molecalculator

Moles & Molar Mass

Average Km per Litre Calculator and Fuel Economy

Calculator No. 01-6222 · Updated · Formula and assumptions shown below

Average fuel economy 12.50 km/L
Fuel consumption
8.00 L/100 km
= Fuel used × 100 ÷ Distance travelled
Distance travelled
100 km
Set in the form below
Fuel used
8 L
Set in the form below
You enter
Distance travelled (km), Fuel used (L)
You get
Average fuel economy (km/L), Fuel consumption (L/100 km)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An average km per litre calculator works out how far a vehicle travels for each litre of fuel used: divide kilometres driven by litres consumed. Enter your trip distance and fuel used to get the average in km/L, with an optional conversion to L/100 km for comparison.

Formula

The average fuel economy in kilometres per litre is distance divided by fuel used:

km/L = d ÷ f

  • d is the distance travelled, in kilometres (km).
  • f is the fuel consumed, in litres (L).

The calculator also gives fuel consumption in litres per 100 kilometres:

L/100 km = f × 100 ÷ d

These figures describe the same trip in reciprocal forms. The first output is the requested average km/L; the second expresses how much fuel is needed to cover a standard 100 km. Both inputs must be greater than zero to produce meaningful results. Enter distance in kilometres and fuel volume in litres; convert other units before calculating.

Worked Example

Using the calculator’s defaults, the vehicle travels 100 km and uses 8 L.

  1. Average economy: 100 km ÷ 8 L = 12.5 km/L.
  2. Consumption: 8 L × 100 ÷ 100 km = 8.00 L/100 km.

The result is 12.50 km/L, or 8.00 L/100 km, at the displayed precision. The unrounded km/L result is 12.5.

Assumptions

  • The distance and fuel amount refer to the same driving period or trip.
  • The fuel figure represents fuel actually consumed, not merely fuel purchased unless the measurement method makes those amounts equivalent.
  • The calculation reports an average; it does not predict the exact economy of a future trip.
  • Distance is entered in kilometres and fuel volume in litres, with no additional unit conversion in the calculator.

How to Measure a Useful Average

A reliable result depends more on consistent measurements than on extra decimal places. For a practical tank-to-tank estimate, record the odometer reading when filling, refill later under comparable conditions, and note the litres added. If the fuel level is brought back to approximately the same point, the refill amount can serve as an estimate of fuel used over that interval. Divide the kilometres between the readings by the litres used.

For example, if a vehicle travels 420 km and the next comparable refill takes 35 L, its average is 420 ÷ 35 = 12 km/L. If the two readings are taken at different fuel levels, however, litres purchased may not equal litres burned during that distance. A short trip measured from an imprecise gauge can therefore be misleading. Tracking several refills and dividing total kilometres by total litres usually reduces the effect of small measurement differences.

  • Use odometer distance for the same interval covered by the fuel measurement.
  • Keep units consistent: kilometres with litres, not miles with litres or kilometres with gallons.
  • For a longer-term figure, add all relevant kilometres and litres, then divide the totals.
  • Keep full precision during the calculation and round only the final display.

Understanding and Comparing the Result

A larger km/L value means the vehicle travels farther on each litre, so it indicates better fuel economy for the measured conditions. L/100 km runs the other way: a smaller value means less fuel is needed to travel 100 km. This reversal is a frequent source of confusion when comparing specifications from different regions.

To convert between the two measures, use L/100 km = 100 ÷ km/L, or km/L = 100 ÷ (L/100 km). For instance, 10 km/L corresponds to 10 L/100 km. A result of 15 km/L corresponds to about 6.67 L/100 km. Do not compare the numerical values as if they were on the same scale: 15 km/L is not the same as 15 L/100 km.

Fuel economy varies with conditions, so one trip is not a universal rating for a vehicle. Speed, acceleration, traffic, hills, load, tyre condition, weather, air conditioning, and the proportion of city versus highway driving can all affect fuel use. Comparing two vehicles or driving periods is most useful when the measurement method and conditions are reasonably similar.

Common Errors and Calculator Limits

The calculator performs arithmetic only. It cannot correct inaccurate odometer readings, fuel-pump measurements, inconsistent fill levels, or a mismatch between the distance and fuel intervals. It also cannot account for fuel remaining in the tank if the measurement method does not capture it. A displayed result such as 12.50 km/L is not evidence that the underlying measurement is accurate to two decimal places.

  • Mixing units: 100 miles is not 100 km. Convert miles to kilometres by multiplying by 1.609344. Convert US gallons to litres by multiplying by 3.785411784; imperial gallons use 4.54609 L.
  • Using fuel bought as fuel used: A partial refill does not necessarily measure consumption over the same interval unless tank levels are accounted for.
  • Dividing in the wrong direction: Distance divided by fuel gives km/L; fuel divided by distance, multiplied by 100, gives L/100 km.
  • Overinterpreting a short sample: A brief journey or one unusual drive may not represent typical use. Compare longer, consistently measured intervals.

If the calculator returns an unexpectedly high or low value, first verify the distance, litres, units, and date range. Then repeat the calculation with a longer measurement interval rather than changing the formula.

Frequently Asked Questions

How do I calculate average km per litre?
Divide the kilometres travelled by the litres of fuel used. If a vehicle covers 360 km using 30 L, its average is 360 ÷ 30 = 12 km/L.

Is higher km/L better?
Yes. A higher km/L means more distance travelled per litre under the conditions measured. The reciprocal measure, L/100 km, is better when lower.

How do I convert km/L to L/100 km?
Divide 100 by the km/L figure. For example, 12 km/L equals about 8.33 L/100 km. The reverse conversion is also 100 divided by the L/100 km value.

Can I use miles per gallon in this calculator?
Not directly. Convert distance to kilometres and fuel volume to litres first. Also distinguish US gallons from imperial gallons because their litre values differ.

Why does my fuel economy change from trip to trip?
Driving speed, traffic, hills, load, weather, vehicle condition, and measurement variation affect the average. A longer record of comparable trips generally gives a more representative figure.

When to Use an Average

Use this calculation to summarize a particular trip, monitor fuel use over time, or compare driving periods when the measurements are collected consistently. For ongoing tracking, calculate total distance divided by total litres rather than taking a simple average of several separate km/L readings. The total-based calculation correctly weights each interval by the amount of fuel used; averaging trip averages can give short trips the same influence as much longer ones.

For example, if one interval is 100 km at 10 km/L and another is 300 km at 15 km/L, averaging those two rates directly gives 12.5 km/L. But the combined distance is 400 km and combined fuel is 10 L + 20 L = 30 L, so the overall average is 400 ÷ 30 = 13.33 km/L. Use the combined-total method when you want the average across multiple trips.

Related

Formula used
in d | Distance travelled | km | 100 | 0
in f | Fuel used | L | 8 | 0
out k | Average fuel economy | km/L | d / f | 2
out c | Fuel consumption | L/100 km | f * 100 / d | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →