molecalculator

Moles & Molar Mass

Breakeven Analysis Calculator: Fixed & Variable Costs

Calculator No. 01-9943 · Updated · Formula and assumptions shown below

Breakeven point 5,000 units
Breakeven revenue
$125,000
= Breakeven point × Selling price per unit
Fixed costs
$50,000
Set in the form below
Variable cost per unit
$15
Set in the form below
You enter
Fixed costs ($), Variable cost per unit ($), Selling price per unit ($)
You get
Breakeven point (units), Breakeven revenue ($)
Rounding
0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A breakeven analysis calculator works out the sales volume (or revenue) at which total revenue exactly equals total costs, so profit is zero. You enter your fixed costs, variable cost per unit, and selling price per unit, and it returns the breakeven point in units and in sales dollars. This page explains the formula, works through a real example, and covers the common mistakes that make breakeven numbers misleading.

Formula

The breakeven point in units is:

Breakeven units = Fixed Costs ÷ (Selling Price per Unit − Variable Cost per Unit)

The denominator (Selling Price − Variable Cost) is called the contribution margin per unit, because each unit sold contributes that amount toward covering fixed costs. Once fixed costs are covered, that same contribution becomes profit. Breakeven revenue is simply the breakeven units multiplied by the selling price:

Breakeven Revenue = Breakeven Units × Selling Price per Unit

Where:

  • Fixed Costs (fc) – costs that do not change with production volume, such as rent, salaried staff, insurance, and equipment leases. Measured in dollars per period (month, quarter, year).
  • Variable Cost per Unit (vc) – costs that scale directly with each unit produced: raw materials, packaging, direct labor, and sales commissions. Measured in dollars per unit.
  • Selling Price per Unit (sp) – the price you charge for one unit, before discounts or taxes. Measured in dollars per unit.

Worked Example

Using the default values from the calculator above:

  • Fixed Costs = $50,000
  • Variable Cost per Unit = $15
  • Selling Price per Unit = $25

First, calculate the contribution margin per unit:

Contribution Margin = $25 − $15 = $10 per unit

Then divide fixed costs by the contribution margin:

Breakeven Units = $50,000 ÷ $10 = 5,000 units

Breakeven Revenue = 5,000 units × $25 = $125,000

So at 5,000 units sold (or $125,000 in revenue), the business breaks even. Selling one more unit yields $10 of profit; selling one fewer yields a $10 loss (before taxes).

Assumptions

The simple breakeven formula rests on several assumptions that rarely hold perfectly in the real world:

  • Constant selling price – the price per unit does not change with volume (no bulk discounts or price cuts).
  • Constant variable costs – variable cost per unit stays the same regardless of volume (no economies of scale or overtime premiums).
  • Fixed costs are truly fixed – they do not step up at higher production levels (e.g., a second shift or a new warehouse).
  • All units produced are sold – inventory levels do not change.
  • Single product or constant sales mix – if you sell multiple products, the formula assumes the mix stays the same.

When these assumptions break down, the breakeven point is an approximation, not a precise prediction.

How to Use the Breakeven Calculator

Using the calculator is straightforward, but the quality of the output depends entirely on the quality of your inputs. Follow these steps:

  1. Identify fixed costs – list all costs that do not change with production volume over the period you are analyzing. Common examples: rent, salaries, insurance, depreciation, and loan payments.
  2. Identify variable costs per unit – list costs that occur only when you produce a unit: raw materials, packaging, shipping per unit, and piece-rate labor.
  3. Set the selling price – use the actual price you expect to receive, not a list price if you regularly give discounts.
  4. Enter the numbers – the calculator returns the breakeven volume in units and the corresponding revenue.
  5. Compare to your expected sales – if your forecast is well above the breakeven point, you have a margin of safety; if it is close or below, you may need to adjust price or costs.

Common Mistakes and Misconceptions

Several errors routinely distort breakeven calculations:

  • Mixing time periods – if fixed costs are annual but variable costs are per month, the result is meaningless. Always use the same period for all inputs.
  • Forgetting semi-variable costs – costs like utilities often have a fixed base plus a variable component. Split them into fixed and variable parts before entering.
  • Using gross margin instead of contribution margin – gross margin (revenue minus cost of goods sold) is not the same as contribution margin (price minus variable cost). The breakeven formula needs the contribution margin.
  • Ignoring taxes – the breakeven point calculated here is before income tax. If you need an after-tax profit target, you must adjust the formula (see below).
  • Assuming the result is a target, not a floor – breakeven is the minimum to avoid a loss; it is not a profit goal. Many businesses aim for a target profit, which requires selling more than breakeven.

