molecalculator

Moles & Molar Mass

Cu Ft per Liter: Convert Liters to Cubic Feet

Calculator No. 01-6225 · Updated · Formula and assumptions shown below

Volume 3.531467 ft³
Volume
0.100 m³
= Volume ÷ 1000
Volume
100 L
Set in the form below
You enter
Volume (L)
You get
Volume (ft³), Volume (m³)
Rounding
6 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

One liter equals 0.0353147 cubic feet (ft³), so convert liters to cubic feet by multiplying the liter value by 0.0353147. This calculator converts a volume in liters to cubic feet and also shows the equivalent in cubic meters for context.

Formula

The conversion is: cubic feet = liters × 0.035314666721489. In symbols, ft³ = L × 0.035314666721489. Here, L is the volume in liters and ft³ is the same volume in cubic feet. The calculator’s second result is cubic meters: m³ = L ÷ 1000, because one cubic meter contains 1,000 liters.

The conversion factor follows from the exact definitions: one liter is 0.001 cubic meters, and one foot is exactly 0.3048 meters. A cubic foot is therefore 0.3048³ = 0.028316846592 cubic meters. Dividing 0.001 m³ by 0.028316846592 m³ per ft³ gives about 0.035314666721489 ft³ per liter. The calculator uses this unrounded factor internally and displays the cubic-foot result to six decimal places.

Worked Example

For the default input of 100 L:

  • Convert to cubic feet: 100 × 0.035314666721489 = 3.5314666721489 ft³, which rounds to 3.531467 ft³.
  • Convert to cubic meters: 100 ÷ 1000 = 0.100 m³.

Thus, 100 liters is about 3.531467 cubic feet. The displayed precision is a rounding choice, not a claim that a measured container’s capacity is known to that many decimal places.

Assumptions

  • The input is a volume in liters, and the requested output is the same volume expressed in cubic feet.
  • The conversion is a mathematical unit conversion; it does not depend on the substance, temperature, pressure, or material inside the container.
  • Input values are nonnegative. The displayed digits may be rounded to suit practical use.

What a Cubic Foot and a Liter Measure

Both liters and cubic feet measure volume: the amount of three-dimensional space occupied by a liquid, gas, or object. A liter is a metric unit equal to one cubic decimeter, or 1,000 cubic centimeters. A cubic foot is the volume of a cube whose sides are each one foot long.

The units belong to different measurement systems. Liters are widely used in metric contexts, including beverage containers and many laboratory measurements. Cubic feet are common in the United States for describing room space, storage capacity, and some appliances. Converting between them lets you compare specifications that use different units.

“Cu ft” is a common abbreviation for cubic feet; the symbol is ft³. A cubic foot is not the same as a foot, which measures length. Nor is it the same as a square foot (ft²), which measures area. The exponent matters: a volume conversion uses the cube of a length conversion, not the length factor alone.

Quick Conversions and Practical Examples

To convert a volume in liters, multiply by 0.0353147. To reverse the calculation, divide cubic feet by 0.0353147, or multiply by 28.3168, to estimate liters. The reverse factor is rounded here; use the full factor when precision matters.

  • 1 L ≈ 0.035315 ft³.
  • 10 L ≈ 0.353147 ft³.
  • 50 L ≈ 1.765733 ft³.
  • 100 L ≈ 3.531467 ft³.
  • 1,000 L ≈ 35.314667 ft³, which is 1 m³.

For example, a 60-liter storage box has a volume of about 60 × 0.0353147 = 2.11888 ft³. That conversion describes its stated internal volume only if the 60-liter figure refers to usable interior capacity. Exterior dimensions can produce a larger apparent volume because walls, insulation, lids, and rounded corners take up space.

Capacity, Dimensions, and Measurement Limits

A volume conversion cannot establish whether an item will fit in a space. Cubic feet describe total volume but not shape: a long, narrow container and a compact cube can have identical volumes. For fit, compare the object’s length, width, and height with the available dimensions, allowing for handles, clearance, and openings.

Container capacities also depend on how the figure was defined. A nominal capacity may include space that should not be filled, while a usable capacity can account for internal fittings or a safe fill line. If you need to buy or transport an item, check whether the published value refers to interior volume, exterior volume, or usable capacity.

For irregular objects, a simple length-times-width-times-height calculation gives the volume of a rectangular bounding box, not necessarily the object itself. Likewise, the capacity of a box with rounded edges may be smaller than the product of its maximum internal dimensions. Use a stated capacity or an appropriate measurement method when the exact value matters.

Common Conversion Mistakes

  • Using the factor backward: liters to cubic feet requires multiplication by about 0.0353147. Cubic feet to liters requires multiplication by about 28.3168.
  • Confusing feet with cubic feet: 1 ft = 0.3048 m is a length conversion. For volume, cube the length factor: 1 ft³ = 0.028316846592 m³.
  • Mixing area and volume: ft² cannot be converted to liters without a depth or height measurement.
  • Rounding too early: keep the full conversion factor through the calculation, then round the final result to a sensible precision.
  • Assuming capacity equals fit: equal volumes do not imply equal dimensions or compatible shapes.

Frequently Asked Questions

How many cubic feet are in one liter?
One liter is approximately 0.0353147 cubic feet. The exact conversion can be derived from the definitions of the liter and foot.

How many liters are in one cubic foot?
One cubic foot is exactly 28.316846592 liters. For everyday estimates, 28.3168 liters is usually sufficient.

How do I convert liters to cubic feet?
Multiply the number of liters by 0.035314666721489. For example, 20 L × 0.035314666721489 ≈ 0.706293 ft³.

Is a cubic foot bigger than a liter?
Yes. One cubic foot holds about 28.3168 liters, so it is more than 28 times the volume of one liter.

Does this conversion change with temperature?
No. The unit conversion factor does not change. However, the actual volume of some materials can change with temperature, and a container’s stated capacity may be measured under particular conditions.

Can I use cubic feet to work out whether something will fit?
Not by volume alone. Cubic feet compare total space, but you also need the object’s dimensions and shape and the opening dimensions of the space it must pass through.

Related

Formula used
in l | Volume | L | 100 | 0
out ft3 | Volume | ft³ | l * 0.035314666721489 | 6
out m3 | Volume | m³ | l / 1000 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →