A dot B. It turns a nested pair of cross products into dot products and scalar multiplication, which can be easier to simplify by hand or in symbolic work.
The order matters. Cross products are not associative, so a × (b × c) generally does not equal (a × b) × c. The latter has the different identity (a × b) × c = b(a · c) − a(b · c). Parentheses determine which pair is crossed first; a calculator should make that order explicit.
A useful geometric consequence is that a × (b × c) lies in the plane spanned by b and c, since the identity expresses it as a linear combination of those two vectors. It is also perpendicular to b × c, because any vector crossed with b × c is perpendicular to that vector. These properties provide checks on a numerical result.
When to Use a Vector Triple Product Calculator
Use this calculation when a problem specifies a nested cross product, particularly in vector algebra, geometry, and physics. It can reduce repetitive component arithmetic and help verify a hand-derived result. It does not decide whether the chosen vectors or coordinate frame correctly represent a real-world problem; that modeling step remains yours.
- Enter components in the order shown: first a, then b, then c.
- Keep each vector’s x, y, and z coordinates together and preserve any negative signs.
- Check the parentheses in the original expression. This calculator is for a × (b × c), not (a × b) × c.
- Compare the result with the identity b(a · c) − c(a · b), especially when checking work.
Components may be dimensionless, or they may carry units such as metres. If all three vectors have units of metres, the output has units of cubic metres because each nested cross product multiplies component units. If the vectors represent different physical quantities, verify that the resulting dimensions make sense for the problem.
Common Errors and Useful Checks
The most common mistake is changing the order of vectors or dropping parentheses. Cross products are anti-commutative: u × v = −(v × u). Reversing the order changes the sign, while changing which pair is evaluated first can change the result altogether. A second common mistake is using the dot product where a cross product is intended: a dot product returns a scalar, while a cross product returns three components.
For a result R = a × (b × c), check that R · (b × c) is zero, within the expected rounding tolerance. Also check that R can be written as b(a · c) − c(a · b). If b and c are parallel, b × c is zero and the triple product must be zero. If a is perpendicular to both b and c, both dot products in the identity are zero, so the result is also zero.
Small discrepancies between a calculator and hand work can come from rounding intermediate values too early. Keep full precision through both cross products, then round the final components. If inputs are measured or approximate, the displayed digits are arithmetic precision, not evidence that the underlying vectors are known to that accuracy.
Frequently Asked Questions
What does a vector triple product calculator calculate?
It evaluates a nested expression such as a × (b × c) from the three components of each vector and returns the x, y, and z components of the resulting vector.
Is a × (b × c) the same as (a × b) × c?
No. Cross products are not associative. The two expressions generally give different vectors, so parentheses and vector order must be preserved.
What is the vector triple product identity?
The identity is a × (b × c) = b(a · c) − c(a · b). It replaces the nested cross product with two dot products and a vector combination.
Why can the result be zero?
The inner product b × c is zero if b and c are parallel or one is the zero vector. The result also vanishes when a is perpendicular to both b and c, because both dot products in the identity are then zero.
What units should I enter?
Use consistent units for the components of each vector, and make sure the units are compatible across vectors. The output carries the product of the three input vector units; for dimensionless components, it is dimensionless.
Related
Formula used
in ax | Vector a, x component | - | 1 | - in ay | Vector a, y component | - | 0 | - in az | Vector a, z component | - | 0 | - in bx | Vector b, x component | - | 0 | - in by | Vector b, y component | - | 1 | - in bz | Vector b, z component | - | 0 | - in cx | Vector c, x component | - | 0 | - in cy | Vector c, y component | - | 0 | - in cz | Vector c, z component | - | 1 | - out x | Result x component | - | ay * (bx * cy - by * cx) - az * (bx * cz - bz * cx) | 4 out y | Result y component | - | az * (by * cx - bx * cy) - ax * (by * cz - bz * cy) | 4 out z | Result z component | - | ax * (by * cz - bz * cy) - ay * (bx * cz - bz * cx) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculator in Hindi: Meaning, Usage and Examples0.2000 mol/L
- Volume Strength Formula in Terms of Molarity11.20 volumes
- H2O2 Volume Strength to Molarity Calculator0.893 mol/L
- Volume Strength to Molarity: Formula and Calculator0.0409 mol/L
- Molar Volume: Definition, Formula, and Calculator22.414 L/mol
- Molar Volume of a Gas Calculator and Formula22.4140 L/mol