A common related question is: “How do I calculate the sales needed for a target profit?” The formula is simply:

Units for Target Profit = (Fixed Costs + Target Profit) ÷ Contribution Margin per Unit

For example, if the same business wants a $20,000 profit, it needs ($50,000 + $20,000) ÷ $10 = 7,000 units.

Breakeven Analysis for Multiple Products

When a business sells more than one product, the simple formula no longer works directly because each product has a different contribution margin. The standard approach is to use a weighted average contribution margin based on the expected sales mix.

For example, suppose a café sells coffee (contribution margin $1.50) and pastries (contribution margin $2.00), and the sales mix is 60% coffee and 40% pastries. The weighted average contribution margin is:

(0.60 × $1.50) + (0.40 × $2.00) = $0.90 + $0.80 = $1.70 per “composite unit”

If fixed costs are $10,000, the breakeven in composite units is $10,000 ÷ $1.70 ≈ 5,882 composite units. That means about 3,529 coffees and 2,353 pastries (using the 60/40 mix). This method only works if the mix stays constant; if the mix changes, the breakeven point changes.

Limits of Breakeven Analysis

Breakeven analysis is a planning tool, not a crystal ball. It tells you the volume at which you stop losing money, but it does not tell you:

  • Whether that volume is achievable – the market may not support 5,000 units.
  • How price changes affect demand – raising the price lowers the breakeven point, but it may also reduce the number of units customers buy.
  • Cash flow timing – you might break even on paper but still run out of cash because customers pay late.
  • Non-financial factors – brand reputation, employee morale, and competitive response are not captured.

For these reasons, breakeven analysis is best used alongside a full budget and cash flow forecast, not as a standalone decision-maker.

Frequently Asked Questions

What is the difference between breakeven point and margin of safety?

The breakeven point is the sales volume where profit is zero. The margin of safety is how far actual or budgeted sales are above the breakeven point, usually expressed as a percentage: (Actual Sales − Breakeven Sales) ÷ Actual Sales. A higher margin of safety means the business can absorb a sales decline before it starts losing money.

How do I calculate breakeven in dollars instead of units?

Multiply the breakeven units by the selling price per unit. Alternatively, use the contribution margin ratio: Contribution Margin Ratio = (Price − Variable Cost) ÷ Price. Then Breakeven Revenue = Fixed Costs ÷ Contribution Margin Ratio. For the example above, the ratio is $10 ÷ $25 = 0.40, and $50,000 ÷ 0.40 = $125,000.

What if my variable cost is higher than my selling price?

If variable cost per unit exceeds selling price, the contribution margin is negative, and the breakeven formula produces a negative number (or is undefined). This means you lose money on every unit sold, so no sales volume will cover fixed costs. The only solutions are to raise the price or reduce variable costs.

Does breakeven analysis work for service businesses?

Yes, but you need to define the “unit” carefully. For a service business, the unit might be an hour of billable time, a customer served, or a project completed. Variable costs are those that increase with each unit of service, such as materials used or subcontractor fees. Fixed costs are rent, salaries, and software subscriptions.

How often should I recalculate breakeven?

Recalculate whenever your costs or prices change materially, or at least once per quarter. Many businesses also run a breakeven calculation when planning a new product, a price change, or a major investment, because the breakeven point shifts with those decisions.

Is breakeven analysis the same as a break-even chart?

No. Breakeven analysis is the calculation; a break-even chart is a graph that plots total costs and total revenue against volume, with the breakeven point where the two lines cross. The chart visually shows the loss zone below breakeven and the profit zone above it, which can be easier to explain to stakeholders than numbers alone.

Related

Formula used
in fc | Fixed costs | $ | 50000 | 0
in vc | Variable cost per unit | $ | 15 | 0
in sp | Selling price per unit | $ | 25 | 0
out beu | Breakeven point | units | fc / (sp - vc) | 0
out ber | Breakeven revenue | $ | beu * sp | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →