molecalculator

Moles & Molar Mass

Combustion Analysis Cheat Sheet: Steps & Examples

Calculator No. 01-9955 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This combustion analysis cheat sheet explains how to find the empirical formula of a compound from the masses of CO2 and H2O produced when a sample is burned. You enter the sample mass and the masses of CO2 and H2O (plus any other element masses if present), and the calculator returns the mole ratios and the empirical formula. The method works for compounds containing carbon, hydrogen, and optionally oxygen, nitrogen, or sulfur.

Formula

Combustion analysis is based on the conservation of mass. When a compound containing carbon, hydrogen, and oxygen is burned in excess oxygen, all carbon becomes CO2 and all hydrogen becomes H2O. The moles of carbon and hydrogen in the original sample are calculated from the masses of those products:

  • Moles of C = mass of CO2 / molar mass of CO2 (44.009 g/mol)
  • Moles of H = 2 × (mass of H2O / molar mass of H2O) (18.015 g/mol)
  • Moles of O (if not directly measured) = (mass of sample – mass of C – mass of H) / 16.00 g/mol

Each variable is in grams (g) for masses, and the result is in moles (mol). The empirical formula is the smallest whole-number ratio of these moles. If the compound contains nitrogen or sulfur, those elements are measured separately (often as N2 or SO2) and included in the same way.

Worked Example

Using the default values from the calculator: sample mass = 0.250 g, CO2 = 0.550 g, H2O = 0.225 g, and oxygen mass = 0.075 g.

  1. Moles of C = 0.550 g / 44.009 g/mol = 0.012497 mol
  2. Moles of H = 2 × (0.225 g / 18.015 g/mol) = 2 × 0.012490 = 0.024980 mol
  3. Moles of O = 0.075 g / 15.999 g/mol = 0.004688 mol
  4. Divide each by the smallest (0.004688): C: 0.012497/0.004688 = 2.666, H: 0.024980/0.004688 = 5.329, O: 1.000
  5. Multiply by 3 to get whole numbers: C = 8, H = 16, O = 3 → empirical formula C8H16O3

The calculator rounds the ratio to 3 decimal places, so the output shows 2.666 : 5.329 : 1.000, which you then convert to the whole-number ratio.

Assumptions

  • Complete combustion: all carbon forms CO2, all hydrogen forms H2O.
  • No other products (e.g., CO or soot) are formed.
  • The sample is pure and does not contain water of hydration.
  • If oxygen is not measured directly, it is found by difference from the sample mass.
  • Atomic masses used: C = 12.011, H = 1.008, O = 15.999 (IUPAC abridged).

How to Choose the Right Method

Combustion analysis is used for organic compounds, but the exact procedure depends on what elements are present:

  • C, H, and O only – the classic case. Calculate C and H from CO2 and H2O; find O by difference.
  • Contains nitrogen – nitrogen is often measured as N2 gas (Dumas method) or as ammonia. Include the nitrogen mass in the sample.
  • Contains sulfur – sulfur is measured as SO2. Add the sulfur mass to the calculation.
  • Contains halogens – these are usually trapped and measured separately; they do not appear in the CO2/H2O products.

For a quick check, always ensure the sum of masses of C, H, and any other elements equals the sample mass (within experimental error). If it does not, the missing mass is oxygen.

Common Mistakes and Misconceptions

  • Forgetting to multiply by 2 for hydrogen: Each water molecule contains two hydrogen atoms, so moles of H = 2 × moles of H2O. This is the most frequent error.
  • Using the wrong molar masses: Use 44.01 for CO2, 18.015 for H2O, not rounded 44 and 18 unless you are doing quick estimates.
  • Oxygen by difference: If you forget to subtract the masses of C and H from the sample mass, you will overestimate oxygen.
  • Rounding too early: Round only at the end. If you round moles to 2 decimals, you may get a ratio like 1.33 that is actually 4/3.
  • Assuming the empirical formula is the molecular formula: Combustion analysis gives the simplest ratio, not the actual molecule. To get the molecular formula, you need the molar mass (from mass spectrometry or freezing point depression).

