molecalculator

Moles & Molar Mass

Chemical Formula of Ethanol: C2H5OH Explained

Calculator No. 01-8897 · Updated · Formula and assumptions shown below

Molarity of ethanol 1.0000 mol/L
Concentration in millimolar
1,000.00 mM
= Molarity of ethanol × 1000
Mass of ethanol
46.07 g
Set in the form below
Molar mass of ethanol
46.07 g/mol
Set in the form below
You enter
Mass of ethanol (g), Molar mass of ethanol (g/mol), Volume of solution (mL)
You get
Molarity of ethanol (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The chemical formula of ethanol is C2H5OH (or C2H6O). This means each ethanol molecule contains two carbon atoms, six hydrogen atoms, and one oxygen atom. The formula C2H5OH is more informative because it shows the hydroxyl (–OH) group that gives ethanol its characteristic alcohol properties.

Formula

The molecular formula C2H6O can be written in two ways:

  • Molecular formula: C2H6O – shows the actual number of each atom in one molecule.
  • Condensed structural formula: CH3CH2OH or C2H5OH – shows how the atoms are grouped, highlighting the hydroxyl (–OH) group.

The molar mass of ethanol is calculated from its formula:

Molar mass = (2 × 12.011) + (6 × 1.008) + (1 × 15.999) = 46.069 g/mol ≈ 46.07 g/mol.

In the calculator above, you enter the mass of ethanol, its molar mass (default 46.07 g/mol), and the final solution volume. The calculator returns the molar concentration (mol/L) and millimolar concentration (mM). The formula used is:

Molarity (mol/L) = (mass in g ÷ molar mass in g/mol) ÷ (volume in mL ÷ 1000)

Where:

  • m = mass of ethanol (g)
  • mm = molar mass of ethanol (g/mol)
  • v = final volume of solution (mL)

Worked Example

Using the default values from the calculator: mass = 46.07 g, molar mass = 46.07 g/mol, volume = 1000 mL.

Step 1: Convert volume to liters: 1000 mL ÷ 1000 = 1.000 L.

Step 2: Calculate moles of ethanol: 46.07 g ÷ 46.07 g/mol = 1.000 mol.

Step 3: Calculate molarity: 1.000 mol ÷ 1.000 L = 1.000 mol/L.

Step 4: Convert to millimolar: 1.000 mol/L × 1000 = 1000 mM.

The calculator shows 1.0000 mol/L and 1000 mM, matching the manual calculation.

Assumptions

  • Pure ethanol (100% by mass) is used.
  • The solution is at room temperature (density changes are ignored).
  • Final volume is used, not the volume of solvent added.
  • The molar mass is based on standard atomic weights.

Why the Formula Matters

Knowing the exact formula of ethanol is essential for stoichiometry in organic chemistry, fermentation calculations, and preparing solutions of known concentration. For example, when diluting ethanol for a lab experiment, you need the molar mass to convert between mass and moles. The –OH group makes ethanol polar and able to form hydrogen bonds, which explains its high solubility in water and its use as a solvent.

Ethanol is also the active ingredient in alcoholic beverages, but in chemistry it is a reagent, solvent, and fuel. The formula tells you it has two carbons, which distinguishes it from methanol (CH3OH) and propanol (C3H7OH).

Common Mistakes and Misconceptions

  • Confusing ethanol with methanol: Methanol is CH3OH – one carbon less. Methanol is toxic; ethanol is the drinkable alcohol.
  • Writing C2H6O vs C2H5OH: Both are correct, but the latter shows the hydroxyl group. Dimethyl ether (CH3OCH3) also has the formula C2H6O but is not an alcohol.
  • Using 46 g/mol instead of 46.07: For precise lab work, use 46.07 g/mol. Rounding to 46 changes the molarity by about 0.15%.
  • Forgetting to convert mL to L: Molarity is mol/L, so volume must be in liters. Many errors come from using mL directly.

How to Use the Calculator

This calculator is useful when you need to prepare a known volume of ethanol solution at a specific molarity. For example, to make 500 mL of 0.5 M ethanol:

  1. Enter mass of ethanol = 0.5 × 46.07 × 0.5 = 11.52 g.
  2. Enter molar mass = 46.07 g/mol.
  3. Enter final volume = 500 mL.
  4. The calculator will show 0.5000 mol/L.

Always add ethanol to water gradually, not the reverse, to avoid rapid heat release. Use a volumetric flask for accurate final volume.

Safety and Handling

Ethanol is flammable and should be kept away from open flames and sparks. It is also a central nervous system depressant in humans, but in the lab it is used as a solvent and disinfectant. When handling concentrated ethanol, wear gloves and safety goggles. In case of skin contact, rinse with water. For lab work, follow your institution’s safety data sheet (SDS) and your supervisor’s instructions.

Never use methanol or denatured alcohol in place of ethanol in recipes or consumption – denatured alcohol contains toxic additives.

Frequently Asked Questions

What is the difference between C2H5OH and C2H6O?

They are the same molecular formula. C2H6O is the simplest representation, but it does not show how atoms are connected. C2H5OH explicitly shows the hydroxyl group, making it clear that the compound is an alcohol. The isomer dimethyl ether also has the formula C2H6O, so the structural formula is necessary to distinguish them.

What is the molar mass of ethanol?

The molar mass is 46.07 g/mol, calculated as (2 × 12.011) + (6 × 1.008) + (1 × 15.999). This value is used in solution calculations and stoichiometry. For quick estimates, 46 g/mol is often used, but for precise work use 46.07.

Is ethanol the same as alcohol?

In everyday language, “alcohol” usually means ethanol, but in chemistry, alcohols are a class of compounds with a hydroxyl group (–OH) attached to a carbon. Ethanol is the specific two-carbon alcohol. Methanol, propanol, and butanol are also alcohols but have different properties and uses.

Why is ethanol soluble in water?

Ethanol’s hydroxyl group forms hydrogen bonds with water molecules. The short carbon chain (two carbons) does not create a large hydrophobic region, so ethanol mixes with water in all proportions. This is why ethanol is used as a solvent for many polar and non-polar substances.

How do I make a 1 M ethanol solution?

Weigh 46.07 g of pure ethanol and add it to a 1-liter volumetric flask. Then add distilled water up to the 1-liter mark. Mix well. The final concentration is 1.000 mol/L. Always add ethanol to water slowly to avoid splashing.

What is the density of ethanol?

At 20 °C, pure ethanol has a density of about 0.789 g/mL. This means 100 mL of ethanol weighs 78.9 g. Density changes with temperature, so for precise molarity calculations, use mass rather than volume when weighing ethanol.

Related

Formula used
in m | Mass of ethanol | g | 46.07 | 0
in mm | Molar mass of ethanol | g/mol | 46.07 | 0.001
in v | Volume of solution | mL | 1000 | 0.001
out c | Molarity of ethanol | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →