molecalculator

Moles & Molar Mass

Combustion Analysis Empirical Formula

Calculator No. 01-9956 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Combustion analysis is a laboratory technique used to determine the empirical formula of a compound containing carbon, hydrogen, and sometimes other elements like oxygen, nitrogen, or sulfur. By measuring the masses of carbon dioxide and water produced when a known mass of the compound is burned, you can calculate the moles of carbon and hydrogen in the original sample, then derive the simplest whole-number ratio of atoms — the empirical formula.

Formula

The core of combustion analysis is the conservation of mass. When a compound containing carbon and hydrogen is burned in excess oxygen, all the carbon converts to CO₂ and all the hydrogen to H₂O. The masses of these products let you find the moles of each element in the original sample.

For carbon: nC = mCO₂ / MCO₂, where mCO₂ is the mass of carbon dioxide (g) and MCO₂ = 44.009 g/mol.

For hydrogen: nH = 2 × (mH₂O / MH₂O), because each water molecule contains two hydrogen atoms; MH₂O = 18.015 g/mol.

If the compound also contains oxygen, its mass is found by difference: mO = msample − (mC + mH), where mC = nC × 12.011 g/mol and mH = nH × 1.008 g/mol. Then nO = mO / 15.999 g/mol.

Finally, divide each mole value by the smallest mole value to get the empirical formula subscripts. If the results are not whole numbers, multiply by a common factor (e.g., 2, 3) to obtain integers.

Worked Example

Using the default values: a 0.1000 g sample produces 0.2200 g CO₂ and 0.0900 g H₂O. Assume the compound contains only C, H, and O.

  1. Moles of carbon: nC = 0.2200 / 44.009 = 0.004999 mol
  2. Moles of hydrogen: nH = 2 × (0.0900 / 18.015) = 2 × 0.004996 = 0.009992 mol
  3. Mass of carbon: 0.004999 × 12.011 = 0.06005 g
  4. Mass of hydrogen: 0.009992 × 1.008 = 0.01007 g
  5. Mass of oxygen: 0.1000 − (0.06005 + 0.01007) = 0.02988 g
  6. Moles of oxygen: nO = 0.02988 / 15.999 = 0.001868 mol
  7. Divide by smallest (0.001868): C = 2.68, H = 5.35, O = 1
  8. Multiply by 3 to get whole numbers: C = 8.04 ≈ 8, H = 16.05 ≈ 16, O = 3

Empirical formula: C₈H₁₆O₃. (The calculator shows the ratio as 2.68:5.35:1, but the final step requires manual rounding.)

Assumptions

  • Complete combustion: all carbon becomes CO₂ and all hydrogen becomes H₂O.
  • No other products (e.g., CO, soot) are formed.
  • The sample is pure and dry.
  • If nitrogen or sulfur is present, additional measurements are needed.
  • Atomic weights used: C = 12.011, H = 1.008, O = 15.999, CO₂ = 44.009, H₂O = 18.015 g/mol.

How to Choose the Right Approach

Combustion analysis is most straightforward for compounds containing only carbon, hydrogen, and oxygen. If the compound contains nitrogen, the analysis becomes more complex because nitrogen can produce N₂ gas, which must be measured separately. For sulfur, the product is SO₂, requiring additional traps. For halogens, specialized methods are needed. If you know the compound also contains other elements, you must account for them by difference or with additional measurements.

When the empirical formula is obtained, the molecular formula can be determined if the molar mass is known. The molecular formula is a whole-number multiple of the empirical formula: (empirical formula mass) × n = molar mass. For example, if the empirical formula is CH₂ and the molar mass is 56.11 g/mol, then n = 56.11 / 14.027 ≈ 4, giving C₄H₈.

Common Problems and Misconceptions

  • Rounding too early: Always carry extra significant figures until the final step. Rounding intermediate values can distort the ratio.
  • Forgetting the factor of 2 for hydrogen: Each water molecule has two hydrogen atoms, so moles of H = 2 × moles of H₂O.
  • Assuming oxygen is present: If the compound might be a hydrocarbon, you should check if the masses of C and H add up to the sample mass. If they do, no oxygen is present.
  • Interpreting ratios like 2.5: A ratio of 2.5 means you need to multiply by 2 to get whole numbers (e.g., C₂H₅). Ratios like 1.33 suggest multiplying by 3.

