molecalculator

Moles & Molar Mass

Acetone Mass Spectrum: Peaks and Fragmentation

Calculator No. 01-2301 · Updated · Formula and assumptions shown below

Mass-to-charge ratio 58.000 m/z
Ion mass
58.000 Da
= Mass-to-charge ratio × Absolute charge number
Mass-to-charge ratio
58 m/z
Set in the form below
Ion mass
58 Da
Set in the form below
You enter
Mass-to-charge ratio (m/z), Ion mass (Da), Absolute charge number
You get
Mass-to-charge ratio (m/z), Ion mass (Da)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An acetone mass spectrum is the pattern of ion signals produced when acetone molecules are ionized and separated by mass-to-charge ratio (m/z). In a typical electron-ionization spectrum, the molecular ion appears at m/z 58, while a prominent fragment at m/z 43 is often the base peak; exact relative intensities depend on the instrument and measurement conditions.

Formula

This calculator relates an ion’s mass to its mass-to-charge ratio: m/z = mion / |z|. Rearranged, mion = (m/z) × |z|. Here, m/z is the mass-to-charge ratio in daltons per elementary charge (commonly written simply as m/z), mion is the ion mass in daltons (Da), and |z| is the absolute number of charges on the ion. The charge input must be a positive whole number; the sign of an ion does not change the reported m/z.

For a singly charged acetone molecular ion, its nominal mass is 58 Da, so m/z is 58. The calculator handles the arithmetic behind an observed peak; it does not predict which fragments form or their abundances.

Worked Example

Using the default values, the ion mass is 58 Da and the absolute charge number is 1:

  • m/z = 58 Da / 1 = 58 m/z.
  • Ion mass = 58 m/z × 1 = 58 Da.

The displayed results are therefore 58 m/z and 58 Da. These are nominal values for a singly charged ion, not an exact-mass calculation.

Assumptions

  • The entered mass is the mass of the ion being measured, not necessarily the neutral molecule’s mass.
  • The charge magnitude is a positive integer, and m/z is reported as a nonnegative value.
  • Values are nominal unless a sufficiently precise ion mass is supplied; the calculator does not model isotope distributions, ionization, or fragmentation.

Acetone’s Molecular-Ion Peak

Acetone, also called propanone, has the formula C3H6O and molar mass about 58.08 g/mol. Its nominal molecular mass is 58, and the radical cation formed by electron ionization is conventionally written [M]+·. It is therefore associated with a molecular-ion signal near m/z 58 when the ion carries one positive charge.

The molecular ion is not always the tallest signal. Electron ionization transfers enough energy to the molecule that some molecular ions break apart before detection. In acetone’s commonly shown electron-ionization spectrum, m/z 43 is usually especially intense and is often the base peak, defined as the tallest peak in that particular spectrum. A base peak is assigned 100% relative intensity; it does not mean that every molecule produces that ion.

Why the m/z 43 Peak Is Strong

A major route of acetone fragmentation breaks a carbon–carbon bond next to the carbonyl group. The resulting acylium ion, CH3CO+ (also written C2H3O+), has nominal m/z 43. Its formation is favorable enough that this fragment commonly dominates an electron-ionization spectrum. The complementary neutral fragment is a methyl radical, CH3·.

This assignment is a useful starting point, not a rule that every signal at 43 must be acetone’s acylium ion. Mass spectrometry measures m/z, not a molecular structure directly. Identifying a peak requires considering the sample, ionization method, accurate mass where available, and other signals in the spectrum.

How to Read the Spectrum

The horizontal axis is m/z, and the vertical axis usually gives relative abundance or relative intensity. A peak at a given position indicates detected ions with that ratio; its height reflects how many reached the detector under the stated conditions, after data processing. A spectrum often scales its most intense peak to 100.

  • m/z 58: the expected nominal position for singly charged acetone molecular ions.
  • m/z 43: commonly the base peak, consistent with the acetyl/acylium fragment.
  • Other lower-mass signals: may arise from further fragmentation, background, impurities, or overlapping compounds. Assign them using the full spectrum rather than a single peak.

For ordinary singly charged ions, m/z is numerically close to the ion’s mass in daltons. That shortcut fails for multiply charged ions: an ion of mass 58 Da with charge +2 would appear at m/z 29. In mass spectrometry, z means charge number, not atomic number.

What Changes the Spectrum?

Peak positions and relative abundances are shaped by how ions are made and measured. The classic acetone pattern often cited comes from electron ionization, a relatively energetic method that produces reproducible fragmentation useful for library matching. Softer ionization methods can leave more intact molecular ions, or form adducts, so their spectra need not show the same dominant peak pattern.

  • Ionization energy and method: alter how much internal energy ions receive and which pathways are accessible.
  • Instrument and settings: resolution, detector response, source conditions, and data handling affect the recorded pattern.
  • Sample and background: contamination, mixtures, and solvent or air signals can add peaks.
  • Mass convention: nominal masses are rounded whole-number values; exact-mass work uses isotope-specific masses and instrument calibration.

Consequently, m/z 43 being prominent is a typical and recognizable feature, not a guaranteed intensity ratio. For a quantitative comparison or identification, use a reference spectrum collected under comparable conditions and follow the instrument’s validated method.

Common Misreadings and Practical Limits

A frequent misconception is that the tallest peak is the molecular mass. In acetone’s usual electron-ionization spectrum, the tallest peak is commonly m/z 43, while the molecular ion is at m/z 58. Another is to treat every nominal m/z as a unique compound fingerprint. Different ions can share a nominal mass, and mixtures can make overlapping signals.

The calculator above converts between an ion mass and m/z when charge is known. It cannot calculate acetone’s base-peak intensity, reconstruct a complete spectrum, or determine whether an unknown sample is acetone. Those tasks require spectral data and interpretation, ideally checked against a reference and other analytical evidence. Because acetone is volatile and highly flammable, any laboratory handling should follow the relevant safety data sheet, local rules, and the supervised method; a mass spectrum is not a handling or exposure-safety guide.

Frequently Asked Questions

What is the molecular ion peak of acetone?
In a typical electron-ionization spectrum, the acetone molecular ion [M]+· is expected at nominal m/z 58.

Why is acetone’s base peak at m/z 43?
Bond cleavage can form the relatively favorable CH3CO+ acylium ion, whose nominal mass is 43. Its abundance often makes it the tallest peak.

Is m/z 43 the molecular mass of acetone?
No. Acetone’s nominal molecular mass is 58. The m/z 43 signal is generally a fragment ion, not the intact molecular ion.

Does acetone always have the same mass spectrum?
No. The recognizable pattern depends on ionization method, source conditions, instrument, sample purity, and processing. Relative peak heights can vary.

What does m/z mean?
It is an ion’s mass divided by the magnitude of its charge. For a singly charged ion, the numerical value is approximately its mass in daltons; for a doubly charged ion, m/z is half its mass.

Related

Formula used
in mz | Mass-to-charge ratio | m/z | 58 | 0
in im | Ion mass | Da | 58 | 0
in z | Absolute charge number | - | 1 | 1
out mzcalc | Mass-to-charge ratio | m/z | im / z | 3
out imcalc | Ion mass | Da | mzcalc * z | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →