molecalculator

Moles & Molar Mass

Cubic Foot to Cubic Liter Conversion Calculator

Calculator No. 01-6387 · Updated · Formula and assumptions shown below

Volume 28.3168 L
Volume
0.028317 m³
= Volume × 0.028316846592
Volume
1 ft³
Set in the form below
You enter
Volume (ft³)
You get
Volume (L), Volume (m³)
Rounding
4 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Convert cubic feet to cubic liters by multiplying the volume in cubic feet by 28.316846592; one cubic foot equals exactly 28.316846592 liters. Enter a volume in cubic feet to get its equivalent in liters, with the formula and a cubic-meter conversion shown for context.

Formula

Liters = cubic feet × 28.316846592. In symbols, L = ft³ × 28.316846592 L/ft³, where ft³ is the input volume in cubic feet and L is the corresponding volume in liters. The conversion factor is exact: a foot is defined as 0.3048 meters, so one cubic foot is (0.3048 m)³ = 0.028316846592 m³. Since one liter is exactly 0.001 m³, that is 28.316846592 liters.

The second result converts the same volume to cubic meters: m³ = ft³ × 0.028316846592. A liter is a unit of volume, and a cubic liter is not a standard separate unit; the usual request “cubic foot to cubic liter” means converting cubic feet to liters.

Worked Example

Using the calculator’s default input of 1 ft³:

  • Liters: 1 ft³ × 28.316846592 L/ft³ = 28.316846592 L, or 28.3168 L rounded to four decimal places.
  • Cubic meters: 1 ft³ × 0.028316846592 m³/ft³ = 0.028317 m³ rounded to six decimal places.

For a different input, multiply it by the same factor. For example, 5 ft³ is 5 × 28.316846592 = 141.58423296 L, or about 141.5842 L. Keep extra digits during the calculation, then round the final value to match the precision needed.

Assumptions

  • The input is a volume measured in cubic feet, not a length measured in feet.
  • The international foot definition and exact liter-to-cubic-meter relationship are used.
  • The output is a geometric volume conversion; it does not depend on the material, temperature, or density.

What a Cubic Foot Measures

A cubic foot is the volume of a cube with sides one foot long. It is a three-dimensional unit: length × width × height. For a rectangular space measured in feet, multiply its three dimensions to find the volume in cubic feet, then convert that result to liters.

For instance, a container measuring 2 ft by 1 ft by 1 ft has a volume of 2 ft³. Its capacity is 2 × 28.316846592 = 56.633693184 L, about 56.6337 L. The conversion does not tell you how much the contents weigh. Weight or mass depends on what fills the space and its density.

Liters are common in metric measurements of liquid capacity, while cubic feet often describe room, appliance, storage, or construction volumes. Converting between them lets you compare measurements without changing the underlying amount of space.

How to Convert a Measured Volume

  1. Identify the volume in cubic feet. If you have dimensions instead, multiply length × width × height, using feet for all three measurements.
  2. Multiply the cubic-foot value by 28.316846592 to obtain liters.
  3. Round only at the end. For ordinary estimates, one or two decimal places may be sufficient; for specifications, use the precision required by the relevant document or measurement.

If dimensions are in different units, convert them to a common unit before multiplying. Multiplying feet by inches without first converting one measurement can produce a result with inconsistent units. Also distinguish a volume from a linear measurement: converting 3 feet of length into liters is not meaningful unless the other dimensions or a volume are known.

Useful Conversions and Comparisons

  • 1 ft³ = 28.316846592 L (exact).
  • 1 ft³ = 28,316.846592 mL, because each liter is 1,000 milliliters.
  • 1 ft³ = 0.028316846592 m³.
  • 1 L ≈ 0.0353147 ft³, useful for converting in the opposite direction.

For a quick mental estimate, multiply cubic feet by 28.3. This is convenient for rough comparisons, but it is not as precise as using the full factor. For example, 10 ft³ is exactly 283.16846592 L; using 28.3 gives 283 L, a difference of about 0.17 L. That small difference may be unimportant for an informal estimate but unsuitable where a specification requires greater precision.

A cubic foot and a liter are both volume units, but they belong to different measurement systems and differ substantially in size. One cubic foot is a little over 28 liters, not 100 liters and not one liter. The conversion factor applies to volume; it does not convert cubic feet into kilograms, pounds, or any other measure of mass.

Common Mistakes and Limits

The most common error is confusing cubic feet with square feet or feet. Square feet measure area; feet measure length. Neither can be converted directly to liters because liters measure volume. A volume requires three dimensions, or a volume value that has already been calculated.

Another frequent mistake is cubing the conversion factor twice. If a volume is already stated in ft³, multiply it directly by 28.316846592. The factor has already accounted for the three dimensions. If converting a single length from feet to meters, use 0.3048; only when deriving a cubic-meter conversion from cubic feet is the length factor cubed: (0.3048)³ = 0.028316846592.

Rounding can also cause apparent disagreement. The exact conversion factor does not change, but a calculator may display fewer digits. Compare results at the same decimal precision, and do not infer that a rounded value is an exact capacity. The conversion also gives the volume of a shape or space, not necessarily the usable capacity of a container: walls, fittings, fill limits, and internal geometry can reduce the amount it holds.

Frequently Asked Questions

How many liters are in one cubic foot?
One cubic foot is exactly 28.316846592 liters, commonly rounded to 28.32 L.

What is the formula for cubic feet to liters?
Multiply the number of cubic feet by 28.316846592. For example, 3 ft³ × 28.316846592 = 84.950539776 L.

How many liters are in 2 cubic feet?
Two cubic feet equal 56.633693184 liters, or about 56.63 L.

Is a cubic liter the same as a liter?
“Cubic liter” is not the usual unit name. A liter is already a unit of volume, equal to one cubic decimeter or 0.001 cubic meter.

How do I convert liters back to cubic feet?
Divide liters by 28.316846592, or multiply liters by approximately 0.0353147, to get cubic feet.

Does converting cubic feet to liters change the weight?
No. It changes only the way the volume is expressed. To determine mass or weight, you also need the substance’s density and the appropriate units.

Related

Formula used
in ft3 | Volume | ft³ | 1 | 0
out l | Volume | L | ft3 * 28.316846592 | 4
out m3 | Volume | m³ | ft3 * 0.028316846592 | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →