The molarity–volume equation is M = n/V: molarity equals the amount of solute in moles divided by the final solution volume in liters. This calculator finds molarity from a solute’s mass, molar mass, and final volume, and also reports the concentration in millimolar (mM).
Formula
The basic molarity–volume relationship is M = n/V, where M is molarity in mol/L, n is the amount of solute in moles (mol), and V is the final solution volume in liters (L). Rearranged to find the amount of solute, it is n = M × V. These equations link concentration, volume, and quantity of solute.
When the amount is given as a mass rather than moles, convert it using n = m/MM, where m is mass in grams (g) and MM is molar mass in grams per mole (g/mol). Combining the equations gives:
M = m / [MM × (VmL/1000)]
Here, VmL is the final solution volume in milliliters. The factor / 1000 converts mL to L. For the calculator’s second result, mM = M × 1000, because one mol/L equals 1000 mmol/L, or 1000 mM.
Worked Example
The defaults are 2.922 g solute, a molar mass of 58.44 g/mol, and a final solution volume of 250 mL.
- Convert the volume: 250 mL / 1000 = 0.25 L.
- Find the amount of solute: 2.922 g / 58.44 g/mol = 0.05 mol.
- Calculate molarity: 0.05 mol / 0.25 L = 0.2 mol/L, or 0.2000 mol/L to four decimal places.
- Convert to millimolar: 0.2 mol/L × 1000 = 200.00 mM.
The molar mass default, 58.44 g/mol, is the conventional value for sodium chloride, calculated from the abridged standard atomic weights Na = 22.990 and Cl = 35.45 g/mol. The example is arithmetic, not a preparation instruction.
Assumptions
- The entered mass is the mass of the solute, and its molar mass describes that same substance.
- The entered volume is the final solution volume, not the volume of solvent initially measured.
- Mass, molar mass, and volume are entered in the stated units; the calculator converts mL to L explicitly.
- The equation reports analytical molarity from the stated amount and volume. It does not account for chemical reactions, dissociation, purity, or changes in volume unless those are reflected in the input values.
When to Use the Molarity–Volume Equation
Use M = n/V when you know the amount of dissolved substance and the final volume and need its molar concentration. The rearrangement n = M × V is useful for calculating how many moles correspond to a target concentration and volume. If you know mass instead of moles, first divide mass by molar mass.
For instance, a solution containing 0.30 mol of solute in a final volume of 1.5 L has a molarity of 0.30 / 1.5 = 0.20 mol/L. If a calculation instead calls for a target concentration of 0.20 mol/L in 1.5 L, it requires 0.20 × 1.5 = 0.30 mol. The same equation works in either direction; rearrange it for the quantity you need.
In dilution calculations, the related equation M1V1 = M2V2 follows from conserving the amount of solute: the initial and final amounts are equal if no solute is added, removed, or chemically changed. Use compatible volume units on both sides. This dilution relationship is not the same as calculating molarity from mass, though both rely on the definition of molarity.
Choosing Units and Reading the Result
Molarity is conventionally expressed in mol/L, often written M. A result of 0.20 mol/L may also be written 0.20 M. Millimolar is convenient for smaller concentrations: 0.20 M equals 200 mM. The calculator displays both forms, so check the unit label before copying a result into a report or a further calculation.
Keep units consistent. If volume is given in mL, divide by 1000 to obtain L before using mol/L. If you use volume in liters directly, do not divide it by 1000 again. Similarly, grams divided by g/mol yields moles; using a molar mass in kg/mol with a mass in grams without conversion creates a factor-of-1000 error.
Molarity is based on solution volume, which can differ from solvent volume. For a stated final volume, the solute is included in the completed solution volume. A volume of 250 mL of solvent is not necessarily the same as a final solution volume of 250 mL.
Common Errors and Limits
- Using the wrong volume: Use the final solution volume, not the amount of solvent alone.
- Mixing units: Convert mL to L for mol/L, and check that mass and molar mass units cancel to mol.
- Entering the wrong molar mass: Confirm the substance’s formula and whether the stated material is a hydrate, salt, or other form. Different chemical forms can have different molar masses.
- Rounding too early: Keep extra digits through intermediate steps and round the final result to match the precision of the measurements.
The equation gives a concentration based on the inputs; it cannot establish whether those inputs are experimentally accurate. Molarity also depends on solution volume, which can vary with temperature. For high-precision work, use volume and temperature conventions appropriate to the method. The calculation alone does not predict how much of a solute is chemically available, whether it reacts, or whether a solution is ideal.
For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor. Use this calculator for study and lab-planning arithmetic, not as a substitute for a validated procedure.
Frequently Asked Questions
What is the molarity–volume equation?
Molarity is the amount of solute in moles divided by final solution volume in liters: M = n/V. Rearranged, the amount is n = M × V.
How do I calculate molarity from grams?
Divide the mass in grams by molar mass in g/mol to get moles, convert the final volume to liters, then divide moles by liters: M = m/[MM × VL].
Do I use solvent volume or solution volume?
Use the final solution volume. It is the volume of the completed solution, including the dissolved solute, rather than the volume of solvent used at the start.
How do I convert molarity to millimolar?
Multiply mol/L by 1000. For example, 0.20 mol/L × 1000 = 200 mM.
Can I use milliliters in the molarity equation?
Yes, if you convert them to liters first. Divide mL by 1000; using the unconverted number with mol/L makes the calculated concentration 1000 times too small.
Is M₁V₁ = M₂V₂ the same equation?
It is a rearranged conservation relationship used for dilution when the amount of solute stays constant. The definition of molarity remains M = n/V; the dilution equation compares initial and final concentrations and volumes.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculator in Hindi: Meaning, Usage and Examples0.2000 mol/L
- Volume Strength Formula in Terms of Molarity11.20 volumes
- H2O2 Volume Strength to Molarity Calculator0.893 mol/L
- Volume Strength to Molarity: Formula and Calculator0.0409 mol/L
- Molar Volume: Definition, Formula, and Calculator22.414 L/mol
- Molar Volume of a Gas Calculator and Formula22.4140 L/mol