Costs and Practical Considerations

Combustion analysis is a standard service offered by many analytical laboratories. The cost per sample typically ranges from $30 to $100, depending on the institution and whether additional elements are analyzed. The equipment required includes a combustion furnace, gas purification trains, and precise balances. For educational purposes, simpler setups with a Bunsen burner and absorption tubes can be used, but they are less accurate. The technique is widely used in organic chemistry research and quality control.

Safety and Laboratory Practice

Combustion analysis involves high temperatures and the handling of gases. Always follow your lab method, the safety data sheet (SDS) and your supervisor. Use appropriate personal protective equipment, ensure proper ventilation, and never open the combustion tube while it is hot. The absorption chemicals (e.g., magnesium perchlorate for water, Ascarite for CO₂) are hazardous and must be handled with care. Dispose of all waste according to institutional regulations.

Alternatives to Combustion Analysis

If combustion analysis is not available, other techniques can determine empirical formulas:

  • Mass spectrometry: Provides the molecular formula directly from the molecular ion and isotopic patterns.
  • Elemental analysis (CHNS): A similar combustion-based method that also measures nitrogen and sulfur.
  • NMR spectroscopy: Can infer the carbon skeleton and functional groups, but not the exact formula alone.
  • X-ray crystallography: For solid compounds, gives the complete structure including formula.

Each method has its own strengths and limitations; combustion analysis remains a classic and reliable technique for C, H, O compounds.

Frequently Asked Questions

What is the difference between empirical and molecular formula?

The empirical formula is the simplest whole-number ratio of atoms in a compound, while the molecular formula gives the actual number of each atom in one molecule. For example, glucose has a molecular formula C₆H₁₂O₆ but an empirical formula CH₂O. To get the molecular formula, you need the molar mass.

How do I know if the compound contains oxygen?

If the masses of carbon and hydrogen (calculated from the CO₂ and H₂O) add up to less than the original sample mass, the difference is assumed to be oxygen. If they add up to the sample mass, then no oxygen is present. This is the most common way to infer oxygen content.

Why do I get ratios like 1.5 or 2.33?

These ratios indicate that the empirical formula is not yet in whole numbers. For example, a C:H ratio of 1:1.5 means you multiply both by 2 to get C₂H₃. Similarly, 1:1.33 suggests multiplying by 3 to get C₃H₄. Always look for the smallest multiplier that converts all ratios to integers.

Can combustion analysis be used for compounds with nitrogen?

Yes, but it requires additional measurements. The nitrogen is typically converted to N₂ gas, which is measured by gas chromatography or by collecting the gas. The calculation then includes the mass of nitrogen, and the empirical formula is derived from C, H, N, and O (if present).

What is a typical error in combustion analysis?

Common errors include incomplete combustion (soot formation), moisture absorption from the air, and inaccurate weighing. Using a desiccator and ensuring a good oxygen supply can minimize these. The technique is accurate to about ±0.3% for carbon and hydrogen, which is sufficient for most empirical formula determinations.

Related

Formula used
in m | Mass of compound | g | 0.1000 | 0.0001
in mco2 | Mass of CO2 produced | g | 0.2200 | 0.0001
in mh2o | Mass of H2O produced | g | 0.0900 | 0.0001
in mo | Mass of oxygen in compound | g | 0.0000 | 0
out c | Moles of carbon | mol | mco2 / 44.009 | 4
out h | Moles of hydrogen | mol | mh2o / 18.015 * 2 | 4
out o | Moles of oxygen | mol | (m - (c * 12.011 + h * 1.008)) / 15.999 | 4
out ratio | Empirical formula ratio (C:H:O) | - | round(c / min(c,h,o),3) : round(h / min(c,h,o),3) : round(o / min(c,h,o),3) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →