Combustion analysis is a laboratory technique used to determine the elemental composition of a compound, typically an organic substance containing carbon, hydrogen, and sometimes nitrogen, sulfur, or halogens. The method works by burning a precisely weighed sample in excess oxygen and then measuring the masses of the combustion products (usually CO2 and H2O) to calculate the percentage of each element. From these percentages, you can derive the empirical formula of the compound, and if the molar mass is known, the molecular formula.
Formula
The core calculations are straightforward mass-to-mole conversions based on the balanced combustion reactions. For a compound containing carbon, hydrogen, and oxygen, the general combustion reaction is:
CxHyOz + (x + y/4 – z/2) O2 → x CO2 + (y/2) H2O
From the masses of CO2 and H2O, you calculate the mass of carbon and hydrogen in the original sample:
- Mass of C = mass of CO2 × (12.011 g/mol / 44.009 g/mol)
- Mass of H = mass of H2O × (2.016 g/mol / 18.015 g/mol)
Here, 12.011 g/mol is the atomic mass of carbon, 44.009 g/mol is the molar mass of CO2, 2.016 g/mol is the molar mass of H2 (two hydrogen atoms), and 18.015 g/mol is the molar mass of H2O. The mass of oxygen in the sample is found by difference: mass of O = total sample mass – mass of C – mass of H. (If the compound contains nitrogen, sulfur, or halogens, additional measurements are needed; see below.)
Once you have the masses of each element, convert each to moles by dividing by its atomic mass. Then divide all mole values by the smallest one to get the simplest whole-number ratio, which is the empirical formula.
Worked Example
Let’s use the default values from the calculator: a 0.2500 g sample produces 0.4580 g of CO2 and 0.1875 g of H2O. Assume the compound contains only C, H, and O.
- Mass of carbon: 0.4580 g CO2 × (12.011 / 44.009) = 0.1250 g C (rounded to 4 sig figs)
- Mass of hydrogen: 0.1875 g H2O × (2.016 / 18.015) = 0.02098 g H
- Mass of oxygen: 0.2500 g – 0.1250 g – 0.02098 g = 0.1040 g O
- Moles of C: 0.1250 g / 12.011 g/mol = 0.01041 mol
- Moles of H: 0.02098 g / 1.008 g/mol = 0.02081 mol
- Moles of O: 0.1040 g / 16.00 g/mol = 0.00650 mol
- Divide by the smallest (0.00650): C = 1.60, H = 3.20, O = 1.00 → multiply by 5 to get whole numbers: C8H16O5.
The empirical formula is C8H16O5. If the molar mass is 180.16 g/mol, the empirical formula mass is 8(12.011) + 16(1.008) + 5(16.00) = 192.17 g/mol, which is larger than 180.16, so this set of data is inconsistent with the given molar mass. In practice, the empirical formula mass should divide the molar mass; if not, recheck the measurements.
Assumptions
- Complete combustion: all carbon becomes CO2, all hydrogen becomes H2O.
- The sample is pure and dry.
- Any oxygen in the compound is calculated by difference; this assumes no other elements are present.
- Atomic masses are taken from IUPAC standard values (H = 1.008, C = 12.011, O = 16.00).
- The empirical formula gives the simplest ratio, not necessarily the molecular formula.
How Combustion Analysis Works
In a typical setup, a small sample (a few milligrams) is placed in a combustion tube and heated in a stream of pure oxygen gas. The gases produced pass through a series of absorption traps: a tube containing magnesium perchlorate (or similar desiccant) absorbs water, and a tube containing sodium hydroxide (on asbestos or another support) absorbs carbon dioxide. The increase in mass of each tube gives the mass of H2O and CO2 produced. Modern instruments use thermal conductivity detectors or infrared cells instead of absorption tubes, but the principle is identical.
For compounds containing nitrogen, a separate measurement is needed because nitrogen can form N2 gas, which is not absorbed by the usual traps. The Dumas method measures the volume of nitrogen gas, while the Kjeldahl method converts nitrogen to ammonia. Sulfur and halogens require additional traps (e.g., barium sulfate for sulfur, silver halide for halogens).
Choosing the Right Method
Combustion analysis is best for volatile organic compounds that are not too polar. For nonvolatile solids, you may need to mix the sample with an oxidizer like copper(II) oxide to ensure complete combustion. For compounds containing metals or silicon, combustion analysis may not be suitable because metal oxides can be left behind and interfere with mass measurements. In such cases, alternative elemental analysis techniques (e.g., X-ray fluorescence, ICP-MS) are used.
If your compound contains only C, H, and O, the oxygen-by-difference method works well. If it contains nitrogen, you must measure N2 separately; otherwise, the oxygen percentage will be overestimated. Always check the expected elements before choosing the analysis method.
Common Mistakes and Misconceptions
- Forgetting to convert masses to moles: The empirical formula is a mole ratio, not a mass ratio.
- Using the wrong atomic masses: Always use the standard atomic weights (e.g., H = 1.008, not 1.0).
- Assuming oxygen is always present: If the sample contains only C and H, the mass of oxygen is zero, and the empirical formula is calculated from C and H only.
- Rounding too early: Round only at the final step; intermediate values should carry at least 4 significant figures.
- Confusing empirical and molecular formulas: The empirical formula is the simplest ratio; the molecular formula is a whole-number multiple of it, which requires the molar mass.
Costs and Practical Considerations
Combustion analysis is relatively inexpensive compared to other elemental analysis techniques. A traditional gravimetric setup costs a few hundred dollars for glassware and reagents, while a modern CHNS analyzer (carbon, hydrogen, nitrogen, sulfur) can cost tens of thousands of dollars. The main costs are the pure oxygen supply, the absorption reagents, and the time required for each analysis (about 10–20 minutes per sample). For routine work, many labs outsource the analysis to commercial service providers, which charge per sample.
Safety and Scope
Combustion analysis involves high temperatures and pure oxygen, which can cause fires or explosions if not handled properly. Always use a fume hood, follow the lab’s safety protocols, and consult the safety data sheet (SDS) for all reagents. The sample must be free of explosive or reactive impurities. The technique is used for research and quality control; it is not a clinical or medical procedure. For any lab work, follow your lab method, the SDS, and your supervisor.
Frequently Asked Questions
What is the difference between empirical and molecular formula?
The empirical formula shows the simplest whole-number ratio of atoms in a compound, while the molecular formula shows the actual number of each atom in a molecule. For example, glucose has an empirical formula CH2O and a molecular formula C6H12O6. Combustion analysis gives the empirical formula; you need the molar mass to find the molecular formula.
Can combustion analysis determine the structure of a compound?
No, it only gives the elemental composition and empirical formula. It cannot tell you how atoms are connected. To determine structure, you would need additional techniques like IR spectroscopy, NMR, or mass spectrometry.
What if my compound contains nitrogen?
If nitrogen is present, you must measure the nitrogen separately (e.g., by the Dumas method) because it forms N2 gas that is not absorbed by the CO2 trap. Then you can calculate the oxygen by difference after accounting for all elements.
Why is the mass of oxygen calculated by difference?
Because oxygen gas is added in excess during combustion, you cannot measure the oxygen from the compound directly. By subtracting the masses of carbon and hydrogen from the total sample mass, you infer the oxygen mass, assuming no other elements are present.
What is the typical accuracy of combustion analysis?
With careful technique, the percentages of carbon and hydrogen are usually accurate to within ±0.3% absolute. The oxygen percentage (by difference) carries the accumulated errors of the other measurements, so it may be less accurate.