Comparison: Combustion Analysis vs. Other Methods

Combustion analysis is the classical method for determining empirical formulas of organic compounds. It is destructive (the sample is burned) and requires a few milligrams of pure material. Modern alternatives include:

  • Mass spectrometry – gives the molecular formula directly (exact mass), but requires more expensive equipment and interpretation.
  • NMR spectroscopy – gives structural information, not directly the formula, but complements combustion data.
  • Elemental analyzers (CHNS) – automated versions of combustion analysis that report %C, %H, %N, %S directly.

The key advantage of combustion analysis is its simplicity and low cost; the disadvantage is that it only gives the empirical formula, and you must know the sample is pure.

Costs and Practical Considerations

In a teaching lab, combustion analysis is inexpensive: the apparatus consists of a furnace, a combustion tube, and absorption traps (magnesium perchlorate for water, sodium hydroxide for CO2). The main costs are the reagents and the time. In a professional lab, an automated CHNS analyzer costs thousands of dollars, but each run is fast (a few minutes) and requires only 1–5 mg of sample. For a student, the practical limit is accuracy: a 1% error in weighing can lead to a wrong empirical formula, so careful technique is essential.

Safety and Scope

Combustion analysis involves high temperatures (800–1000 °C) and the use of strong absorbents (NaOH, Mg(ClO4)2), which are corrosive and hygroscopic. Always follow your lab method, the safety data sheet (SDS), and your supervisor. Never attempt to burn unknown or energetic materials. This calculator is for study and lab-planning arithmetic only; it does not replace a real experiment.

Frequently Asked Questions

How do I find the empirical formula if the compound contains oxygen?

Calculate the mass of carbon (moles C × 12.011) and mass of hydrogen (moles H × 1.008). Subtract both from the sample mass to get the mass of oxygen. Then convert that mass to moles (divide by 16.00). Finally, divide all mole values by the smallest one to get the ratio.

What if the ratio is not a whole number, like 1.5?

Multiply all ratio numbers by the smallest integer that makes them whole. For example, if you get C = 1.5, H = 3, O = 1, multiply by 2 to get C3H6O2. Always check that the multiplied values are integers (within rounding error).

Can combustion analysis give the molecular formula directly?

No, it only gives the empirical formula. To get the molecular formula, you need the molar mass. For example, if the empirical formula is CH2 (mass 14.03 g/mol) and the molar mass is 84.18 g/mol, the molecular formula is (CH2)6 = C6H12.

Why do I need to know the mass of the sample?

You need it to find the mass of oxygen by difference. If you already know the mass of oxygen directly (e.g., from a separate analysis), you can skip the difference step, but the sample mass is still useful as a check that all elements are accounted for.

What is the difference between empirical and molecular formula in combustion analysis?

The empirical formula is the simplest whole-number ratio of atoms, while the molecular formula is the actual number of atoms in one molecule. Combustion analysis gives the empirical formula; the molecular formula is a whole-number multiple of the empirical formula, determined from the molar mass.

How accurate does the weighing need to be?

For a typical 0.1–0.5 g sample, weigh to ±0.001 g (1 mg) to get a reasonable result. A 1 mg error in the CO2 mass can change the carbon moles by about 0.000023 mol, which may shift the ratio by a few percent. In teaching labs, use an analytical balance and repeat the analysis if the ratio is not close to a whole-number multiple.

Related

Formula used
in m | Mass of sample | g | 0.250 | 0
in mco2 | Mass of CO2 produced | g | 0.550 | 0
in mh2o | Mass of H2O produced | g | 0.225 | 0
in mo | Mass of oxygen in sample (if known) | g | 0.075 | 0
out cmol | Moles of carbon | mol | mco2 / 44.009 | 5
out hmol | Moles of hydrogen | mol | (mh2o / 18.015) * 2 | 5
out omol | Moles of oxygen | mol | mo / 15.999 | 5
out ratio | Empirical formula ratio (C:H:O) | - | cmol / min(cmol,hmol,omol) | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →