molecalculator

Moles & Molar Mass

Convert ft-lb to Joules: Formula and Examples

Calculator No. 01-4692 · Updated · Formula and assumptions shown below

Energy in joules 13.56 J
Energy in kilojoules
0.01356 kJ
= Energy in joules ÷ 1000
Energy in foot-pounds
10 ft-lb
Set in the form below
You enter
Energy in foot-pounds (ft-lb)
You get
Energy in joules (J), Energy in kilojoules (kJ)
Rounding
2 dp · 5 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert foot-pounds (ft-lb) to joules (J), multiply the value in ft-lb by 1.355817948. For example, 10 ft-lb is 13.55817948 J, or about 13.56 J; this calculator uses the international foot-pound force definition.

Formula

J = ft-lb × 1.355817948, where J is energy in joules and ft-lb is energy in foot-pounds (more precisely, foot-pounds force). The conversion factor follows from the definitions 1 foot = 0.3048 metre exactly and 1 pound-force = 4.4482216152605 newtons. Since 1 joule equals 1 newton-metre, multiplying those factors gives 1 ft-lb = 1.355817948 J to the precision used here. To convert joules back to ft-lb, divide by 1.355817948.

The calculator accepts a nonnegative energy value in ft-lb. Its first result is joules, rounded to two decimal places; the second is the same energy in kilojoules, rounded to five decimal places. The extra result is useful for larger amounts: 1,000 J is 1 kJ.

Worked Example

Using the calculator’s default input, 10 ft-lb:

  1. Convert foot-pounds to joules: 10 ft-lb × 1.355817948 J/(ft-lb) = 13.55817948 J.
  2. Round to the calculator’s two decimal places: 13.56 J.
  3. Convert to kilojoules by dividing by 1,000: 13.55817948 J / 1,000 = 0.01355817948 kJ, shown as 0.01356 kJ.

The ft-lb units cancel in the first multiplication, leaving joules. The unrounded value is retained for the kilojoule conversion before display rounding.

What a Foot-Pound Measures

A foot-pound is a unit of work or energy. One foot-pound of work is done when a force of one pound-force moves an object one foot in the direction of that force. In SI units, work is force multiplied by displacement, so its unit is the newton-metre, called the joule.

Although “ft-lb” is widely used, “lb-ft” is also common, especially for torque. Work and torque can have the same dimensional units, but they describe different things: work is energy transferred through displacement, while torque describes a turning effect around an axis. A torque of 10 lb-ft is not automatically an amount of energy equal to 10 ft-lb; the energy transferred depends on the angle through which the torque acts. For constant torque, rotational work is torque multiplied by angular displacement in radians.

How to Convert ft-lb to Joules

For a direct conversion, multiply by the fixed factor. Keep the original value’s sign if the quantity is a signed change in energy; for ordinary energy magnitudes, enter a nonnegative amount. Examples:

  • 1 ft-lb = 1.355817948 J, approximately 1.356 J.
  • 5 ft-lb = 6.77908974 J, approximately 6.78 J.
  • 25 ft-lb = 33.8954487 J, approximately 33.90 J.
  • 100 ft-lb = 135.5817948 J, approximately 135.58 J.

For a reverse conversion, use J ÷ 1.355817948. Thus, 100 J ÷ 1.355817948 is about 73.76 ft-lb. Avoid using the forward multiplier for the reverse direction; that would make the result larger instead of smaller.

Choosing the Right Foot-Pound Definition

In most modern engineering and conversion contexts, ft-lb means foot-pound force based on the international foot and the avoirdupois pound-force. The international foot is exactly 0.3048 m. Pound-force is a force unit, distinct from pound mass; its standard definition uses standard gravity, exactly 9.80665 m/s², and the international avoirdupois pound, exactly 0.45359237 kg. The conversion factor in this calculator is for that convention.

Older documents may use historical definitions or rounded conversion factors. Small differences can arise from rounding, but routine work generally does not require more digits than the source measurement justifies. If a technical specification names a particular standard or unit convention, follow it rather than silently substituting another definition.

Common Mistakes and Practical Limits

  • Mixing up pound-mass and pound-force: Energy in ft-lb requires a force. A mass expressed in pounds is not itself a force unless acceleration due to gravity and the intended convention are specified.
  • Confusing torque with work: The matching dimensions do not make the quantities interchangeable. For rotation, determine the angular displacement as well as torque.
  • Rounding too early: Keep the full conversion factor through intermediate calculations, then round the final result to match the precision of the input or the task.
  • Assuming precision from a conversion: Converting 10 ft-lb to many decimal places does not make the original measurement more precise. If the input is only known to two significant figures, a result of about 14 J may be more appropriate than 13.55817948 J.

This is a unit conversion, not a measurement of actual energy. It cannot account for friction, losses, changing forces, measurement uncertainty, or whether a reported value was work, stored energy, or a torque rating. Those details must come from the measurement or engineering context.

Frequently Asked Questions

How many joules are in 1 ft-lb?
One international foot-pound force equals 1.355817948 joules. It is often written as approximately 1.356 J.

What is the formula for converting ft-lb to joules?
Multiply the ft-lb value by 1.355817948. For instance, 20 ft-lb × 1.355817948 = 27.11635896 J.

How do I convert joules to ft-lb?
Divide joules by 1.355817948. For example, 50 J is approximately 36.88 ft-lb.

Are ft-lb and lb-ft the same?
The terms can refer to quantities with equivalent unit dimensions, but context matters. Ft-lb commonly labels work or energy, while lb-ft often labels torque. Torque alone does not specify energy transferred.

Is ft-lb a unit of energy or torque?
It can appear in both contexts. Work is energy and is measured in joules; torque is a rotational effect. Check what the number describes, and do not treat a torque value as energy without the relevant angular displacement.

Related

Formula used
in f | Energy in foot-pounds | ft-lb | 10 | 0
out j | Energy in joules | J | f * 1.355817948 | 2
out kj | Energy in kilojoules | kJ | j / 1000 | 5

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →