molecalculator

Moles & Molar Mass

Copper Sulfide Molar Mass & Formula

Calculator No. 01-7389 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Copper sulfide molar mass depends on which copper sulfide you mean: Cu2S (copper(I) sulfide) has a molar mass of 159.16 g/mol, while CuS (copper(II) sulfide) has a molar mass of 95.61 g/mol. This page gives you a calculator to find the molar mass of either compound from its formula, plus the step-by-step arithmetic and the chemistry behind the two common forms.

Formula

The molar mass (M) of a compound is the sum of the atomic weights of its constituent atoms, multiplied by their subscripts in the formula:

M = (number of Cu atoms × atomic weight of Cu) + (number of S atoms × atomic weight of S)

  • Cu2S: M = (2 × 63.55 g/mol) + (1 × 32.06 g/mol) = 127.10 + 32.06 = 159.16 g/mol
  • CuS: M = (1 × 63.55 g/mol) + (1 × 32.06 g/mol) = 95.61 g/mol

Atomic weights used here are the IUPAC abridged standard values: copper 63.55 g/mol, sulfur 32.06 g/mol. In the calculator, the molar mass is selected by the formula dropdown, and the mass of the sample is entered in grams. The calculator returns the number of moles, and also splits the sample into the mass of copper and sulfur it contains.

Worked Example

Using the default values: a 15.916 g sample of Cu2S.

  1. Molar mass of Cu2S = 159.16 g/mol.
  2. Moles = mass / molar mass = 15.916 g / 159.16 g/mol = 0.1000 mol.
  3. Mass of copper = moles × atomic weight of Cu × 2 = 0.1000 mol × 63.55 g/mol × 2 = 12.710 g.
  4. Mass of sulfur = moles × atomic weight of S = 0.1000 mol × 32.06 g/mol = 3.206 g.

Check: 12.710 g + 3.206 g = 15.916 g, which matches the sample mass.

Assumptions

  • The sample is pure copper sulfide with no hydration or other impurities.
  • Atomic weights are the IUPAC abridged standard values; natural isotopic variation is negligible for most lab work.
  • The formula is stoichiometrically exact (Cu2S or CuS), not a mixture or non-stoichiometric phase.

Why There Are Two Copper Sulfides

Copper can exist in two common oxidation states: +1 (cuprous) and +2 (cupric). That gives rise to two distinct sulfides:

  • Copper(I) sulfide, Cu2S – also called cuprous sulfide or chalcocite. It is a black or dark gray solid that occurs naturally as the mineral chalcocite. It is the more common form in many ores.
  • Copper(II) sulfide, CuS – also called cupric sulfide or covellite. It is a dark blue-black solid, found as the mineral covellite. It is less common in bulk but appears in many laboratory reactions.

When you see “copper sulfide” without a Roman numeral, it usually refers to Cu2S because that is the most stable and abundant form. But always check the context – a lab protocol will specify CuS or Cu2S.

How to Calculate Molar Mass for Any Copper Sulfide

The method is the same for any chemical formula:

  1. Write the correct formula with subscripts.
  2. Look up the atomic weight of each element (periodic table).
  3. Multiply each atomic weight by the subscript.
  4. Sum all the products.

For example, if you have a hydrated copper sulfide or a mixed phase, you would include water molecules (add 18.015 g/mol per water) or adjust for the exact stoichiometry. The calculator above handles the two pure forms.

Common Mistakes and Misconceptions

  • Using the wrong formula: Cu2S vs CuS – a 10 g sample of CuS contains about 1.9 g more sulfur than the same mass of Cu2S. Always confirm which compound you have.
  • Forgetting the subscript: In Cu2S, the subscript 2 applies to copper, so you must multiply copper’s atomic weight by 2, not 1.
  • Mixing up mass and moles: Molar mass is grams per mole, not grams per molecule. One mole of Cu2S contains 6.022 × 1023 formula units.
  • Rounding too early: If you round atomic weights to whole numbers (Cu=64, S=32), you get 160 g/mol for Cu2S, which is off by 0.84 g/mol – enough to cause a 0.5% error in concentration calculations.

Practical Applications

Knowing the molar mass of copper sulfide is essential in several real-world contexts:

  • Stoichiometry: When copper reacts with sulfur, the product is Cu2S. If you start with 10 g of copper, you can calculate the theoretical yield of Cu2S using molar masses.
  • Mineral analysis: Geologists use molar masses to convert between mass percent of copper and the amount of chalcocite or covellite in an ore sample.
  • Laboratory synthesis: If you need 0.5 mol of CuS, you weigh out 0.5 × 95.61 = 47.805 g of the solid.
  • Environmental chemistry: Copper sulfide is used in some water treatment processes; knowing its molar mass helps prepare precise concentrations.

Frequently Asked Questions

What is the molar mass of Cu2S?

The molar mass of copper(I) sulfide (Cu2S) is 159.16 g/mol. This is calculated as (2 × 63.55) + 32.06 = 159.16 g/mol.

What is the molar mass of CuS?

The molar mass of copper(II) sulfide (CuS) is 95.61 g/mol, from 63.55 + 32.06.

Why does copper sulfide have two different molar masses?

Because copper can be in the +1 or +2 oxidation state, forming two different compounds: Cu2S and CuS. They have different stoichiometries, so different molar masses.

How many grams of copper are in 100 g of Cu2S?

In Cu2S, copper makes up (127.10 / 159.16) × 100 = 79.85% by mass. So 100 g of pure Cu2S contains 79.85 g of copper.

Is copper sulfide soluble in water?

No, both Cu2S and CuS are essentially insoluble in water. Their solubility product constants are extremely small (Ksp around 10-48 for CuS). This is why they precipitate out of solution in many reactions.

How do I convert from mass of copper sulfide to moles?

Divide the mass by the molar mass. For example, 31.83 g of Cu2S is 31.83 / 159.16 = 0.2000 mol. Use the calculator above for quick conversion.

Related

Formula used
in m | Mass of sample | g | 15.916 | 0
sel f | Formula | Cu2S=159.16, CuS=95.61 | 159.16
out n | Moles of copper sulfide | mol | m / f | 4
out mcu | Mass of copper in sample | g | m * ( (f == 159.16 ? 127.09 : 63.55) / f ) | 3
out ms | Mass of sulfur in sample | g | m * ( (f == 159.16 ? 32.06 : 32.06) / f ) | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →